Commit Graph

685 Commits

Author SHA1 Message Date
John Baldwin
b2e60773c6 Add kernel-side support for in-kernel TLS.
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets.  KTLS only supports
offload of TLS for transmitted data.  Key negotation must still be
performed in userland.  Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option.  All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.

Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type.  Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.

At present, rekeying is not supported though the in-kernel framework
should support rekeying.

KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer.  Each TLS frame is described by a single
ext_pgs mbuf.  The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.

KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.

Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame().  ktls_enqueue() is then
called to schedule TLS frames for encryption.  In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed.  For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().

A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue().  Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.

(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)

KTLS supports pluggable software encryption backends.  Internally,
Netflix uses proprietary pure-software backends.  This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames.  As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.

Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready().  At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.

ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation.  In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session.  TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted.  The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface.  If so, the packet is tagged
with the TLS send tag and sent to the interface.  The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation.  If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped.  In addition, a task is scheduled to refresh the TLS send
tag for the TLS session.  If a new TLS send tag cannot be allocated,
the connection is dropped.  If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag.  (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another.  As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)

ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8).  ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.

Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option.  They can also use this socket
option to toggle between software and ifnet TLS modes.

In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax.  However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.

Various sysctls and counters are available under the kern.ipc.tls
sysctl node.  The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default).  The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.

KTLS is enabled via the KERN_TLS kernel option.

This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.

Reviewed by:	gallatin, hselasky, rrs
Obtained from:	Netflix
Sponsored by:	Netflix, Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D21277
2019-08-27 00:01:56 +00:00
Eric Joyner
f4aa9b67eb net: Update SFF-8024 definitions and strings with values from rev 4.6
This will let ifconfig -v's SFF eeprom read functionality recognize more
module types.

Signed-off-by: Eric Joyner <erj@freebsd.org>

Reviewed by:	gallatin@
MFC after:	1 week
Sponsored by:	Intel Corporation
Differential Revision:	https://reviews.freebsd.org/D21041
2019-08-17 00:10:56 +00:00
John-Mark Gurney
a521fa63c2 finish the pcp feature, but documenting it in the man page... 2019-08-15 16:58:00 +00:00
Warner Losh
51d357cbb3 Remove RELEASE_CRUNCH
RELEASE_CRUNCH isn't used for releases any more. If someone wants to subset,
then they can set MK_JAIL=no instead.
2019-07-19 20:04:13 +00:00
John Baldwin
82334850ea Add an external mbuf buffer type that holds multiple unmapped pages.
Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages.  It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.

For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer.  This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers).  It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused.  To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.

Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.

NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability.  This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands.  For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.

If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output.  If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.

Submitted by:	gallatin (earlier version)
Reviewed by:	gallatin, hselasky, rrs
Discussed with:	ae, kp (firewalls)
Relnotes:	yes
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D20616
2019-06-29 00:48:33 +00:00
Brooks Davis
ffda67901e Change ed(4), ep(4), and fxp(4) examples to em(4).
ed(4) and ep(4) have been removed. fxp(4) remains popular in older
systems, but isn't as future proof as em(4).

Reviewed by:	bz, jhb
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D20311
2019-05-18 21:01:36 +00:00
Kyle Evans
6a68e95de8 ifconfig(8): Add kld mappings for ipsec/enc
Additionally, providing mappings makes the comparison for already loaded
modules a little more strict. This should have been done at initial
introduction, but there was no real reason- however, it proves necessary for
enc which has a standard enc -> if_enc mapping but there also exists an
'enc' module that's actually CAM. The mapping lets us unambiguously
determine the correct module.

Discussed with:	ae
MFC after:	4 days
2019-05-10 13:18:22 +00:00
Kyle Evans
56f76a10c6 ifconfig(8): Partial revert of r347241
r347241 introduced an ifname <-> kld mapping table, mostly so tun/tap/vmnet
can autoload the correct module on use. It also inadvertently made bogus
some previously valid uses of sizeof().

Revert back to ifkind on the stack for simplicity sake. This reduces the
diff from the previous version of ifmaybeload for easiser auditing.
2019-05-09 12:58:33 +00:00
Kyle Evans
251a32b5b2 tun/tap: merge and rename to tuntap
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).

This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp

[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).

ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.

(MFC commentary)

This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.

I have no plans to do this MFC as of now.

Reviewed by:	bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from:	melifaro
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
Andrew Gallatin
35961dce98 Select lacp egress ports based on NUMA domain
This change creates an array of port maps indexed by numa domain
for lacp port selection. If we have lacp interfaces in more than
one domain, then we select the egress port by indexing into the
numa port maps and picking a port on the appropriate numa domain.

This is behavior is controlled by the new ifconfig use_numa flag
and net.link.lagg.use_numa sysctl/tunable (both modeled after the
existing use_flowid), which default to enabled.

Reviewed by:	bz, hselasky, markj (and scottl, earlier version)
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D20060
2019-05-03 14:43:21 +00:00
Andrey V. Elsukov
aee793eec9 Add GRE-in-UDP encapsulation support as defined in RFC8086.
This GRE-in-UDP encapsulation allows the UDP source port field to be
used as an entropy field for load-balancing of GRE traffic in transit
networks. Also most of multiqueue network cards are able distribute
incoming UDP datagrams to different NIC queues, while very little are
able do this for GRE packets.

When an administrator enables UDP encapsulation with command
`ifconfig gre0 udpencap`, the driver creates kernel socket, that binds
to tunnel source address and after udp_set_kernel_tunneling() starts
receiving of all UDP packets destined to 4754 port. Each kernel socket
maintains list of tunnels with different destination addresses. Thus
when several tunnels use the same source address, they all handled by
single socket.  The IP[V6]_BINDANY socket option is used to be able bind
socket to source address even if it is not yet available in the system.
This may happen on system boot, when gre(4) interface is created before
source address become available. The encapsulation and sending of packets
is done directly from gre(4) into ip[6]_output() without using sockets.

Reviewed by:	eugen
MFC after:	1 month
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D19921
2019-04-24 09:05:45 +00:00
Bjoern A. Zeeb
21231a7aa6 Update for IETF draft-ietf-6man-ipv6only-flag.
All changes are hidden behind the EXPERIMENTAL option and are not compiled
in by default.

Add ND6_IFF_IPV6_ONLY_MANUAL to be able to set the interface into no-IPv4-mode
manually without router advertisement options.  This will allow developers to
test software for the appropriate behaviour even on dual-stack networks or
IPv6-Only networks without the option being set in RA messages.
Update ifconfig to allow setting and displaying the flag.

Update the checks for the filters to check for either the automatic or the manual
flag to be set.  Add REVARP to the list of filtered IPv4-related protocols and add
an input filter similar to the output filter.

Add a check, when receiving the IPv6-Only RA flag to see if the receiving
interface has any IPv4 configured.  If it does, ignore the IPv6-Only flag.

Add a per-VNET global sysctl, which is on by default, to not process the automatic
RA IPv6-Only flag.  This way an administrator (if this is compiled in) has control
over the behaviour in case the node still relies on IPv4.
2019-03-06 23:31:42 +00:00
Andriy Voskoboinyk
38979c4b45 Allow to build ifconfig(8) without wireless support
The change removes SIOC[GS]IEEE80211 handling from ifconfig(8)
if WITHOUT_WIRELESS_SUPPORT=yes is set in src.conf(5).

Reviewed by:	bz
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D19289
2019-03-04 03:47:06 +00:00
Alan Somers
d309dcbcd3 ifconfig: eliminate trailing whitespace
Eliminate trailing whitespace on inet, inet6, and groups lines. I think the
"list txpower" command will still show some, but I'm not able to test that.

PR: 153731
Reported-by: Nikolay Denev <ndenev@gmail.com>
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D19004
2019-02-26 03:34:47 +00:00
Andriy Voskoboinyk
2a0f9d5416 ifconfig(8): display 802.11n rates correctly for 'roam:rate' parameter
MFC after:	5 days
2019-02-10 21:32:39 +00:00
Andriy Voskoboinyk
b90dad3524 ifconfig(8): actually, non-11n rates should be divided by 2...
MFC after:	1 week
MFC with:	343698
2019-02-03 04:41:00 +00:00
Andriy Voskoboinyk
35a5128d50 ifconfig(8): display management / multicast wlan(4) rates properly
For 11n / 11ac we are still using non-11n rates for management and
multicast traffic by default; check 'MCS rate' bit to determine how
to print them correctly.

PR:		161035
MFC after:	1 week
2019-02-03 03:02:59 +00:00
Andriy Voskoboinyk
22cde055c2 ifconfig(8): interpret VHT rates correctly for 'list roam / txparam' options
They are represented via MCS rate index, not as a 'speed in MBps' * 2.

MFC after:	5 days
2019-02-03 00:18:29 +00:00
Patrick Kelsey
80e72d5216 Speed up non-status operations applied to a single interface
When performing a non-status operation on a single interface, it is
not necessary for ifconfig to build a list of all addresses in the
system, sort them, then iterate through them looking for the entry for
the single interface of interest. Doing so becomes increasingly
expensive as the number of interfaces in the system grows (e.g., in a
system with 1000+ vlan(4) interfaces).

Reviewed by:	ae, kp
MFC after:	1 week
Sponsored by:	RG Nets
Differential Revision:	https://reviews.freebsd.org/D18919
2019-01-28 20:30:04 +00:00
Alan Somers
fbf997c5eb ifconfig: fix endianness bug displaying pfsync interfaces
Reviewed by:	kp
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D19005
2019-01-28 18:34:04 +00:00
Andriy Voskoboinyk
938ed5dad6 ifconfig: drop unused macros from ifieee80211.c
MFC after:	5 days
2019-01-23 13:07:05 +00:00
Oleksandr Tymoshenko
f280f93df7 [ifconfig] Print more WPS attributes in verbose "list scan" output
- Move WPS related defines to dedicated file
- Add handlers for more WPS attributes

PR:		217317
Submitted by:	J.R. Oldroyd <fbsd@opal.com>
MFC after:	3 weeks
2019-01-20 00:45:44 +00:00
Eugene Grosbein
8ebaf58450 ifconfig.4, lagg.4: fix documentation bug: -use_flowid needs to be used
to force local hash computation and disable usage of RSS hash
provided by driver.

PR:		234242
MFC after:	1 week
2018-12-22 11:38:54 +00:00
Bjoern A. Zeeb
201100c58b Initial implementation of draft-ietf-6man-ipv6only-flag.
This change defines the RA "6" (IPv6-Only) flag which routers
may advertise, kernel logic to check if all routers on a link
have the flag set and accordingly update a per-interface flag.

If all routers agree that it is an IPv6-only link, ether_output_frame(),
based on the interface flag, will filter out all ETHERTYPE_IP/ARP
frames, drop them, and return EAFNOSUPPORT to upper layers.

The change also updates ndp to show the "6" flag, ifconfig to
display the IPV6_ONLY nd6 flag if set, and rtadvd to allow
announcing the flag.

Further changes to tcpdump (contrib code) are availble and will
be upstreamed.

Tested the code (slightly earlier version) with 2 FreeBSD
IPv6 routers, a FreeBSD laptop on ethernet as well as wifi,
and with Win10 and OSX clients (which did not fall over with
the "6" flag set but not understood).

We may also want to (a) implement and RX filter, and (b) over
time enahnce user space to, say, stop dhclient from running
when the interface flag is set.  Also we might want to start
IPv6 before IPv4 in the future.

All the code is hidden under the EXPERIMENTAL option and not
compiled by default as the draft is a work-in-progress and
we cannot rely on the fact that IANA will assign the bits
as requested by the draft and hence they may change.

Dear 6man, you have running code.

Discussed with:	Bob Hinden, Brian E Carpenter
2018-10-30 20:08:48 +00:00
Andrey V. Elsukov
edcc075398 Fix grammar.
Reported by:	yuripv
MFC after:	3 weeks
2018-10-21 14:48:40 +00:00
Andrey V. Elsukov
5c88595e07 Do not allow use create keyword as hostname when ifconfig(8) is invoked
for already existing interface.

It appeared, that ifconfig(8) assumes `create` keyword as hostname and
tries to resolve it, when `ifconfig ifname create` invoked for already
existing interface. This can produce some unexpected results, when hostname
resolving has successfully happened. This patch adds check for such case.
When an interface is already exists, and create is only one argument,
return error message. But when there are some other arguments, just remove
create keyword from the arguments list.

Obtained from:	Yandex LLC
MFC after:	3 weeks
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D17171
2018-10-21 14:40:45 +00:00
Andrey V. Elsukov
068273571b Update ifr_name before invoking IPSECSREQID ioctl, this fixes the case,
when `ifconfig ipsec create reqid N` command invoked without interface
unit number. The "name" global variable is updated after interface
cloning in the ifclonecreate() and contains actual interface name.

Reported by:	lev
Approved by:	re (kib)
MFC after:	1 week
2018-09-22 16:30:48 +00:00
Sevan Janiyan
1284f5f4a1 IEEE!
Pointy hat: 	myself
2018-08-11 11:05:22 +00:00
Sevan Janiyan
f3897785f0 Drop the ternary operator for calculating ssid display length in list_scan().
Regardless if a verbose scan is required or not, we'd still want to display the
full SSID name by default so use the IEE80211_NWID_LEN constant to set the
value to use instead.

Tested on rene@'s laptop.
Reviewed by:	kp
Sponsored by:	Essen Hackathon
Differential Revision:	https://reviews.freebsd.org/D16566
2018-08-11 10:21:21 +00:00
Mark Johnston
38225654b8 ifconfig: Fix use of _Noreturn.
The _Noreturn is a function-specifier (like inline) which must preceed
the declarator.

Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after:	1 week
2018-08-07 17:25:38 +00:00
Kyle Evans
af74661403 ifconfig(8): Attempt to render non-printable sequences w/ UTF-8 Environment
Currently ifconfig(8) only prints the hex representation of ssid names
with non-ASCII characters. Many modern terminals are able to properly render
non-ASCII characters. This change checks if the terminal charmap is UTF-8,
and if so, will render the characters, rather than the hex value.

This behavior is circumvented by running ifconfig(8) in a non-UTF8 locale;
e.g. C or POSIX.

It was pointed out by kp@ during the review that APs have the option to
broadcast whether their SSIDs may be interpreted as UTF-8. Ideally, we would
honor this and only attempt this behavior if it's so-broadcasted by the AP.

However, a sample survey showed that hostapd will advertise this if
indicated in config but it doesn't seem to be so common in the AP market, so
this would be effectively useless as we'll rarely know if the SSID should be
renderable as UTF-8.

Despite this, it was decided to be OK with this anyways- there's a
straightforward path to doing it the right way based on advertisement by AP
if we need to go that route, and one can revert to old behavior easily
enough at runtime if we get it wrong.

Submitted by:	Farhan Khan <khanzf@gmail.com>
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D15922
2018-06-28 03:37:15 +00:00
Edward Tomasz Napierala
a6c0b9d085 Fix description for the "autoconf" ifconfig(8) flag; it's an address
property, not something you set for an interface.

MFC after:	2 weeks
2018-06-27 19:28:37 +00:00
Andrey V. Elsukov
7a07dfbc7c Make the name of option that toggles IFCAP_HWRXTSTMP capability to
match the name of this capability. It was added recently and is not merged
to stable branch, so I hope it is not too late to change the name.

Reviewed by:	kib
Differential Revision:	https://reviews.freebsd.org/D15475
2018-05-18 12:12:24 +00:00
Brooks Davis
4204224162 Finish removing FDDI and tokenring media support.
This fixes media display for 802.11 wireless devices.

Software outside the base system that uses these media types and
defines should use #ifdef IFM_FDDI or IFM_TOKEN to include or remove
support.

Reported by:	zeising
Reviewed by:	emaste, kib, zeising
Tested by:	zeising
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15170
2018-04-23 21:10:33 +00:00
Andrew Gallatin
47528c67ef Make lagg creation more fault tolerant
- Warn, don't exit, when SIOCSLAGGPORT returns an error.

When we exit with an error during lagg creation, a single
failed NIC (which no longer attaches) can prevent lagg
creation and other configuration, such as adding an IPv4
address, and thus leave a machine unreachable.

- Preserve non-EEXISTS errors for exit status from SIOCSLAGGPORT,
  in case scripts are looking for it. Hopefully this can be
  extended if other parts of ifconfig can allow a "soft" failure.

- Improve the warning message to mention what lagg and what
  member are problematic.

Reviewed by: jtl, glebius
Sponsored by: Netflix
Differential Revision:	https://reviews.freebsd.org/D15046
2018-04-17 12:54:58 +00:00
Brooks Davis
eec02418d8 Remove support for FDDI and token ring media types in userland utilities.
Reviewed by:	kib
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15077
2018-04-16 18:07:51 +00:00
Brooks Davis
0437c8e3b1 Remove support for FDDI networks.
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).

Reviewed by:	kib, jhb
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15017
2018-04-11 17:28:24 +00:00
Konstantin Belousov
f137973487 Allow to specify PCP on packets not belonging to any VLAN.
According to 802.1Q-2014, VLAN tagged packets with VLAN id 0 should be
considered as untagged, and only PCP and DEI values from the VLAN tag
are meaningful.  See for instance
https://www.cisco.com/c/en/us/td/docs/switches/connectedgrid/cg-switch-sw-master/software/configuration/guide/vlan0/b_vlan_0.html.

Make it possible to specify PCP value for outgoing packets on an
ethernet interface.  When PCP is supplied, the tag is appended, VLAN
id set to 0, and PCP is filled by the supplied value.  The code to do
VLAN tag encapsulation is refactored from the if_vlan.c and moved into
if_ethersubr.c.

Drivers might have issues with filtering VID 0 packets on
receive.  This bug should be fixed for each driver.

Reviewed by:	ae (previous version), hselasky, melifaro
Sponsored by:	Mellanox Technologies
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D14702
2018-03-27 15:29:32 +00:00
Kirill Ponomarev
29c29cbb40 Extend SSID maximum string length to 32 chars to support longer SSID
names.

Approved by:	adrian
Differential Revision:	https://reviews.freebsd.org/D14710
2018-03-16 16:56:56 +00:00
Bryan Venteicher
33e0d8f057 Add support for IPv6 scoped addresses to vxlan
MFC after:	2 weeks
2017-12-30 04:03:53 +00:00
Bryan Venteicher
f53d97231b Use consistent name for the vxlan VNI parameter name and provide shorthand
Submitted by:	hrs
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D2868
2017-12-07 04:55:31 +00:00
Eric Joyner
b0f3e715fa ifconfig(8): Display extended compliance code string for SFP transceivers
- Updates tables in affected files with new entries from newer spec
revisions of SFF-8472, SFF-8024, and SFF-8636

- Change ifconfig to read and display the extended compliance code for
SFP media if the extended compliance code is not 0. This was being displayed
for QSFP transceivers only, but SFP28 media uses this to report 25G
capability.

Reviewed by:	melifaro, sbruno
Sponsored by:	Intel Corporation
Differential Revision:	https://reviews.freebsd.org/D13286
2017-12-05 18:42:07 +00:00
Pedro F. Giffuni
1de7b4b805 various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00
Pedro F. Giffuni
8a16b7a18f General further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:49:47 +00:00
Pedro F. Giffuni
df57947f08 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
Konstantin Belousov
3cf8254f1e Add a place for a driver to report rx timestamps in nanoseconds from
boot for the received packets.

The rcv_tstmp field overlaps the place of Ln header length indicators,
not used by received packets.  The basic pkthdr rearrangement change
in sys/mbuf.h was provided by gallatin.

There are two accompanying M_ flags: M_TSTMP means that there is the
timestamp (and it was generated by hardware).

Another flag M_TSTMP_HPREC indicates that the timestamp is
high-precision.  Practically M_TSTMP_HPREC means that hardware
provided additional precision comparing with the stamps when the flag
is not set.  E.g., for ConnectX all packets are stamped by hardware
when PCIe transaction to write out the completion descriptor is
performed, but PTP packet are stamped on port.  For Intel cards, when
PTP assist is enabled, only PTP packets are stamped in the limited
number of registers, so if Intel cards ever start support this
mechanism, they would always set M_TSTMP | M_TSTMP_HPREC if hardware
timestamp is present for the given packet.

Add IFCAP_HWRXTSTMP interface capability to indicate the support for
hardware rx timestamping, and ifconfig(8) command to toggle it.

Based on the patch by:	gallatin
Reviewed by:	gallatin (previous version), hselasky
Sponsored by:	Mellanox Technologies
MFC after:	2 weeks (? mbuf KBI issue)
X-Differential revision:	https://reviews.freebsd.org/D12638
2017-11-07 09:29:14 +00:00
Bryan Drewery
ea825d0274 DIRDEPS_BUILD: Update dependencies.
Sponsored by:	Dell EMC Isilon
2017-10-31 00:07:04 +00:00
Enji Cooper
188e46ab03 Add supporting changes for Add limited sandbox capability to "make check"
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
  and propagate the appropriate environment down to *.test.mk.

tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
  since tests/... is a special subdirectory tree compared to the others.

MFC after:	2 months
MFC with:	r322511
Reviewed by:	arch (silence), testing (silence)
Differential Revision:	D12014
2017-08-14 19:21:37 +00:00
Renato Botelho
af71799848 Add missing parenthesis on error message
Approved by:	loos
MFC after:	3 days
Sponsored by:	Rubicon Communications, LLC (Netgate)
2017-08-08 22:40:26 +00:00
Matt Joras
fdf2bc100e Selectively print "hwaddr" from ifconfig(8).
ifconfig(8) printing the hwaddr is only really useful if it differs from
the link layer address.

Reported by:	jhb
Reviewed by:	rpokala
Approved by:	rstone (mentor)
Differential Revision:	https://reviews.freebsd.org/D11777
2017-08-04 21:06:47 +00:00