Commit Graph

25 Commits

Author SHA1 Message Date
John Baldwin
e2f76cae05 Trim what we expose to userland in <dev/ppbus/ppbconf.h> to just the
constants used for the ppi(4) ioctls for bits in the control and status
registers.

Reviewed by:	db
2009-02-03 19:49:21 +00:00
John Baldwin
2067d312d4 Add locking to ppc and ppbus and mark the whole lot MPSAFE:
- To avoid having a bunch of locks that end up always getting acquired as
  a group, give each ppc(4) device a mutex which it shares with all the
  child devices including ppbus(4), lpt(4), plip(4), etc.  This mutex
  is then used for all the locking.
- Rework the interrupt handling stuff yet again.  Now ppbus drivers setup
  their interrupt handler during attach and tear it down during detach
  like most other drivers.  ppbus(4) only invokes the interrupt handler
  of the device that currently owns the bus (if any) when an interrupt
  occurs, however.  Also, interrupt handlers in general now accept their
  softc pointers as their argument rather than the device_t.  Another
  feature of the ppbus interrupt handlers is that they are called with
  the parent ppc device's lock already held.  This minimizes the number
  of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
  - Add a mutex to protect the global tables in plip(4) and free them on
    module unload.
  - Add a detach routine.
  - Split out the init/stop code from the ioctl routine into separate
    functions.
- Other lpt(4) changes:
  - Use device_printf().
  - Use a dedicated callout for the lptout timer.
  - Allocate the I/O buffers at attach and detach rather than during
    open and close as this simplifies the locking at the cost of
    1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
  - Use an sx lock to serialize open and close.
  - Remove unused HADBUS flag.
  - Add a detach routine.
  - Use a malloc'd buffer for each read and write to avoid races with
    concurrent read/write.
- Other pps(4) changes:
  - Use a callout rather than a callout handle with timeout().
  - Conform to the new ppbus requirements (regular mutex, non-filter
    interrupt handler).  pps(4) is probably going to have to become a
    standalone driver that doesn't use ppbus(4) to satisfy it's
    requirements for low latency as a result.
  - Use an sx lock to serialize open and close.
- Other vpo(4) changes:
  - Use the parent ppc device's lock to create the CAM sim instead of
    Giant.
- Other ppc(4) changes:
  - Fix ppc_isa's detach method to detach instead of calling attach.

Tested by:	  no one :-(
2009-01-21 23:10:06 +00:00
John Baldwin
284c87f60e Various whitespace and style fixes. 2008-11-16 17:42:02 +00:00
John Baldwin
ae6b868a2a Several cleanups to remove the need for explicit unit numbers and a few
other fixes:
- Add pointers back to device_t objects in softc structures instead
  of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
  instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
  pulling the unit number from the minor number and using
  devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
  number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
  ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
  from the parent anyway.
- Try to detach all the child devices before deleting them in
  ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
  ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
  numbers.

Silence on:	current@
2008-10-21 18:30:10 +00:00
John Baldwin
ca3d37955c Rework the handling of interrupt handlers for children of ppc and ppbus:
- Retire IVARs for passing IRQs around.  Instead, ppbus and ppc now allow
  child devices to access the interrupt by via a rid 0 IRQ resource
  using bus_alloc_resource_any().
- ppc creates its own interrupt event to manage the interrupt handlers of
  child devices.  ppc does not allow child devices to use filters.  It
  could allow this if needed, but none of the current drivers use them
  and it adds a good bit of complication.  It uses
  intr_event_execute_handlers() to fire the child device interrupt handlers
  from its threaded interrupt handler.
- Remove the ppbus_dummy_intr() hack.  Now the ppc device always has an
  interrupt handler registered and we no longer bounce all the way up to
  nexus to manage adding/removing ppbus child interrupt handlers.  Instead,
  the child handlers are added and removed to the private interrupt event
  in the ppc device.
2008-09-15 22:26:32 +00:00
John Baldwin
618f2b4d55 Work around problems with the ppbus(4)'s interesting way of managing
interrupt handlers for child devices by adding a dummy handler that is
always present so that the underlying interrupt thread is always around
avoiding panics from stray interrupts.

MFC after:	3 days
2008-01-10 23:43:47 +00:00
John Baldwin
8b149b5131 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
Nick Hibma
7fe1aaca86 make the example compile again.
The makefile contains a reference to /sys/dev/ppbus. What really should
be done is copy the header files to /usr/include/sys/dev/ppbus.

PR:	            kern/16767
Submitted by:	   Jin Guojun (FTG staff) <jin@gracie.lbl.gov>
2000-04-27 21:08:24 +00:00
Nicolas Souchu
0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
fca3f34ff8 Passing the unit number to an interrupt routing is kind of narrowminded,
add a way to get the entire struct ppb_device back.
1999-08-08 22:25:21 +00:00
Peter Wemm
5734634f4c Make ppbus compile under egcs. I'm not sure about this casting-to-union-
-containing-the-type stuff, but gcc seemed to do it implicitly..
1999-04-05 15:43:11 +00:00
Nicolas Souchu
20240fa3ad Distinguish EPP address/data register. Add EPP address register access to ppi.
Change microseq offsets. Previously, offsets of the program counter where
added to the index of the current microinstruction. Make them rely on the
index of the next executed microinstruction.

Suggested by: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
1999-01-30 15:35:39 +00:00
Matthew Dillon
a56d629240 Fix PPBPRI #define - it was missing parenthesis which messed up a
call to tsleep() in dev/ppbus/ppbconf.c.  Also fixup initializers.
1999-01-27 19:44:05 +00:00
Nicolas Souchu
a7006f894f Fix broken low level ppb_rxxx() return type: char becomes u_char.
Submitted by: Bruce Evans <bde@zeta.org.au>

Some ppb bootup printfs simplified.
1999-01-10 16:41:14 +00:00
Nicolas Souchu
bc35c17446 Major ppbus commit with:
+ ECP parallel port chipset FIFO detection
	+ DMA+FIFO parallel I/O handled as chipset specific
	+ nlpt updated in order to use the above enhanced parallel I/O.
	  Use 'lptcontrol -e' to use enhanced I/O
	+ Various options documented in LINT
	+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
	  an overview of the IEEE1284 standard
	+ Detection of PnP parallel devices at boot
	+ Read capability added to nlpt driver to get IEEE1284 compliant
	  printer status with a simple 'cat /dev/lpt0'
	+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
	  may dialog according to IEEE1284 signaling method.
	  See PERIPH_1284 option and /sys/dev/ppbus/ppi.c

All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Nicolas Souchu
71705a23fc - port of vpo code to CAM
- ppbus was released before checking if still in disk_mode by vpoio and immio:
  the microseq (in_disk_mode) was never executed. Fixed.

- nlptintr() renamed to nlpt_intr(). spltty() inserted in nlptintr() before
  nlpt_intr() call
1998-09-20 14:41:54 +00:00
Nicolas Souchu
24ef1eb143 ppbus enhanced to support ZIP+ : 1284 code added, microseq improved +
some bugs corrected in vpoio.
1998-09-13 18:26:26 +00:00
Mike Smith
46f3ff7986 Major ppbus updates from the author.
- ppbus now supports PLIP via the if_plip driver
 - ieee1284 infrastructure added, including parallel-port PnP
 - port microsequencer added, for scripting the sort of port I/O
   that is common with parallel devices without endless calls up and down
   through the driver structure.
 - improved bus ownership behaviour among the ppbus-using drivers.
 - improved I/O chipset feature detection

The vpo driver is now implemented using the microsequencer, leading to
some performance improvements as well as providing an extensive example
of its use.

Reviewed by:	msmith
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00
Poul-Henning Kamp
8afeddf0a8 This is a prototype implementation of the draft-mogul-pps-api-##.txt
paper.

It will be updated along with the draft and possible subsequent
standard.

The ppbus based pps driver is updated to implement this API.
1998-06-07 19:44:22 +00:00
Bruce Evans
51f480df7a Oops, the previous change applied a reversed patch. 1997-09-01 18:39:37 +00:00
Bruce Evans
0ff12406c3 Removed unused #includes. The !KERNEL case may be more broken than before. 1997-09-01 00:51:52 +00:00
Bruce Evans
e3ffd60e0a Added #include of <sys/queue.h> to make this self-sufficient.
Includers of this file apparently didn't know that <sys/queue.h>
was a prerequisite and include a semi-random collection headers
until one happened to include it.
1997-09-01 00:18:02 +00:00
Mike Smith
e51b0386a6 Sync with ppbus-970815 from the author :
- interrupt-driven printing now works (nlpt)
 - Rearrangement of bus-related functions into ppb_base/ppbconf
 - Addition of ieee1284 interface functions, preliminary parallel-port
   PnP support

Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00
Mike Smith
ed3815224c New directory and drivers for Parallel Port Bus devices.
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-14 13:57:45 +00:00