Commit Graph

71 Commits

Author SHA1 Message Date
Attilio Rao
ff0991c4e9 Sync with the official Adaptec vendor driver:
[1]	Add the support for the NARK controller which seems a variant of
	the i960Rx.
[2]	Split up memory regions and other resources in 2 different parts
	as long as NARK uses them separately (it is not clear to me
	why though as long as there are no more informations available
	on this controller). Please note that in all the other cases,
	the regions overlaps leaving the default behaviour for all the
	other controllers.
[3]	Implement a clock daemon responsible for maintain updated the
	wall clock time of the controller (run any 30 minutes)*.

Submitted by:	Adaptec (driver build 15317 [1, 2] and 15727 [3])
Reviewed by:	emaste
Tested by:	emaste
Sponsored by:	Sandvine Incorporated

* Please note that originally, in the Adaptec driver, the clock daemon
  is not implemented with callouts as in our in-tree driver.
2009-02-21 15:40:03 +00:00
Ed Maste
241804a5c8 Remove duplicate 2610SA entry.
Submitted by:	jkim
2008-11-27 20:26:02 +00:00
Ed Maste
c7e44c9ac1 Whitespace cleanup. 2008-09-12 18:15:12 +00:00
Ed Maste
1f56858361 Add explicit PCI IDs for the following Adaptec RAID Series 2 adapters:
Adaptec RAID 2045
  Adaptec RAID 2405
  Adaptec RAID 2445
  Adaptec RAID 2805

Without this change these devices are supported by the driver's family
support, but they then appear as "Adaptec RAID Controller" in boot
messages and the dev.aac.0.%desc sysctl.
2008-06-27 19:34:47 +00:00
Ed Maste
31a0399e57 Diff reduction to Adaptec's driver (around build 15317): catch up with a
change in debugging routines.

The fwprintf macro in the AAC_DEBUG case (mapping to printf) isn't from the
Adaptec driver.
2008-03-24 19:23:33 +00:00
Ed Maste
7ea2d5586c Add family support to allow the driver to attach to new devices that
share the same interface.

Submitted by:	Achim Leubner at Adaptec
2007-12-07 18:05:41 +00:00
Ed Maste
8af086fd5c Add more PCI ID's from Adaptec's driver, including two requested
by Daniel Kamm.

  Adaptec RAID 51245
  Adaptec RAID 51645
  Adaptec RAID 52445
  Adaptec RAID 5405
  Sun STK RAID REM
  Sun STK RAID EM
  SG-XPCIESAS-R-IN
  SG-XPCIESAS-R-EX
2007-12-06 18:25:29 +00:00
Ed Maste
e9faf6c240 Add PCI IDs for additional cards:
AOC-USAS-S4i
AOC-USAS-S8i
AOC-USAS-S4iR
AOC-USAS-S8iR
AOC-USAS-S8i-LP
AOC-USAS-S8iR-LP
2007-12-06 02:10:07 +00:00
Ed Maste
2792e50946 Add PCI IDs from Adaptec's driver version b11669:
Adaptec RAID 3085
Adaptec RAID 31205
Adaptec RAID 31605
Adaptec RAID 5085
Adaptec RAID 51205
Adaptec RAID 51605
Adaptec RAID 5445
Adaptec RAID 5805
IBM ServeRAID 8s
ICP RAID ICP5045BL
ICP RAID ICP5085BL
ICP RAID ICP5085SL
ICP RAID ICP5125BR
ICP RAID ICP5125SL
ICP RAID ICP5165BR
ICP RAID ICP5165SL
ICP RAID ICP5445SL
ICP RAID ICP5805BL
ICP RAID ICP5805SL
ICP9067MA SATA RAID
2007-10-14 19:40:15 +00:00
Ed Maste
afa3f6df27 Add PCI IDs for two cards:
- Adaptec RAID 3405
- Adaptec RAID 3805

Approved by:	re (bmah)
Submitted by:	John Marra  jmarra at nmu dot edu
MFC After:	1 week
2007-08-23 20:12:40 +00:00
Matt Jacob
b3d93fd0c9 Add MODULE_DEPENDS for cam, pci, mca, eisa and isa where needed.
PR:		106543
MFC after:	3 days
2006-12-11 18:28:31 +00:00
Scott Long
eae94b6727 Add PCI Id for ServeRAID 8k.
Submitted by: Danny Braniss
2006-11-03 04:57:23 +00:00
Christian Brueffer
7598d04984 Correct the names or some Adaptec and ICP devices, verified by the
respective websites.

Reviewed by:	scottl
Approved by:	rwatson (mentor)
MFC after:	5 days
2006-06-17 18:42:26 +00:00
Scott Long
2419217b8d Refactor the PCI probe code a bit. 2005-11-06 22:52:52 +00:00
Scott Long
7cb209f5d0 Mega Update to the aac driver to support a whole new family of cards and
the modified interface that they use.  Changes include:

- Register a different interrupt handler for the new interface.  This one is
  INTR_MPSAFE, not INTR_FAST, and directly processes completions and AIFs.
- Add an event registration and callback mechanism for the ioctl and CAM
  modules can know when a resource shortage clears.  This condition was
  previously fatal in CAM due to programming oversights.
- Fix locking to play better with newbus.
- Provide access methods for talking to cards with the NEWCOMM interface.
- Fix up the CAM module to be better suited for dealing with newer firmware
  on the PERC Si/Di series that requires talking to plain SCSI via aac.
- Add a whole slew of new PCI Id's.

Thanks to Adaptec for providing an initial version of this work and for
answering countless questions about it.  There are still some rough edges in
this, but it works well enough to commit and test for now.

Obtained from: Adaptec, Inc.
2005-10-08 15:55:09 +00:00
Paul Saab
16ee26fd9b Add support for HP branded 2610SA
MFC after:	3 days
Approved by:	scottl
2005-08-08 19:39:58 +00:00
Scott Long
1b3a4f4e7b Check the vendor and device, not subvendor and subdevice, when looking for
channel devices.  This should fix Dell 2450/2550/2650 systems that have RAID
enabled.  This will likely not fix 2400 systems though as I don't have the
appropriate PCI Id info for them.

MFC After: 3 day
2005-07-14 17:43:00 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Warner Losh
494f3ca182 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 19:24:22 +00:00
Scott Long
608d7ac260 Add a default driver to attach to the "hidden" scsi channels of the Dell
PERC 3 controllers.  This is needed to keep the PM code from powering them
down.
2005-01-07 05:59:45 +00:00
Scott Long
ecefe5717e Add the PCI ID for the Adaptec 2230SLP card.
Submitted by: Ray Gilstrap
2004-12-15 07:03:21 +00:00
Scott Long
0b0594cd4f Complete the repo-copy of aac_ioctl.h from sys/dev/aac/to sys/sys. 2004-12-09 22:20:25 +00:00
Scott Long
b1e56e58c5 Add support for the 21610SA 16-channel SATA card. Thanks to Adaptec for
providing hardware for testing.
2004-10-21 19:14:32 +00:00
Scott Long
4afedc314e Add support for the Adaptec RAID-On-Chip architecture. This in turn
provides support for the Adaptec 2130S adapter.  Thanks to Adaptec for
providing hardware for this.
2004-08-13 01:44:09 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Dag-Erling Smørgrav
7cec30e791 Unbreak the build. 2004-05-13 19:15:21 +00:00
Scott Long
d7f2f66e08 Enable INTR_ENTROPY if the interrupt is not set to INTR_FAST. Remove the
testing and setting of the INTR_ENTROPY macro as it is not needed in
FreeBSD 5.x.

Submitted by:	Alex Vasylenko
2004-05-13 16:02:18 +00:00
Scott Long
ad452e6553 Don peril-sensitive sunglasses and add PCI Id's for two new cards. I've
only done minimal testing on one of these cards and the firmware folks
have been extremely uncooperative in answering my qeustions about them, so
hopefully they will work ok for everyone.
2004-03-20 21:07:36 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Scott Long
f893fdd54e Fall back to INTR_MPSAFE if INTR_FAST registration fails.
PR:	kern/62276
2004-02-09 05:29:05 +00:00
Scott Long
9148fa21dd Take the plunge and make this driver be INTR_FAST. This re-arranges the
interrupt handler so that no locks are needed, and schedules the
command completion routine with a taskqueue_fast.  This also corrects the
locking in the command thread and removes the need for operation flags.

Simple load tests show that this is now considerably faster than FreeBSD 4.x
in the SMP case when multiple i/o tasks are running.
2004-01-30 07:04:39 +00:00
Scott Long
f29f42fce7 Remove a bogus PCI ID entry. 2003-11-01 00:13:43 +00:00
Scott Long
5b80c0d74d Use PCIR_BAR() instead of a magic offset. 2003-09-09 06:44:58 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
dc5f7dd01b Prefer the new location of dev/pci/pci*.h. 2003-08-22 05:09:35 +00:00
Scott Long
4b00f859d0 Add a new quirk for cards that incorrectly interpret the amount of memory
in the system.  This might also have a small performance gain.
2003-07-09 19:19:16 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Scott Long
9d5be300d3 Add support for the upcoming 2410SA card.
Approved by:	re (telecon)
2003-05-30 09:22:19 +00:00
Scott Long
a6d35632f5 Begin support for 64-bit address support and workarounds for newer cards:
- Add data structuress for doing 64-bit scatter/gather
	- Move busdma tag creations around so that only the parent is
	  created in aac_pci.c.
	- Retrieve the capabilities word from the firmware before setting
	  up command structures and tags. This allows the driver to decide
	  whether to do 64-bit commands, and if work-arounds are needed for
	  systems with >2GB of RAM.
	- Only enable the SCSI passthrough if it's enabled in the capabilities
	  word in the firmware.

This should fix problems with the 2120S and 2200S cards in systems with more
than 2GB of RAM.  Full 64-bit support is forthcoming.

MFC-After:	1 week
2003-03-26 17:50:11 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Scott Long
9e2e96d803 The aac driver has evolved enough over the last few months that it no
longer resembles the 4.x version very much.  Garbage collect the legacy
bits.
2003-03-01 05:07:19 +00:00
Scott Long
13f9c3024f Use BUS_SPACE_MAXADDR_32BIT in the DMA tag where needed. Before the recent
fix to BUS_SPACE_MAXADDR, we were probably bouncing quite a bit =-(
2003-02-26 02:55:58 +00:00
Scott Long
9c3a7fce37 Make the aac driver be INTR_MPSAFE. Once the interrupt handler determines
that a command completion happened, all further processing is deferred to
a taskqueue.  The taskqueue itself runs implicetely under Giant, but we
already used a taskqueue for the biodone() processing, so this at least
saves the contesting of Giant in the interrupt handler.
2003-02-19 21:58:34 +00:00
Scott Long
ffb37f33f8 Implement a new dynamic command allocator. FIBs are allocated in 1 page
blocks now, which should eliminate problems with the driver failing to
attach due to insufficient contiguous RAM.  Allow the FIB pool to grow
from the default of 128 to the max of 512 as demand grows.  Also pad the
adapter init struct to work around the 2120/2200 DMA bug now that there
is no longer a FIB slab.
2003-02-10 00:34:24 +00:00
Scott Long
128aa5a022 Hack around a bug in the 2200 and 2120 controllers that connot DMA
commands from below the first 8K of physical memory.  A better fix
is to modify the busdma api to allow either inclusion ranges or
multiple exclusion ranges, but that debate is for another day.

MFC After:	2 days
2003-01-23 01:01:44 +00:00
Scott Long
a9f3d2c756 sable the CAM interface on some more cards. It seemed to be confusing and
upsetting the firmware there.

Thanks to imp@freebsd.org for suffering through testing with this.

Approved by:	re
2002-12-12 22:23:06 +00:00
Scott Long
2f4bfb29bb Fix GET_TRAN_SETTINGS to be more correct.
Don't allow SCSI resets on the 5400S card, it seems to cause problems with
certain backplanes.

Submitted by:	lnb@freebsdsystems.com
MFC after:	3 days
2002-08-10 19:55:00 +00:00
Scott Long
c52bf372f5 Update the PCI table as per Dell's fickleness.
MFC after:	3 days
2002-05-12 04:30:28 +00:00
Scott Long
fe3cb0e1ec Add a CAM interface to the aac driver. This is useful in case you should
ever connect a SCSI Cdrom/Tape/Jukebox/Scanner/Printer/kitty-litter-scooper
to your high-end RAID controller.  The interface to the arrays is still
via the block interface; this merely provides a way to circumvent the
RAID functionality and access the SCSI buses directly.  Note that for
somewhat obvious reasons, hard drives are not exposed to the da driver
through this interface, though you can still talk to them via the pass
driver.  Be the first on your block to low-level format unsuspecting
drives that are part of an array!

To enable this, add the 'aacp' device to your kernel config.

MFC after:	3 days
2002-04-27 01:31:17 +00:00
Scott Long
cbfd045b10 Prepare for a major update to the aac driver:
Update the aac driver with the new crashdump api.
	Protect sync fibs with a mutex.
	Align all DMA buffers on a PAGE_SIZE boundary.

MFC after:	3 days
2002-04-24 05:12:50 +00:00