Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
The ath10k firmware supports hardware WEP offload, and in native wifi mode
(or 802.3 ethernet mode, for that matter) the WEP key isn't actually included
in the TX payload from net80211. Instead, a separate firmware command is issued
that sets the default TX key to be the specified key.
However, net80211 doesn't at all inform the driver layer that this is
occuring - it just "expects" to be inserting WEP header information
when doing WEP TX, even with hardware encryption.
So, to better support the newer world order, turn the default TX key assignment
into a VAP method that can be overridden by the driver and ensure its wrapped
in a crypto begin/end set. That way it should be correctly atomic from the
point of view of keychanges (as long as the driver does the right thing.)
It'd be nice if we passed through to the key_set call a flag that says
"also make this the default key" - that's captured here by calling the
deftxkey method after the key_set method. Maybe I can do that later.
Note: this is a net80211 ABI change, and will require a kernel+modules
recompile. Happy Holidays, etc.
Tested:
* ath10k driver port
* rtwn_usb, WEP station
* teach the crypto modules about receive offload - although I have
to do some further reviewing in places where we /can't/ have an RX key
* teach the RX data path about receive offload encryption - check the flag,
handle NULL key, do decap and checking as appropriate.
Tested:
* iwn(4), STA mode
* ath(4), STA and AP mode
* ath10k port, STA mode (hardware encryption)
Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D8533
* extend the keycache flag word to be 32 bits, not 16 bits
* add new key flags for transmit:
+ IEEE80211_KEY_NOIV: Don't insert IV in the payload when transmitting data frames;
+ IEEE80211_KEY_NOIVMGT: Don't insert IV in the payload when transmitting MIC frames;
+ IEEE80211_KEY_NOMIC: Don't insert MIC in the payload when transmitting data frames;
+ IEEE80211_KEY_NOMICMGT: don't insert MIC in the payload when transmitting management
frames.
* teach ieee80211_crypto_demic() about hardware decrypted frames:
+ if frames are hardware decrypted and the frame has failed MIC, treat it as a
michael failure.
+ if frames are hardware decrypted and the frame has stripped MIC, we can't check the
MIC in the payload - we don't have anything to compare it against.
This is only part of the work required to successfully transmit/receive
hardware crypto frames such as the qualcomm atheros 11ac offload chips.
There will be further work in the transmit and receive path before this
can be done by default.
Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D8364
Add IEEE80211_KEY_SWCRYPT / IEEE80211_KEY_SWMIC bits to the
IEEE80211_KEY_DEVICE mask - as a result, those bits will be preserved
during group key handshake.
A driver can override them in iv_key_alloc() for some keys in case
when hardware crypto support is not possible. As an example:
- multi-vap without multicast key search support;
- IBSS RSN for devices w/ fixed storage for group keys;
Tested with RTL8188EU (AP, sw crypto) and
RTL8821AU (STA, sw crypto for group keys + hw crypto for pairwise keys)
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D7901
This can be used to update IV state for the caller without adding
information to the mbuf. Some hardware (eg rum) apparently requires
bits of this.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3638
this was broken in r183248 when the check of wk_keyix was replaced by
a check of IEEE80211_KEY_DEVKEY (because the flag was clobbered). Define
IEEE80211_KEY_DEVICE to specify flags that are owned by net80211/driver
and use this to preserve IEEE80211_KEY_DEVKEY so we don't ask the driver
for another key index when we already have one.
Testing by: Daniel Thiele, Wes Morgan
Reviewed by: rpaulo
Approved by: re (kib)
o don't use the key index to identify when the driver has been
asked to allocate a key slot, use an explicit flag; allows
drivers to force s/w fallback for entries in the global table
o change callback api to allocate driver resources for a crypto key:
- de-const the key parameter so drivers can muck with the flags
- on callback failure don't automatically try to setup s/w crypto;
instead the driver must now mark the key entry for s/w crypto and
the caller will re-attach the cipher module
NB: api change permits drivers more control over fallback to s/w
crypto (e.g. based on a limited number of h/w key slots)
address specified in the ioctl and for drivers that need the address
to locate a key (e.g. for delete).
Note this changes net80211-private api's but not the driver callback;
may want to change that in the future.
Reviewed by: sephe, thompsa
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.
Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
it; instead pass the space occupied by the header down into the
crypto modules (except in the demic case which needs it only when
doing int in s/w)
o while here fix defrag to strip the header from 2nd and later frames
o teach decap code how to handle 4-address frames
o don't pre-assign key index to the global key table entries so device
has a chance to decide what to use
o make ieee80211_crypto_newkey take the desired flags as an argument
instead of wacking the key structure directly; this eliminates a
bunch of code warts
o add a new flag IEEE80211_KEY_GROUP to indicate a key is a WPA Group
key so devices don't need to guess (temporarily add this flag in the
ioctl code until we can get wpa_supplicant+hostapd updated)
o shuffle IEEE80211_KEY_* bits to move flags used internally to the high
nibble of the flags word
Reviewed by: Tai-hwa Liang
here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM,
AP-side power-save, crypto plugin framework, authenticator plugin framework,
and access control plugin frameowrk.
o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
almost all ifmedia actions
o multi-mode support for 11a/b/g devices
o 11g protocol additions (incomplete)
o new element id additions (for other than 11g)
o node/station table redone for proper locking and to eliminate driver
incestuousness
o split device flags and capabilities to reduce confusion and provide room
for expansion
o incomplete power management infrastructure (need to revisit)
o incomplete hooks for software retry
o more...
