Commit Graph

42126 Commits

Author SHA1 Message Date
Matt Jacob
5c1596a04a Some canonicalization function cleanups based upon some target mode
structure cleanups.
2003-09-13 01:57:31 +00:00
Matt Jacob
4578084aa3 No time like the present to turn back on SMP locking. 2003-09-13 01:56:45 +00:00
Matt Jacob
fd6eb9f769 Report correct active vs. nvram node/port WWNs in an ioctl. 2003-09-13 01:56:24 +00:00
Matt Jacob
28f0575cf1 On reset, make sure that we have some parameters set correctly. This
fixes a longstanding issue WRT resetting the chip after startup- it
would fail if we were connected as an F-port to a switch. If we
were connected as an F-port, we got assigned a hard loop ID of 255,
which is really a bogus loop id. Then when we turned around to
reset ourselves, the firmware would reject the ICB_INIT request
because the loop id was bogus. *sputter*

Minor fixlet from somebody in NetBSD with too much time on their
hands (dma -> DMA).
2003-09-13 01:55:44 +00:00
Tim J. Robbins
5f39b226ce Move an overly verbose message under #ifdef CODA_VERBOSE. 2003-09-13 01:13:56 +00:00
Thomas Moestl
09c06ee91f When determining the device class to use for the serial console, check
the "compatible" property too in the ns8250 case. This gets the serial
console to work on Blade 100s, where the device name is just "serial".

Reviewed by:	marcel
2003-09-12 20:13:23 +00:00
Thomas Moestl
894b85b150 Handle ISA devices in OF_decode_addr(), with the same code that is
used in the EBus case.
2003-09-12 20:04:29 +00:00
Poul-Henning Kamp
2a3d23acc6 Name the vnode method vectors consistently with the rest of the filesystems.
This improves the output of src/tools/tools/vop_table
2003-09-12 16:44:40 +00:00
Alan Cox
27d203eab3 pipe_build_write_buffer() only requires read access of the page that it
obtains from pmap_extract_and_hold().
2003-09-12 07:13:15 +00:00
Alan Cox
b9850eb224 Add a new parameter to pmap_extract_and_hold() that is needed to eliminate
Giant from vmapbuf().

Idea from:	tegge
2003-09-12 07:07:49 +00:00
Paul Saab
faf13262a4 Delay most of the adapter initilization until after interrupts are
enabled.

Tested by:	Richard Puga <puga@mauibuilt.com>
2003-09-11 23:30:28 +00:00
Marcel Moolenaar
8194412b89 Add support for using uart(4) for pulse capturing for the Pulse Per
Second (PPS) timing interface. The support is non-optional and by
default uses the DCD line signal as the pulse input. A compile-time
option (UART_PPS_ON_CTS) can be used to have uart(4) use the CTS line
signal.

Include <sys/timepps.h> in uart_bus.h to avoid having to add the
inclusion of that header in all source files.

Reviewed by: phk
2003-09-11 23:06:42 +00:00
Ruslan Ermilov
78f94aa951 Fix a bunch of off-by-one errors in the range checking code. 2003-09-11 21:40:21 +00:00
Poul-Henning Kamp
0c7721e8f9 Disable the use of cloning use in floppy and CD drivers.
This commit puts the relevant code snippets under #ifdef GONE_IN_5
(rather than #ifndef BURN_BRIDGES) thereby disabling the code now.

The code wil be entirely removed before 5.2 unless we find reasons
why this would be a bad idea.

Approach suggested by:	imp
2003-09-11 19:27:24 +00:00
Thomas Quinot
cc9ed6619f (atapi_action, case XPT_PATH_INQ): Handle properly the case of
CAM_TARGET_WILDCARD (target_id_t is an unsigned integer type).
Fixes boot-time crash on Alpha.

Reviewed by:	roberto
Approved by:	re (murray)
MFC after:	1 week
2003-09-11 17:34:47 +00:00
Søren Schmidt
fe78f9d47c Add support of the DIOCGSECTORSIZE & DIOCGMEDIASIZE ioctl's
so that newfs works on dvd-rw/dvd-ram again..
2003-09-11 15:59:16 +00:00
Yoshihiro Takahashi
8278014bce MFi386 revisions 1.570 and 1.571. 2003-09-11 14:07:02 +00:00
Yoshihiro Takahashi
916a70c619 MFi386: revision 1.204. 2003-09-11 14:05:06 +00:00
Yoshihiro Takahashi
c475aa0304 MFi386: revision 1.1093. 2003-09-11 13:44:48 +00:00
Yoshihiro Takahashi
79a5a35f9e Merged from sys/isa/fd.c revisions 1.252, 1.253, 1.254, 1.255 and 1.257. 2003-09-11 13:35:35 +00:00
Bill Paul
d5a5045921 Clean up dead code. 2003-09-11 08:28:38 +00:00
Bill Paul
804af9a1af Toggle the interface on and off before starting the diag test. This
seems to be necessary for the 8139C+ under certain circumstances, and
doesn't appear to hurt the other chips. (In the failure case, the
packet would be sent through the TX DMA ring but not get echoed
back. I suspect this has something to do with the link state changing
unexpectedly.)
2003-09-11 07:54:16 +00:00
Bill Paul
abc8ff44d3 - For the 8169 chips, read the station address by forcing an EEPROM
autoload and then copying the contends of the station address
  registers. For some reason, reading the EEPROM on the 8169S doesn't
  work right. This gets around the problem, and allows us to read
  the station address correctly on the 8169S.

- Insert a delay after initiating packet transmition in re_diag() to
  allow lots of time for the frame to echo back to the host, and wait
  for both the 'RX complete' and 'timeout expired' bits in the ISR
  register to be set.

- Deal more intelligently with the fact that the frame length
  field in the RX descriptor is a different width on the 8139C+
  than it is on the 8169/8169S/8110S

- For the 8169, you have to set bit 17 in the TX config register
  to enter digital loopback mode, but for the 8139C+, you have to
  set both bits 17 and 18. Take this into account so that re_diag()
  works properly for both types of chips.
2003-09-11 06:56:46 +00:00
Warner Losh
3e49a687ff Minor commentary cleanup, since I didn't understand the comments that
I wrote.
2003-09-11 04:22:28 +00:00
Warner Losh
04ea3df7d9 Fix compile on pc98. Maybe this is correct. 2003-09-11 04:14:26 +00:00
Bill Paul
5c75626b05 Re-enable VLAN_MTU capability for this driver. (Got reverted when
I pulled out the C+/8169 bits.)
2003-09-11 04:05:01 +00:00
Bill Paul
9bac70b851 Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S
ethernet chips. This driver is pretty simple, however it contains
special DSP initialization code which is needed in order to get
the chip to negotiate a gigE link. (This special initialization
may not be needed in subsequent chip revs.) Also:

- Fix typo in if_rlreg.h (RL_GMEDIASTAT_1000MPS -> RL_GMEDIASTAT_1000MBPS)

- Deal with shared interrupts in re_intr(): if interface isn't up,
  return.

- Fix another bug in re_gmii_writereg() (properly apply data field mask)

- Allow PHY driver to read the RL_GMEDIASTAT register via the
  re_gmii_readreg() register (this is register needed to determine
  real time link/media status).
2003-09-11 03:53:46 +00:00
Nate Lawson
5c5967082f Add a system notify handler in addition to the device notify handler.
At least some Toshiba notebooks use a Notify of 0 or 1 for this.

PR:
Submitted by:	Hiroyuki Aizu <aizu@navi.org>
2003-09-11 03:17:33 +00:00
Poul-Henning Kamp
e060b6bd03 Reorder a couple of KASSERTS to give more sensible messages.
Found by:	GEOM 101 class of '03
2003-09-11 00:49:02 +00:00
Marcel Moolenaar
87ad0260ff Rewrite the SAPIC initialization to always program the RTEs with what
we think is the correct trigger mode and polarity. This allows us to
implement BUS_CONFIG_INTR() as an update of the RTE in question.
Consequently, we can trust the RTE when we enable an interrupt and
avoids that we need to know about the trigger mode and polarity at
that time.
2003-09-10 22:49:38 +00:00
Marcel Moolenaar
24752c4291 Extend the ACPI resource handling to make use of the BUS_CONFIG_INTR()
method. This is necessary on ia64 where it's known that serial interfaces
described in the ACPI namespace may not have the well-known IRQs assigned
to them. This confuses us in thinking they are PCI based interrupts and
wrongly program the APIC.
2003-09-10 22:06:41 +00:00
Marcel Moolenaar
da13b8f9fe Introduce BUS_CONFIG_INTR(). The method allows devices to tell parents
about interrupt trigger mode and interrupt polarity. This allows ACPI
for example to pass interrupt resource information up the hierarchy.
The default implementation of the method therefore is to pass the
request to the parent.

Reviewed by: jhb, njl
2003-09-10 21:37:10 +00:00
David E. O'Brien
39e5f914ee Relent and back out rev 1.15. 2003-09-10 19:08:16 +00:00
David E. O'Brien
3fc40c2484 Sort 'bge' correctly. 2003-09-10 18:54:59 +00:00
Alan Cox
8373f36dbb In case vmapbuf() fails, release all of the held resources.
Submitted by:	tegge
2003-09-10 18:23:43 +00:00
Hidetoshi Shimokawa
8edbaf859d Fix asynchronous physio breakage introduced in rev 1.163.
We cannnot use bp->b_caller2 because DEV_STRATEGY will overwrite it.
2003-09-10 15:48:51 +00:00
Bill Paul
4ee1666125 Fix bug in re_gmii_writewreg(): we don't need to be screening out certain
PHY addresses here. (The chip will only let you talk to one PHY anyway.)
2003-09-10 15:14:46 +00:00
Bill Paul
966a07e907 Teach rl(4) about new hwrev codes. 2003-09-10 15:12:55 +00:00
Søren Schmidt
2194b6a479 Try a bit harder to probe disks that doesn't quite set BUSY right. 2003-09-10 09:57:16 +00:00
Bill Paul
69a6b7fb50 Update hardware revision table. 0x04000000 appears to be the revision
for the 8169S, according to my sample board. The RealTek Linux driver
mentions 0x00800000. I'm assigning this to the 8110S until I get
more info on it. (The (preliminary) RealTek docs only say that 8169S/8110S
chips will have some combination of those two bits set, but doesn't say
exactly what bit combination goes with which chip variant.)
2003-09-10 07:21:43 +00:00
John Baldwin
bbdaad6fee Whitespace. 2003-09-10 07:09:16 +00:00
John Baldwin
42a12b2bd8 Move the definitions for ACPI MADT table entries not present in the ACPICA
distribution to a MI header so it can be shared with other architectures.
2003-09-10 06:32:27 +00:00
John Baldwin
810cb9ef5e We represent PCI intpin's two different ways. One is the way that the
intpin register is expressed in hardware where 0 means none, 1 means INTA,
2 INTB, etc.  The other way is commonly used in loops where 0 means INTA,
1 means INTB, etc.  The matchpin argument to pci_cfgintr_search() is
supposed to be the first form, but we passsed in a loop index of the
second.  This fix adds one to the loop index to convert to the first form.

Reported by:	Pavlin Radoslavov <pavlin@icir.org>
2003-09-10 06:00:53 +00:00
John Baldwin
a7321ecb19 Finish an earlier commit:
Add a acpi_SetDefaultIntrModel() method to allow drivers to set the
interrupt model prior to the acpi0 device being probed and attached.
2003-09-10 05:29:30 +00:00
Marcel Moolenaar
c21e0da2f8 If we failed to size the Rx FIFO, assume the worst. This however
is not a size of 1. Since we already know there is a FIFO, we can
safely assume that it is at least 16 bytes. Note that all this is
mostly academic anyway. We don't use the size of the Rx FIFO
currently. If we add support for hardware flow control, we only
care about Rx FIFO sizes larger than 16.
2003-09-10 05:01:08 +00:00
Tim J. Robbins
e1d237ec05 Move an annoying printf() call that gets triggered every time an
operation is interrupted (with ^C or ^Z) under CODA_VERBOSE.
2003-09-10 01:41:15 +00:00
John Baldwin
a547af297d Remove an XXX comment by using the per CPU mask added after this comment
was added.
2003-09-10 01:36:48 +00:00
John Baldwin
4c93af3788 Add a acpi_SetDefaultIntrModel() method to allow drivers to set the
interrupt model prior to the acpi0 device being probed and attached.
2003-09-10 01:14:42 +00:00
John Baldwin
f03cb48d41 Fix a typo. 2003-09-10 01:11:58 +00:00
John Baldwin
674e1d4532 Add comments to the members of the timecounter struct similar to other
timecounters.
2003-09-10 01:10:24 +00:00