Commit Graph

110 Commits

Author SHA1 Message Date
Marcel Moolenaar
618c18c7c3 Reset the text attributes when initializing the console. The EFI
loader typically doesn't do this so that we end up booting the
with whatever the EFI loader has set it to last.
2004-03-09 04:00:33 +00:00
Marcel Moolenaar
317872f26c Don't create a mapfile during link. It's not needed for the build. 2004-02-13 04:45:41 +00:00
Marcel Moolenaar
a02efe9a7c o Don't build with -fpic. It's not needed and inconsistent with how
other constributions are compiled.
o  Remove powerpc specific additions to CFLAGS.
2004-02-13 04:43:41 +00:00
Ruslan Ermilov
5c8f32a869 Tidy up makefiles.
Tested by:	marcel
2004-02-12 08:10:34 +00:00
David E. O'Brien
c990f469a7 Convert to __FBSDID. 2004-01-04 23:30:47 +00:00
John Baldwin
1696e797f4 Fix typo in comment. 2003-12-10 19:08:09 +00:00
Marcel Moolenaar
e4ec6fb518 Don't hardcode unit 0 for the current device if we're loaded from an
EFI file system. When booting from a CD and there's already an EFI
system partition on the disk, setting the current device to unit 0
will select the harddisk. This invariably breaks installing FreeBSD
when other operating systems have been installed before.

We obviously want to do the same when we're booting over the network.
Maybe later.

Based on a patch (from memory) from: arun
2003-08-02 08:22:03 +00:00
Marcel Moolenaar
cfc2754a51 Have the linker script look more like the default linker script
on ia64. This fixes the breakage caused by the gcc upgrade that
resulted in a broken executable.
2003-07-17 00:32:08 +00:00
Ruslan Ermilov
286bce1c85 sys/ia64/ia64/pal.s has been repocopied to pal.S.
Approved by:	marcel
Repocopied by:	joe
2003-07-02 11:53:55 +00:00
Peter Wemm
48a0b96a50 Enable the i386 loader to load and run an amd64 kernel. If this puts
things over floppy size limits, I can exclude it for release builds or
something like that.  Most of the changes are to get the load_elf.c file
into a seperate elf32_ or elf64_ namespace so that you can have two
ELF loaders present at once.  Note that for 64 bit kernels, it actually
starts up the kernel already in 64 bit mode with paging enabled.  This
is really easy because we have a known minimum feature set.

Of note is that for amd64, we have to pass in the bios int 15 0xe821
memory map because once in long mode, you absolutely cannot make VM86
calls.  amd64 does not use 'struct bootinfo' at all.  It is a pure loader
metadata startup, just like sparc64 and powerpc.  Much of the
infrastructure to support this was adapted from sparc64.
2003-05-01 03:56:30 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Marcel Moolenaar
59c9bb54ee Speed up debugging in the context of unexpected traps by printing
the address of the image base of the loader. Given cr.iip, we can
use the symbol table to figure out what function caused the trap.
2003-03-01 05:18:28 +00:00
Marcel Moolenaar
884d549049 Paranoia: Don't use the length of the option string alone to
determine whether we have command line options. We expect a
valid string pointer as well.
2003-03-01 05:13:59 +00:00
Marcel Moolenaar
21c598caae Increase the block size for reading and writing from 8KB to 1MB and
introduce a preprocessor define for it. The larger block size
significantly speeds up the loading of the kernel.

Submitted by: Arun Sharma <arun.sharma@intel.com>
2003-02-26 09:13:05 +00:00
David E. O'Brien
a8896ec82d Consistently use NOFORTH to control the usage of ficl. 2003-02-26 06:18:52 +00:00
Marcel Moolenaar
344c6212b8 Simplify page alignment. 2003-02-20 06:47:54 +00:00
Jake Burkholder
7c6c018c0c Renamed the loader's zipfs to gzipfs. zipfs.c was repo-copied to gzipfs.c. 2002-12-19 19:34:59 +00:00
Marcel Moolenaar
414c998fba Add command `hcdp'. This command dumps the DIG64 HCDP table if one
exists.
2002-12-18 08:13:03 +00:00
Marcel Moolenaar
6257165c74 Pass the HCDP table address to the kernel. If no such table exists,
NULL is passed. The address of the HCDP table can be found by
iterating over the configuration tables in the EFI system table.
To avoid more duplication, a function can be called with the GUID
of interest. The function will do the scanning. Use the function
in all places where we iterate over the configuration tables in
an attempt to find a specific one.

Bump the loader version number as the result of this.

Approved by: re (blanket)
2002-12-10 20:11:20 +00:00
Marcel Moolenaar
11c419e165 The exit() function has been moved to libefi.c to better deal with
cleaning up after ourselves.

Approved by: re (blankoscheck)
German corrections: Alexander (both :-)
2002-12-10 06:27:32 +00:00
Marcel Moolenaar
155dbcacfb Change the startup code to fix a memory leak and to allow us to
accept load options (=command line options).

The call graph changes from *entry*->efi_main->efi_init, where
efi_main is the EFI equivalent of main to *entry*->efi_main->main,
where main is what you'd expect. efi_main now is what efi_init was.
The prototype of main follows that of C. The first argument is argc
and the second is argv. There is no third argument.
Allocation of heap pages is now handled by the EFI library and it
now deallocates the pages when main() returns or when exit() is
called. This allows us to safely return to the boot manager (or
EFI shell) without leaks. EFI applications are responsible to free
all memory themselves.

Handling of the load options is a bit tricky. There are either no
load options, load options in ASCII or load options in Unicode.
The EFI library will translate the ASCII options to Unicode options
as to simplify user code. Since the load options are passed as a
single string (if present) and main() accepts argc and argv, the
startup code also has to split the string into words and build the
argv vector. Here the trickiness starts. When the loader is started
from the EFI shell, argv[0] will automaticly load the program name.
In all other cases (ie through the boot manager), this is not the
case. Unfortunately, there's no trivial way to check. Hence, a
set of conditions is checked to determine if we need to fill in
argv[0] ourselves or not. This checking is not perfect. There are
known cases where it fails to do the right thing. The logic works
for most expected cases, though. This includes the case where no
options are given.

Approved by: re (blanket)
2002-12-10 06:22:25 +00:00
Marcel Moolenaar
4ee2f7cb16 o Make all GUID variables global to maximize reuse.
o  Recognize the HCDP configuration table.
o  Dump the GUID of tables we don't recognize.

Approved by: re (carte blanche)
2002-12-10 04:55:25 +00:00
Marcel Moolenaar
06657fad9b Build EFI with -fshort-wchar so that L"some string" works with the
EFI has defined CHAR16.
2002-12-10 04:20:15 +00:00
Marcel Moolenaar
aa56e74e06 Remove _putchar, _puts and _puthex. These functions are unused.
Approved by: re (blanket)
2002-12-10 04:14:01 +00:00
Marcel Moolenaar
0068037936 Add the GUID of the DIG64 HCDP table. 2002-12-08 20:47:44 +00:00
Marcel Moolenaar
ea16741fc0 The boot manager sets the watchdog timer to 5 minutes before invoking
a boot option. When the timer expires the machine is rebooted.
Disable the watchdog timer for 2 reasons:
o  We're an interactive program. We cannot guarantee that we've
   booted the kernel in the time available to us. There have been
   situations where netbooting the right kernel took 2 tries and
   more time than given. Not to speak of the normal behaviour to
   have the loader sitting at the prompt while the user is off
   doing other things (such as figuring out what to type next ;-)
o  We may not boot a kernel at all. We may exit as the result of
   the user typing quit (assuming it took less than 5 minutes to
   type it :-). It is documented that loaders should have disabled
   the watchdog timer if they return to the boot manager. Not doing
   so would cause a reboot while in the boot manager. This appears
   to be harmless, besides of course the actual reboot.

Approved by: re (weisse karte)
2002-12-08 20:04:00 +00:00
Marcel Moolenaar
487d404b1b In efi_cons_poll we check if a key is present (pending) by checking
the signaled state of the apropriate event. As a side-effect of
checking the event, it's signaled state is cleared if it was set.
In efi_cons_getchar we used to wait for the apropriate event to be
signaled before reading a character. This however does not work if
we poll before reading the characteri, such as during autoboot. On
a more compliant EFI implementation this resulted in the behaviour
that hitting a key during autoboot would stop the countdown, but
would then wait for a new character to arrive instead of reading
the already pending key that stopped the countdown.

The correct behaviour for efi_cons_getchar is to try to read a key
and if none is pending, to wait for the apropriate event to signal
the arrival of a new key.

Note that with the previous behaviour, the second key would determine
how the autoboot was interrupted. This would indicate that the first
key got lost. This indicates that EFI does not necessarily maintain
a queue of pending keys. FWIW...

Approved by: re (carte blanche)
French corrected by: various people :-)
2002-12-08 19:46:11 +00:00
Marcel Moolenaar
aef78848af Remove a left-over virtual mapping of uncached I/O port space.
Previous kernels unwantingly depended on this mapping, but as
of version 1.123 of src/sys/ia64/ia64/machdep.c this dependency
has been removed. Consequently, one has to update the kernel
before updating the loader. The documented/recommended upgrade
will suffice in this case.

Due to a visible (from the kernels point of view) change in
behaviour, bump the loader version number from 0.3 to 1.0.

Approved by: re (carte blanc)
2002-11-28 03:25:51 +00:00
Marcel Moolenaar
689f36d7f9 MFp4:
o  Show the contents of the AP wakeup descriptor when dumping SAL
   information.
o  Increase S/N ratio when listing the itr and dtr. Only show valid
   mappings and give the total number of TRs.

Approved by: re (blanket)
2002-11-24 19:45:05 +00:00
Marcel Moolenaar
0761a64f29 o Fix a size calculation based on a 8KB page, while under EFI
pages are 4KB.
o  As a second order fix, don't assume we have enough space
   after the bootinfo block left in a page to hold the memory
   map.
o  A third order fix as that we removed the assumption that a
   bootinfo block fits in a single 8KB page.

PR: ia64/39415
submitted by: Espen Skoglund <esk@ira.uka.de>
2002-10-24 07:53:12 +00:00
Peter Wemm
789f1dee60 Turn on -Wformat 2002-07-20 03:52:37 +00:00
Peter Wemm
e89db70811 Fix printf format errors 2002-07-20 03:52:18 +00:00
Peter Wemm
914ecdc8ea Work around some nasty bugs on the [beta] Itanium2's E1000 UNDI driver.
Bug#1: The GetStatus() function returns radically different pointers that
do not match any packets we transmitted.  I think it might be pointing to
a copy of the packet or something.  Since we do not transmit more than
one packet at a time, just wait for "anything".

Bug#2: The Receive() function takes a pointer and a length.  However, it
either ignores the length or otherwise does bad things and writes outside
of ptr[0] through ptr[len-1].  This is bad and causes massive stack
corruption for us since we are receiving packets into small buffers on
the stack.  Instead, Receive() into a large enough buffer and bcopy the
data to the requested area.
2002-07-20 03:51:53 +00:00
Peter Wemm
296c758b66 Disable loader ufs support. It causes the loader to crash on the Itanium2
box that I have.  We have no EFI disk drivers yet anyway (maybe that is the
problem).
2002-07-20 03:46:43 +00:00
Peter Wemm
df0e0b8823 Fix printf format errors 2002-07-20 03:44:01 +00:00
Peter Wemm
92caa29d8e Add boot_serial and boot_multicons variables to set RB_SERIAL and
RB_MULTIPLE since this seems to be the easiest way to add these flags
for non-forth loaders etc.
2002-06-20 06:29:42 +00:00
Marcel Moolenaar
23c12a63cf o Remove namespace pollution from param.h:
-  Don't include ia64_cpu.h and cpu.h
   -  Guard definitions by  _NO_NAMESPACE_POLLUTION
   -  Move definition of KERNBASE to vmparam.h

o  Move definitions of IA64_RR_{BASE|MASK} to vmparam.h
o  Move definitions of IA64_PHYS_TO_RR{6|7} to vmparam.h

o  While here, remove some left-over Alpha references.
2002-05-19 04:42:19 +00:00
Marcel Moolenaar
06cb726431 An almost mechanical sweep to replace C++ style comments with C
style comments. This is not an attempt to conform to style(9).
Such has lower priority.
2002-05-19 03:17:22 +00:00
Tom Rhodes
d394511de3 More s/file system/filesystem/g 2002-05-16 21:28:32 +00:00
Ruslan Ermilov
46f8fdc34e Removed now unused INTERNALSTATICLIB.
INTERNALLIB now implies NOPIC and NOPROFILE.
Removed gratuitous NOMAN.
2002-05-13 11:09:07 +00:00
David E. O'Brien
95cfc25d0d Back out last commit. I expect our bsd.*.mk gods to remove the need for
defining so many extra things in addition to INTERNALLIB.  We don't like
repetitive C code and we shouldn't for make code either.
2002-05-12 13:54:42 +00:00
David E. O'Brien
3bf8b9cee3 NOPIC, NOPROFILE, NOMAN, and INTERNALSTATICLIB are redundant when using
INTERNALLIB now.
2002-05-11 18:02:33 +00:00
David E. O'Brien
d1bdfb40fd -ffreestanding is the word.
(also resort some CFLAGS such that the more "important" value are first so
they are easier to see)
2002-05-10 09:26:35 +00:00
Marcel Moolenaar
77de753f65 Improve self-relocation:
o  We don't expect the PLT relocations to follow the .rela section
   anymore. We still assume that PLT relocations are long formed,
o  Document register usage,
o  Improve ILP,
o  Fix the FPTR relocation by creating unique OPDs per function.
   Comparing functions is valid now,
o  The IPLT relocation naturally handles the addend. Deal with it.
   We ignore the addend for FPTR relocations for now. It's not at
   all clear what it means anyway.

Fix ABI misinterpretation:
o  For Elf_Rela relocations, the addend is explicit and should not
   be loaded from the memory address we're relocating. Only do that
   for Elf_Rel relocations (ie the short form).
o  DIR64LSB is not the same as REL64LSB. DIR64LSB applies to a
   symbol (S+A), whereas REL64LSB applies to the base address (BD+A),
2002-04-21 08:49:47 +00:00
Marcel Moolenaar
b226acefc2 Allocate sufficient pages to hold the bootinfo block and stop
hardwiring the location.
2002-04-19 06:43:09 +00:00
Peter Wemm
2ab188f529 Finally fix loader completely for IA64. efifs_stat() wasn't setting
the S_IFREG bit for regular files.  This caused the path search code to
skip it when it finally did find the kernel (after the common/module.c
buffer overrun bug was fixed)
2002-04-11 09:50:11 +00:00
Peter Wemm
c21ab46789 We must not let install(1) strip loader.efi when installing it, or the
resulting binary will be damaged and no longer work.
2002-04-07 04:27:50 +00:00
Peter Wemm
1e7e1ea54d Set BINDIR 2002-04-07 04:26:42 +00:00
Peter Wemm
f3693129ce Add loader bootforth infrastructure and install it. 2002-04-07 04:25:45 +00:00
Peter Wemm
e91ab65ef6 Try and tidy up some very loose ends with paths to various libraries etc. 2002-04-06 04:29:36 +00:00