The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
If the admin creates more CTL ports than kern.cam.ctl.max_ports, then
adding some will fail. If he then removes some ports and does
"service ctld reload", he would expect that the new ports would get
added in the newly-freed port space. But they don't, because ctld
assigned them port numbers during their first creation attempts.
Fix this bug by removing newly created ports from ctld's internal list
if the kernel rejects them for any reason. That way, a subsequent
config reload will attempt to add them again, possibly with new port
numbers.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: jhb, mav
Differential Revision: https://reviews.freebsd.org/D36974
cxgbei needs the ability to return different limits based on the
connection (e.g. if the connection is over a T5 adapter or a T6
adapter as well as factoring in the MTU).
This change plumbs through the changes in the ioctls without changing
any of the backends. The limits callback passed to icl_register now
accepts a second socket argument which holds the integer file
descriptor. To support ABI compatiblity for old binaries, the
callback should return "global" values if the socket fd is zero.
The CTL_ISCSI_LIMITS argument used with CTL_ISCSI by ctld(8) now
accepts the socket fd in a field that was previously part of a
reserved spare field. Old binaries zero this request which results in
passing a socket fd of 0 to the limits callback.
The ISCSIDREQUEST ioctl no longer returns limits. Instead, iscsid(8)
invokes a new ISCSIDLIMITS ioctl after establishing the connection via
connect(2). For ABI compat, if the old ISCSIDREQUEST is invoked, the
global limits are still fetched (with a socket fd of 0) and returned.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34928
Text requests and responses can span multiple PDUs. In that case, the
sender sets the Continue bit in non-final PDUs and the Final bit in
the last PDU. The receiver responds to non-final PDUs with an empty
text PDU.
To support this, add a more abstract API in libiscsi which accepts and
receives key sets rather than PDUs. These routines internally send or
receive one or more PDUs. Use these new functions to replace the
handling of TextRequest and TextResponse PDUs in discovery sessions in
both ctld and iscsid.
Note that there is not currently a use case for large Text requests
and those are still always sent as a single PDU. However, discovery
sessions can return a text response listing targets that spans
multiple PDUs, so the new API supports sending and receiving multi-PDU
responses.
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33548
clang complains about the downcasts from struct connection to struct
ctld_connection as the alignment of struct ctld_connection is higher
on 32-bit platforms. However, the warning is in this case harmless as
the downcasts are on objects originally allocated as instances of
struct ctld_connection with suitable alignment.
Reported by: npn, gjb
Fixes: 6378393308 Add an internal libiscsiutil library.
Sponsored by: Chelsio Communications
This will be used in future changes to support large text requests
spanning multiple PDUs.
Provide wrapper functions keys_load/save_pdu that operate use a PDU's
data buffer.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33547
Move some of the code duplicated between ctld(8) and iscsid(8) into a
libiscsiutil library.
Sharing the low-level PDU code did require having a
'struct connection' base class with a method table to permit separate
initiator vs target behavior (e.g. in handling proxy PDUs).
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D33544
This key is Declarative and should always be sent even if the
initiator did not send it's own limit. This is similar to the fix in
fc79cf4fea but for the target side. However, unlike that fix,
failure to send the key simply results in reduced performance.
PR: 259439
Reviewed by: mav, emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D32651
If the UCL ctld parser encountered a port that used the CTL
ioctl device, it fell into a special case that had an erroneous
early return. This caused all configuration in the target
following the port attribute to be skipped. Fix this by replacing
the return with a continue so that the rest of the config is
parsed correctly.
Sponsored by: Dell EMC Isilon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31703
Reviewed by: bapt
While here only compile both of them if WITH_ISCSI is set (this is the default).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30755
Sponsored by: Diablotin Systems
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
Mak the Ethernet PCP codepoint configurable
for L2 local traffic, to allow lower latency for
iSCSI block IO. This addresses the target
side only.
Reviewed by: mav, trasz, bcr
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26740
Remove quotes around size in the LUN section and change the suffix to 'GB'. The
UCL format does recognize 'G' on its own, which uses a base 10 multiplier where
'GB' uses a 2 power multiplier.
Document the difference between valid suffixes when using ctl.conf(5) in the
general syntax form or in UCL format.
Reviewed by: kevans, mav
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D26716
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
In order to prioritize iSCSI traffic across a network,
DSCP can be used. In order not to rely on "ipfw setdscp"
or in-network reclassification, this adds the dscp value
directly to the portal group (where TCP sessions are accepted).
The incoming iSCSI session is first handled by ctld for any
CHAP authentication and the socket is then handed off to the
in-kernel iscsi driver without modification of the socket
parameters. Simply setting up the socket in ctld is sufficient
to keep sending outgoing iSCSI related traffic with the
configured DSCP value.
Reviewed by: mav, trasz
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26385
from the kernel, but let's try to be on the safe side.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26246
Before switching to nvlists CTL merged previous and new options, so
any options not passed just kept previous value. Now CTL completely
replaces them, so we must pass everything still relevant.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
ioctl frontend ports.
This revision introduces two changes to CTL:
- Changes the way options are passed to CTL_LUN_REQ and CTL_PORT_REQ ioctls.
Removes ctl_be_arg structure and associated logic and replaces it with
nv(3)-based logic for passing in and out arguments.
- Allows creating multiple ioctl frontend ports using either ctladm(8) or
ctld(8).
New frontend ports are represented by /dev/cam/ctl<pp>.<vp> nodes, eg /dev/cam/ctl5.3.
Those device nodes respond only to CTL_IO ioctl.
New command-line options for ctladm:
# creates new ioctl frontend port with using free pp and vp=0
ctladm port -c
# creates new ioctl frontend port with pp=10 and vp=0
ctladm port -c -O pp=10
# creates new ioctl frontend port with pp=11 and vp=12
ctladm port -c -O pp=11 -O vp=12
# removes port with number 4 (it's a "targ_port" number, not pp number)
ctladm port -r -p 4
New syntax for ctl.conf:
target ... {
port ioctl/<pp>
...
}
target ... {
port ioctl/<pp>/<vp>
...
Note: Most of this work was made by jceel@, thank you.
Submitted by: jceel
Reworked by: myself
Reviewed by: mav (earlier versions and recently during the rework)
Obtained from: FreeNAS and TrueOS
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D9299
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
From config synthax point of view such portal groups are not incorrect,
but they are useless since can not receive any connection. And since
CTL port resource is very limited, it is good to save it.
MFC after: 2 weeks
The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use ctl(4) for its other functions.
This allows those without iscsi(4) support built into the kernel to use
ctl(4) as a test mechanism. As a sidenote, this was possible around the
10.0-RELEASE period, but made impossible for end-users without iscsi(4)
between 10.0-RELEASE and 11.0-RELEASE.
Automatically load cfiscsi(4) from ctladm(8) and ctld(8) for backwards
compatibility with previously releases. The automatic loading feature is
compiled into the beforementioned tools if MK_ISCSI == yes when building
world.
Add a manpage for cfiscsi(4) and refer to it in ctl(4).
Differential Revision: D10099
MFC after: 2 months
Relnotes: yes
Reviewed by: mav, trasz
Sponsored by: Dell EMC Isilon
If initiator does not negotiate some parameter, it expects one to get
default value, not some unknown remote hardware limit. On the side side,
if some parameter is negotiated, its default value from RFC should not
be used for anything.