Commit Graph

390 Commits

Author SHA1 Message Date
Ian Lepore
868c7673d2 Remove MODULES_OVERRIDE="" for Marvel-based armv5 systems.
Also add some #NO_UNIVERSE to configs that essentially duplicate DB-88F6XXX.
2015-03-10 14:36:51 +00:00
Ian Lepore
140e744269 Remove MODULES_OVERRIDE="" and WITHOUT_MODULES="ahc" from armv6 configs.
These are left over from long ago when there was no way to load modules
on early armv6 platforms, and when there was a build problem with ahc
that has long since been fixed, and they just keep getting copy-pasted
into new configs.
2015-03-10 02:33:51 +00:00
Ian Lepore
f61d8cc6fe Remove the static DTB config and instead build modules/dtb/am335x.
Also, remove WITHOUT_MODULES="ahc" which was added long ago to work around
build problems that have long since been fixed correctly.

PR:		198460
2015-03-09 21:54:27 +00:00
Warner Losh
601e4171b4 Add the DTrace modules to the build, rather than only build the dtrace
modules.
2015-03-09 15:43:33 +00:00
Ruslan Bukin
32c282c74a Fix style. 2015-03-06 16:23:30 +00:00
Ian Lepore
2dec0ccd42 Add a "module" to build the dtb files for all supported imx6 systems. 2015-03-02 22:12:56 +00:00
Andrew Turner
e61722f320 Remove SMP support from the Wandboard-Solo and have it run as part of
universe as a config with sched_ule but without SMP.

Sponsored by:	The FreeBSD Foundation
2015-02-27 12:40:44 +00:00
George V. Neville-Neil
fcb5606706 Initial version of DTrace on ARM32.
Submitted by:	Howard Su based on work by Oleksandr Tymoshenko
Reviewed by:	ian, andrew, rpaulo, markj
2015-02-10 19:41:30 +00:00
Oleksandr Tymoshenko
2f99b597e0 Add VideoCore audio driver for Rasperry Pi (BCM2835) 2015-02-08 01:12:40 +00:00
Oleksandr Tymoshenko
939099221b Make VCHI driver optional and add "device vchiq" to default RPI-B config 2015-02-07 01:03:45 +00:00
Warner Losh
854739a4aa Pull in the rpi.dts -> rpi.dtb module (dtb/rpi) and have it install
rpi.dtb in /boot/dtb by default.
2015-02-07 00:41:08 +00:00
Ganbold Tsagaankhuu
e2763dca83 Enable Synopsys DesignWare Mobile Storage Host Controller
driver on Rockchip boards. It currently supports PIO mode
and dma mode needs external dma controller to be used.

Submitted by:   jmcneill
Approved by:    stas (mentor)
2015-01-20 09:07:28 +00:00
Navdeep Parhar
ca7fe84a61 Plug cxgbe(4) back into !powerpc && !arm builds, instead of building it
on amd64 only.
2015-01-16 01:39:24 +00:00
Luiz Otavio O Souza
2566c5264a Add support to turn off Beaglebone with poweroff(8) or shutdown(8) -p.
To cut off the power we need to start the shutdown sequence by writing
the OFF bit on PMIC.

Once the PMIC is programmed the SoC needs to toggle the PMIC_PWR_ENABLE
pin when it is ready for the PMIC to cut off the power.  This is done by
triggering the ALARM2 interrupt on SoC RTC.

The RTC driver only works in power management mode which means it won't
provide any kind of time keeping functionality.  It only implements a way
to trigger the ALARM2 interrupt when requested.

Differential Revision:	https://reviews.freebsd.org/D1489
Reviewed by:	rpaulo
MFC after:	2 weeks
2015-01-12 03:23:16 +00:00
Ian Lepore
740a7a7597 Enable ALT_BREAK_TO_DEBUGGER for rpi. 2015-01-12 02:29:23 +00:00
Warner Losh
c4765af73f Add infrastructure to build dtb files from dts files. 2015-01-08 18:28:06 +00:00
John Baldwin
3e32dff52c Remove "New" label from NFSCL/NFSD now that they are the only NFS
client/server.  While here, remove duplicate NFSCL from sys/conf/NOTES.

Approved by:	rmacklem
2015-01-06 16:15:57 +00:00
Ian Lepore
fbf1ef4849 Switch all arm kernels with option SMP to use SCHED_ULE instead of 4BSD. 2015-01-03 23:57:03 +00:00
Ian Lepore
dad0c32719 Remove commented-out options SMP and APIC_IO from old arm boards that will
never be able to support smp.
2015-01-03 23:30:29 +00:00
Andrew Turner
ef7eac4353 Switch i.MX to use the platform code to help with a single Freescale kernel.
Differential Revision:	https://reviews.freebsd.org/D1349
Reviewed by:	ian, rpaulo
2014-12-24 12:26:43 +00:00
Rick Macklem
c15882f091 Remove the old NFS client and server from head,
which means that the NFSCLIENT and NFSSERVER
kernel options will no longer work. This commit
only removes the kernel components. Removal of
unused code in the user utilities will be done
later. This commit does not include an addition
to UPDATING, but that will be committed in a
few minutes.

Discussed on: freebsd-fs
2014-12-23 00:47:46 +00:00
Andrew Turner
afa6f59cca Fix the indentation to simplify comparing the ARM config files. 2014-12-21 11:55:40 +00:00
Andrew Turner
0c08f78521 tart to clean up the armv6 kernel configs by reducing the diff between
them in the first sections and the later FDT support.

Differential Revision:	https://reviews.freebsd.org/D1346
Reviewed by:	rpaulo (earlier version)
2014-12-21 11:37:00 +00:00
Andrew Turner
9b2655e094 Clean up the style of the CUBIEBOARD2 config file 2014-12-20 18:42:20 +00:00
Andrew Turner
d943b9a337 Clean up to use the standard style of "options \t" and "device\t\t" 2014-12-20 18:15:23 +00:00
Ruslan Bukin
a8098016f1 o Add BERI Virtio Networking Frontend (if_vtbe)
o Move similar block/networking methods to common file
o Follow r275640 and correct MMIO registers width
o Pass value to MMIO platform_note method.

Sponsored by:	DARPA, AFRL
2014-12-09 16:39:21 +00:00
Ruslan Bukin
b4db959ac5 Add new devices to the config. 2014-11-25 16:24:31 +00:00
Alexander V. Chernikov
603eaf792b Renove faith(4) and faithd(8) from base. It looks like industry
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.

No objections from:	net@
2014-11-09 21:33:01 +00:00
John Baldwin
7d313e7bdb Add COMPAT_FREEBSD9 and COMPAT_FREEBSD10 options to wrap code that
provides compatability for FreeBSD 9.x and 10.x binaries.  Enable
these options in kernel configs that enable other COMPAT_FREEBSD<n>
options.
2014-10-24 19:58:24 +00:00
Ruslan Bukin
2d3f1b38a9 Provide a character device allowing us to access BERI memory regions.
Sponsored by:	DARPA, AFRL
2014-10-22 11:30:03 +00:00
Ruslan Bukin
8b62915e24 Add driver for Micrel KSZ9021 Gigabit Ethernet Transceiver (PHY).
Sponsored by:	DARPA, AFRL
2014-10-21 09:14:16 +00:00
Ruslan Bukin
b0da449e60 Add driver for BERI soft processor 'ring buffer' device.
Ring device provides a way for communicate to BERI
peripherals such as BERI debug unit and console.

Sponsored by:	DARPA, AFRL
2014-10-19 16:26:49 +00:00
Rui Paulo
b79090d6db Make the ti_mbox and ti_pruss drivers optional.
MFC after:	1 week
2014-10-18 17:00:55 +00:00
Rui Paulo
2ffc65f982 Add a driver for the TI watchdog.
The TI watchdog timer is present on BeagleBone's.  Since 2014, U-Boot
has been booting the BeagleBone with the watchdog enabled.  We need to
disable it on boot to avoid a spurious reset.
The timer isn't exactly precise, but it will do as a watchdog.  This
is also a reflection of the watchdog(9) API.

In the future, we could handle interrupts, but the watchdog(9) API
needs to be a bit smarter before that can happen.

Differential Revision:	https://reviews.freebsd.org/D965
Reviewed by:	andrew
MFC after:	1 week
Relnotes:	yes
2014-10-18 16:59:21 +00:00
Andrew Turner
917256cd36 Uncomment general options from the Pandaboard config. These are in other
configs and there is no reason for them not to be here.
2014-10-14 14:32:58 +00:00
Andrew Turner
56f4208d56 Remove the need for files.beaglebone and std.beaglebone by moving the one
option they defined into files.am335x.
2014-10-13 16:16:32 +00:00
Ruslan Bukin
d4d630aebe o Add machine-dependent SMP part
o Enable SMP

Sponsored by:	DARPA, AFRL
2014-10-10 14:35:51 +00:00
Ruslan Bukin
41709d23c4 Add driver for Synopsys DesignWare Mobile Storage Host Controller.
Sponsored by:	DARPA, AFRL
2014-10-07 17:39:30 +00:00
Ruslan Bukin
5d43fd685b Add driver for Synopsys DesignWare 3504-0 Universal 10/100/1000
Ethernet MAC.

Sponsored by:	DARPA, AFRL
2014-09-25 18:03:14 +00:00
Gavin Atkinson
265f42be76 Move the ARM Samsung s3c2xx0 support files into the samsung directory, to
match other platforms.

Discussed with:	andrew
2014-09-25 11:38:26 +00:00
Andrew Turner
e72deda6c8 Create a common i.MX53 config and use it with the two existing i.MX53
boards.

This is just intended to split the common config entries out, further
cleanup is expected.

Reviewed by:	ian@, rpaulo@ (earlier version)
Differential Revision: https://reviews.freebsd.org/D731
2014-09-07 08:16:27 +00:00
Ian Lepore
5a782ebbd8 The iomux driver is no longer optional, all imx platforms have it as
standard now, so remove it from kernel configs.
2014-09-04 14:59:27 +00:00
Ruslan Bukin
9493c332a3 Add initial support for Altera SOCFPGA (heterogeneous ARM/FPGA) SoC family.
Include board configuration for Terasic SoCKit (Altera Cyclone V).

Sponsored by:	DARPA, AFRL
2014-09-04 12:44:40 +00:00
Ian Lepore
64e9597058 Remove DIAGNOSTIC from the kernel config of low-end arm systems. Sanity
checks such as vmem_check() can make a low-end system go completely
unresponsive for as much as 3 seconds out of every 10.
2014-09-03 19:37:41 +00:00
Ian Lepore
df63a5d236 Fixes and enhancements for the if_cgem driver...
- miibus fixes as suggested by Yonghyeon Pyun.
- enable VLAN MTU support.
- fix a few WITNESS complaints in cgem_attach().
- have cgem_attach() properly init the ifnet struct before calling
  mii_attach() to fix panic when using e1000phy.
- fix ethernet address changing.
- fix transmit queue overflow handling.
- tweak receive queue handling to reduce receive overflows.
- bring out MAC statistic counters to sysctls.
- add e1000phy to config file.
- implement receive hang work-around described in reference guide.
- change device name from if_cgem to cgem to be consistent with other
  interfaces.

Submitted by:	Thomas Skibo <ThomasSkibo@sbcglobal.net>
Reviewed by:	wkoszek, Yonghyeon PYUN <pyunyh@gmail.com>
2014-09-03 17:51:03 +00:00
Warner Losh
877c97e5bd Resync comments about scbus and pass for life after AHCI joined CAM.
Sponsored by: Netflix
2014-09-01 03:49:21 +00:00
Ian Lepore
93844d3203 Put option FDT into the base IMX6 config and remove it from the config
of boards based on IMX6.
2014-08-31 15:25:40 +00:00
Michael Tuexen
65d495a87e Enable SCTP support. It runs perfectly fine on a Wandboard quad.
MFC after: 3 days
2014-08-30 20:18:47 +00:00
Michael Tuexen
3cb6ceedb7 Remove FDT option, since it is in every file, which includes this one. 2014-08-30 20:00:18 +00:00
Warner Losh
8f5f93be3a Convert the HL201 config file to use FDT. 2014-08-17 16:53:10 +00:00