Commit Graph

30 Commits

Author SHA1 Message Date
Rick Macklem
dfd174d6e0 Fix the client side krpc from doing TCP reconnects for ERESTART from sosend().
When sosend() replies ERESTART in the client side krpc, it indicates that
the RPC message hasn't yet been sent and that the send queue is full or
locked while a signal is posted for the process.
Without this patch, this would result in a RPC_CANTSEND reply from
clnt_vc_call(), which would cause clnt_reconnect_call() to create a new
TCP transport connection. For most NFS servers, this wasn't a serious problem,
although it did imply retries of outstanding RPCs, which could possibly
have missed the DRC.
For an NFSv4.1 mount to AmazonEFS, this caused a serious problem, since
AmazonEFS often didn't retain the NFSv4.1 session and would reply with
NFS4ERR_BAD_SESSION. This implies to the client a crash/reboot which
requires open/lock state recovery.

Three options were considered to fix this:
- Return the ERESTART all the way up to the system call boundary and then
  have the system call redone. This is fraught with risk, due to convoluted
  code paths, asynchronous I/O RPCs etc. cperciva@ worked on this, but it
  is still a work in prgress and may not be feasible.
- Set SB_NOINTR for the socket buffer. This fixes the problem, but makes
  the sosend() completely non interruptible, which kib@ considered
  inappropriate. It also would break forced dismount when a thread
  was blocked in sosend().
- Modify the retry loop in clnt_vc_call(), so that it loops for this case
  for up to 15sec. Testing showed that the sosend() usually succeeded by
  the 2nd retry. The extreme case observed was 111 loop iterations, or
  about 100msec of delay.
This third alternative is what is implemented in this patch, since the
change is:
- localized
- straightforward
- forced dismount is not broken by it.

This patch has been tested by cperciva@ extensively against AmazonEFS.

Reported by:	cperciva
Tested by:	cperciva
MFC after:	2 weeks
2017-05-07 12:12:45 +00:00
Rick Macklem
34f1fddb1e Fix a crash during unmount of an NFSv4.1 mount.
Larry Rosenman reported a crash on freebsd-current@ which was caused by
a premature release of the krpc backchannel socket structure.
I believe this was caused by a race between the SVC_RELEASE() in clnt_vc.c
and the xprt_unregister() in the higher layer (clnt_rc.c), which tried
to lock the mutex in the xprt structure and crashed.
This patch fixes this by removing the xprt_unregister() in the clnt_vc
layer and allowing this to always be done by the clnt_rc (higher reconnect
layer).

Reported by:	ler@lerctr.org
Tested by:	ler@letctr.org
MFC after:	2 weeks
2017-04-10 22:47:18 +00:00
Enji Cooper
7d3db23544 Deobfuscate cleanup path in clnt_vc_create(..)
Similar to r300836, r301800, and r302550, cl and ct will always
be non-NULL as they're allocated using the mem_alloc routines,
which always use `malloc(..., M_WAITOK)`.

MFC after: 1 week
Reported by: Coverity
CID: 1007342
Sponsored by: EMC / Isilon Storage Division
2016-07-11 07:07:15 +00:00
Pedro F. Giffuni
6244c6e7db sys/rpc: minor spelling fixes.
No functional change.
2016-05-06 01:49:46 +00:00
Gleb Smirnoff
cfa6009e36 In preparation of merging projects/sendfile, transform bare access to
sb_cc member of struct sockbuf to a couple of inline functions:

sbavail() and sbused()

Right now they are equal, but once notion of "not ready socket buffer data",
will be checked in, they are going to be different.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-11-12 09:57:15 +00:00
Christian Brueffer
c3e2c655a5 Properly free resources in case of error.
CID:		1007032
Found with:	Coverity Prevent(tm)
MFC after:	2 weeks
2014-05-02 20:45:55 +00:00
Dimitry Andric
a6132f60af Remove some unused static const strings under sys/rpc, which have never
been used since the initial commit (r177633).

MFC after:	3 days
2013-12-24 20:55:22 +00:00
Hiroki Sato
2e322d3796 Replace Sun RPC license in TI-RPC library with a 3-clause BSD license,
with the explicit permission of Sun Microsystems in 2009.
2013-11-25 19:04:36 +00:00
John Baldwin
3b14c753ff Revert 195703 and 195821 as this special stop handling in NFS is now
implemented via VFCF_SBDRY rather than passing PBDRY to individual
sleep calls.
2013-03-13 21:06:03 +00:00
Gleb Smirnoff
bd54830bcb Use m_get(), m_gethdr() and m_getcl() instead of historic macros.
Sponsored by:	Nginx, Inc.
2013-03-12 12:17:19 +00:00
Rick Macklem
e2adc47dbb Add support for backchannels to the kernel RPC. Backchannels
are used by NFSv4.1 for callbacks. A backchannel is a connection
established by the client, but used for RPCs done by the server
on the client (callbacks). As a result, this patch mixes some
client side calls in the server side and vice versa. Some
definitions in the .c files were extracted out into a file called
krpc.h, so that they could be included in multiple .c files.
This code has been in projects/nfsv4.1-client for some time.
Although no one has given it a formal review, I believe kib@
has taken a look at it.
2012-12-08 00:29:16 +00:00
Gleb Smirnoff
eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
Pedro F. Giffuni
0c2222baf4 libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.

This change matches the reference (OpenSolaris) implementation.

Tested by:	David Wolfskill
Obtained from:	Bull GNU/Linux NFSv4 Project (libtirpc)
MFC after:	2 weeks
2012-10-02 19:10:19 +00:00
Pedro F. Giffuni
c148237d44 Partial revert of r239963:
The following change caused rpc.lockd to exit after startup:
____

libtirpc: be sure to free cl_netid and cl_tp

When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the
same way.
____

MFC after:	3 days
Reported by:	David Wolfskill
Tested by:	David Wolfskill
2012-09-24 03:14:17 +00:00
Pedro F. Giffuni
43981b6c53 Bring some changes from Bull's NFSv4 libtirpc implementation.
We especifically ignored the glibc compatibility changes
but this should help interaction with Solaris and Linux.
____

Fixed infinite loop in svc_run()
author	Steve Dickson
Tue, 10 Jun 2008 12:35:52 -0500 (13:35 -0400)
Fixed infinite loop in svc_run()
____

__rpc_taddr2uaddr_af() assumes the netbuf to always have a
non-zero data. This is a bad assumption and can lead to a
seg-fault. This patch adds a check for zero length and returns
NULL when found.
author	Steve Dickson
Mon, 27 Oct 2008 11:46:54 -0500 (12:46 -0400)
____

Changed clnt_spcreateerror() to return clearer
and more concise error messages.
author	Steve Dickson
Thu, 20 Nov 2008 08:55:31 -0500 (08:55 -0500)
____

Converted all uid and gid variables of the type uid_t and gid_t.
author	Steve Dickson
Wed, 28 Jan 2009 12:44:46 -0500 (12:44 -0500)
____

libtirpc: set r_netid and r_owner in __rpcb_findaddr_timed

These fields in the rpcbind GETADDR call are being passed uninitialized
to CLNT_CALL. In the case of x86_64 at least, this usually leads to a
segfault. On x86, it sometimes causes segfaults and other times causes
garbage to be sent on the wire.

rpcbind generally ignores the r_owner field for calls that come in over
the wire, so it really doesn't matter what we send in that slot. We just
need to send something. The reference implementation from Sun seems to
send a blank string. Have ours follow suit.
author	Jeff Layton
Fri, 13 Mar 2009 11:44:16 -0500 (12:44 -0400)
____

libtirpc: be sure to free cl_netid and cl_tp

When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.

author	Jeff Layton
Fri, 13 Mar 2009 11:47:36 -0500 (12:47 -0400)

Obtained from:	Bull GNU/Linux NFSv4 Project
MFC after:	3 weeks
2012-09-01 02:56:17 +00:00
Rick Macklem
7b67bd9f3d This patch is believed to fix a problem in the kernel rpc for
non-interruptible NFS mounts, where a kernel thread will seem
to be stuck sleeping on "rpccon". The msleep() in clnt_vc_create()
that was waiting to a TCP connect to complete would return ERESTART,
since PCATCH was specified. Then the tsleep() in clnt_reconnect_call()
would sleep for 1 second and then try again and again and...
The patch changes the msleep() in clnt_vc_create() so it only sets
the PCATCH flag for interruptible cases.

Tested by:	pho
Reviewed by:	jhb
MFC after:	2 weeks
2011-04-27 18:19:26 +00:00
Rick Macklem
5e8eb3cd4e Fix a couple of mbuf leaks introduced by r217242. I do
not believe that these leaks had a practical impact,
since the situations in which they would have occurred
would have been extremely rare.

MFC after:	2 weeks
2011-04-13 00:03:49 +00:00
Bjoern A. Zeeb
1fb51a12f2 Mfp4 CH=177274,177280,177284-177285,177297,177324-177325
VNET socket push back:
  try to minimize the number of places where we have to switch vnets
  and narrow down the time we stay switched.  Add assertions to the
  socket code to catch possibly unset vnets as seen in r204147.

  While this reduces the number of vnet recursion in some places like
  NFS, POSIX local sockets and some netgraph, .. recursions are
  impossible to fix.

  The current expectations are documented at the beginning of
  uipc_socket.c along with the other information there.

  Sponsored by: The FreeBSD Foundation
  Sponsored by: CK Software GmbH
  Reviewed by:  jhb
  Tested by:    zec

Tested by:	Mikolaj Golub (to.my.trociny gmail.com)
MFC after:	2 weeks
2011-02-16 21:29:13 +00:00
Rick Macklem
2a1e0fb436 Fix a bug in the client side krpc where it was, sometimes
erroneously, assumed that 4 bytes of data were in the first
mbuf of a list by replacing the bcopy() with m_copydata().
Also, replace the uses of m_pullup(), which can fail for
reasons other than not enough data, with m_copydata().
For the cases where it isn't known that there is enough
data in the mbuf list, check first via m_len and m_length().
This is believed to fix a problem reported by dpd at dpdtech.com
and george+freebsd at m5p.com.

Reviewed by:	jhb
MFC after:	8 days
2011-01-10 21:35:10 +00:00
Rick Macklem
cec077bc8f Fix the krpc so that it can handle NFSv3,UDP mounts with a read/write
data size greater than 8192. Since soreserve(so, 256*1024, 256*1024)
would always fail for the default value of sb_max, modify clnt_dg.c
so that it uses the calculated values and checks for an error return
from soreserve(). Also, add a check for error return from soreserve()
to clnt_vc.c and change __rpc_get_t_size() to use sb_max_adj instead of
the bogus maxsize == 256*1024.

PR:		kern/150910
Reviewed by:	jhb
MFC after:	2 weeks
2010-10-13 00:57:14 +00:00
Rick Macklem
f991753321 Add a check for the connection being shut down to the krpc
client just before queuing a request for the connection. The
code already had a check for the connection being shut down
while the request was queued, but not one for the shut down
having been initiated by the server before the request was
in the queue. This appears to fix the problem of slow reconnects
against an NFS server that drops inactive connections reported
by Olaf Seibert, but does not fix the case
where the FreeBSD client generates RST segments at about the
same time as ACKs. This is still a problem that is being
investigated. This patch does not cause a regression for this
case.

Tested by:	Olaf Seibert, Daniel Braniss
Reviewed by:	dfr
MFC after:	5 days
2009-11-08 19:02:13 +00:00
Marko Zec
0348c661d1 Fix NFS panics with options VIMAGE kernels by apropriately setting curvnet
context inside the RPC code.

Temporarily set td's cred to mount's cred before calling socreate() via
__rpc_nconf2socket().

Submitted by:	rmacklem (in part)
Reviewed by:	rmacklem, rwatson
Discussed with:	dfr, bz
Approved by:	re (rwatson), julian (mentor)
MFC after:	3 days
2009-08-24 10:09:30 +00:00
Konstantin Belousov
b35687df13 Use PBDRY flag for msleep(9) in NFS and NLM when sleeping thread owns
kernel resources that block other threads, like vnode locks. The SIGSTOP
sent to such thread (process, rather) shall not stop it until thread
releases the resources.

Tested by:	pho
Reviewed by:	jhb
Approved by:	re (kensmith)
2009-07-14 22:54:29 +00:00
Rick Macklem
3144f81221 Fix upcall races in the client side krpc. For the client side upcall,
holding SOCKBUF_LOCK() isn't sufficient to guarantee that there is
no upcall in progress, since SOCKBUF_LOCK() is released/re-acquired
in the upcall. An upcall reference counter was added to the upcall
structure that is incremented at the beginning of the upcall and
decremented at the end of the upcall. As such, a reference count == 0
when holding the SOCKBUF_LOCK() guarantees there is no upcall in
progress. Add a function that is called just after soupcall_clear(),
which waits until the reference count == 0.
Also, move the mtx_destroy() down to after soupcall_clear(), so that
the mutex is not destroyed before upcalls are done.

Reviewed by:	dfr, jhb
Tested by:	pho
Approved by:	kib (mentor)
2009-06-04 14:49:27 +00:00
John Baldwin
74fb0ba732 Rework socket upcalls to close some races with setup/teardown of upcalls.
- Each socket upcall is now invoked with the appropriate socket buffer
  locked.  It is not permissible to call soisconnected() with this lock
  held; however, so socket upcalls now return an integer value.  The two
  possible values are SU_OK and SU_ISCONNECTED.  If an upcall returns
  SU_ISCONNECTED, then the soisconnected() will be invoked on the
  socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls.  The
  API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
  the receive socket buffer automatically.  Note that a SO_SND upcall
  should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
  instead of calling soisconnected() directly.  They also no longer need
  to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
  state machine, but other accept filters no longer have any explicit
  knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
  while invoking soreceive() as a temporary band-aid.  The plan for
  the future is to add a new flag to allow soreceive() to be called with
  the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
  buffer locked.  Previously sowakeup() would drop the socket buffer
  lock only to call aio_swake() which immediately re-acquired the socket
  buffer lock for the duration of the function call.

Discussed with:	rwatson, rmacklem
2009-06-01 21:17:03 +00:00
Doug Rabson
a9ccfd56e3 Add a missing call to mtx_destroy(). 2008-11-12 12:21:18 +00:00
Doug Rabson
a9148abd9d Implement support for RPCSEC_GSS authentication to both the NFS client
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager.  I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.

The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.

To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.

As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.

Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.

The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.

Sponsored by:	Isilon Systems
MFC after:	1 month
2008-11-03 10:38:00 +00:00
Doug Rabson
c675522fc4 Re-implement the client side of rpc.lockd in the kernel. This implementation
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3) library. It also implements
recovery from server restarts and ensures that dirty cache blocks are written
to the server before obtaining locks (allowing multiple clients to use file
locking to safely share data).

Sponsored by:	Isilon Systems
PR:		94256
MFC after:	2 weeks
2008-06-26 10:21:54 +00:00
Doug Rabson
ee31b83a3a Minor changes to improve compatibility with older FreeBSD releases. 2008-03-28 09:50:32 +00:00
Doug Rabson
dfdcada31e Add the new kernel-mode NFS Lock Manager. To use it instead of the
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.

Highlights include:

* Thread-safe kernel RPC client - many threads can use the same RPC
  client handle safely with replies being de-multiplexed at the socket
  upcall (typically driven directly by the NIC interrupt) and handed
  off to whichever thread matches the reply. For UDP sockets, many RPC
  clients can share the same socket. This allows the use of a single
  privileged UDP port number to talk to an arbitrary number of remote
  hosts.

* Single-threaded kernel RPC server. Adding support for multi-threaded
  server would be relatively straightforward and would follow
  approximately the Solaris KPI. A single thread should be sufficient
  for the NLM since it should rarely block in normal operation.

* Kernel mode NLM server supporting cancel requests and granted
  callbacks. I've tested the NLM server reasonably extensively - it
  passes both my own tests and the NFS Connectathon locking tests
  running on Solaris, Mac OS X and Ubuntu Linux.

* Userland NLM client supported. While the NLM server doesn't have
  support for the local NFS client's locking needs, it does have to
  field async replies and granted callbacks from remote NLMs that the
  local client has contacted. We relay these replies to the userland
  rpc.lockd over a local domain RPC socket.

* Robust deadlock detection for the local lock manager. In particular
  it will detect deadlocks caused by a lock request that covers more
  than one blocking request. As required by the NLM protocol, all
  deadlock detection happens synchronously - a user is guaranteed that
  if a lock request isn't rejected immediately, the lock will
  eventually be granted. The old system allowed for a 'deferred
  deadlock' condition where a blocked lock request could wake up and
  find that some other deadlock-causing lock owner had beaten them to
  the lock.

* Since both local and remote locks are managed by the same kernel
  locking code, local and remote processes can safely use file locks
  for mutual exclusion. Local processes have no fairness advantage
  compared to remote processes when contending to lock a region that
  has just been unlocked - the local lock manager enforces a strict
  first-come first-served model for both local and remote lockers.

Sponsored by:	Isilon Systems
PR:		95247 107555 115524 116679
MFC after:	2 weeks
2008-03-26 15:23:12 +00:00