Commit Graph

46 Commits

Author SHA1 Message Date
Marius Strobl
5187458fcd - First pass at const'ifying ata(4) as appropriate.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers

MFC after:	1 week
2012-03-21 16:59:39 +00:00
Ulrich Spörlein
9a14aa017b Convert files to UTF-8 2012-01-15 13:23:18 +00:00
Warner Losh
907659f0dc Minor formatting nits. 2010-07-04 05:58:17 +00:00
Warner Losh
aef30cdbf5 Check the Disk FUNCE recorded in the CIS to see if we should probe for
both disks, or if we should suppress the slave drive.  Default to
suppressing the slave, in the case that this REQIURED tuple turns out
to not actually be present...
2009-03-12 06:30:59 +00:00
Alexander Motin
b50bb79c6a Use channel driver's attach/detach routines instead of ata_attach()/
ata_detach() to implement IOCATAATTACH/IOCATADETACH ioctls.
This will permit channel drivers to properly shutdown port hardware on channel
detach and init it on attach.
2009-02-19 12:47:24 +00:00
Søren Schmidt
9f82379c24 Add experimental support for SATA Port Multipliers
Support is working on the Silicon Image SiI3124/3132.
Support is working on some AHCI chips but far from all.

Remember this is WIP, so test reports and (constructive) suggestions are welcome!
2008-04-10 13:05:05 +00:00
Søren Schmidt
129230b816 Update copyright headers. 2007-02-21 19:07:19 +00:00
Søren Schmidt
e2bf77c5c2 Get rid of the advertising clause in the copyright. 2006-01-05 21:27:19 +00:00
Warner Losh
b7a9396a75 Forgot to commit ata-card fixes last night. Fix gleb's attempt to do
the right thing by merging in the changes I neglected to commit last
night.
2005-09-22 18:46:29 +00:00
Gleb Smirnoff
e21d20fc4c Fix build. 2005-09-22 18:41:56 +00:00
Warner Losh
ab581af779 Eliminate unused argument in PCMCIA_CARD macro.
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.

Approved by: re (dwhite)
2005-06-24 14:36:54 +00:00
Søren Schmidt
0068f98f88 Take newbusification one step further, ie use the device_t more consequently
all way through the code down the layers, instead of the mix'n'match that
resulted from the conversion done earlier.

Sponsored by:	pair.com
2005-04-30 16:22:07 +00:00
Søren Schmidt
ca8c70e9e3 Provide a default setmode method.
This shaves off multiple copies of the same setmode stub.
2005-04-28 22:15:44 +00:00
Søren Schmidt
ecd6c15d6a Cosmetics 2005-04-25 07:57:04 +00:00
Søren Schmidt
d5514ba365 Add a ata_setmode method so we dont panic on setmode.
Note that the mode is only set on the device, we (mostly) have
no knowledge on how to set mode on the controller if at all possible.
2005-04-13 07:14:17 +00:00
Søren Schmidt
0e1eb6828c Add support for controllers that doesn't have the usual taskfile
layout.  No functional changes.
2005-04-06 10:22:56 +00:00
Søren Schmidt
8ca4df3299 This is the much rumoured ATA mkIII update that I've been working on.
o       ATA is now fully newbus'd and split into modules.
        This means that on a modern system you just load "atapci and ata"
        to get the base support, and then one or more of the device
        subdrivers "atadisk atapicd atapifd atapist ataraid".
        All can be loaded/unloaded anytime, but for obvious reasons you
        dont want to unload atadisk when you have mounted filesystems.

o       The device identify part of the probe has been rewritten to fix
        the problems with odd devices the old had, and to try to remove
        so of the long delays some HW could provoke. Also probing is done
	without the need for interrupts, making earlier probing possible.

o       SATA devices can be hot inserted/removed and devices will be created/
        removed in /dev accordingly.
	NOTE: only supported on controllers that has this feature:
	Promise and Silicon Image for now.
	On other controllers the usual atacontrol detach/attach dance is
	still needed.

o	Support for "atomic" composite ATA requests used for RAID.

o       ATA RAID support has been rewritten and and now supports these
        metadata formats:
                 "Adaptec HostRAID"
                 "Highpoint V2 RocketRAID"
                 "Highpoint V3 RocketRAID"
                 "Intel MatrixRAID"
                 "Integrated Technology Express"
                 "LSILogic V2 MegaRAID"
                 "LSILogic V3 MegaRAID"
                 "Promise FastTrak"
                 "Silicon Image Medley"
		 "FreeBSD PseudoRAID"

o       Update the ioctl API to match new RAID levels etc.

o       Update atacontrol to know about the new RAID levels etc
        NOTE: you need to recompile atacontrol with the new sys/ata.h,
        make world will take care of that.
	NOTE2: that rebuild is done differently from the old system as
	the rebuild is now done piggybacked on read requests to the
	array, so atacontrol simply starts a background "dd" to rebuild
	the array.

o       The reinit code has been worked over to be much more robust.

o       The timeout code has been overhauled for races.

o	Support of new chipsets.

o       Lots of fixes for bugs found while doing the modulerization and
        reviewing the old code.

Missing or changed features from current ATA:

o       atapi-cd no longer has support for ATAPI changers. Todays its
        much cheaper and alot faster to copy those CD images to disk
        and serve them from there. Besides they dont seem to be made
        anymore, maybe for that exact reason.

o       ATA RAID can only read metadata from all the above metadata formats,
	not write all of them (Promise and Highpoint V2 so far). This means
	that arrays can be picked up from the BIOS, but they cannot be
	created from FreeBSD. There is more to it than just the missing
	write metadata support, those formats are not unique to a given
	controller like Promise and Highpoint formats, instead they exist
	for several types, and even worse, some controllers can have
	different formats and its impossible to tell which one.
	The outcome is that we cannot reliably create the metadata of those
	formats and be sure the controller BIOS will understand it.
	However write support is needed to update/fail/rebuild the arrays
	properly so it sits fairly high on the TODO list.

o       So far atapicam is not supported with these changes. When/if this
	will change is up to the maintainer of atapi-cam so go there for
	questions.

HW donated by:  Webveveriet AS
HW donated by:  Frode Nordahl
HW donated by:  Yahoo!
HW donated by:  Sentex
Patience by:	Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
Warner Losh
72217cb810 Catchup to the iodata renaming 2005-01-26 06:30:55 +00:00
Warner Losh
053a2b550f Tweaks to the resource allocation to allow a few of my obscure
cdrom/ata controller PC Card devices work better.
2004-11-10 00:33:05 +00:00
Lukas Ertl
dc6b9c2d6e Return the unit number of a channel instead of a hardcoded '1' from
the ATA pccard locking function.  This makes pccard devices like
Compact Flash cards work again.

PR:             kern/72805
Submitted by:   James E. Flemer <jflemer@alum.rpi.edu>
MFC in:         2 days
2004-10-19 10:29:00 +00:00
Søren Schmidt
6192895db8 Fix the PC98 lockups on boot.
The interchannel locking for PC98 needed to be updated to match the
rest of the locking in ATA.
2004-10-06 19:46:08 +00:00
Warner Losh
2e31e339d1 Fix disordering of pccarddevs.h noticed by bde. Also remove a few
redundant includes and fix some of the include disordering.

Submitted by: bde
2004-05-27 03:49:45 +00:00
Warner Losh
dba6dd177b Move to generating pccarddevs.h on the fly, both for the kernel and
the modules.

Also generate usbdevs.h automatically now, but a non-kernel file is
stopping that at the moment.
2004-05-26 00:53:10 +00:00
Søren Schmidt
f2972d7eb8 Add support for the Promise command sequencer present on all modern Promise
controllers (PDC203** PDC206**).

This also adds preliminary support for the Promise SX4/SX4000 but *only*
as a "normal" Promise ATA controller (ATA RAID's are supported though
but only RAID0, RAID1 and RAID0+1).

This cuts off yet another 5-8% of the command overhead on promise controllers,
making them the fastest we have ever had support for.

Work is now continuing to add support for this in ATA RAID, to accellerate
ATA RAID quite a bit on these controllers, and especially the SX4/SX4000
series as they have quite a few tricks in there..

This commit also adds a few fixes to the SATA code needed for proper support.
2004-04-13 09:44:20 +00:00
Søren Schmidt
5df3ca789c Use UMA instead of plain malloc for getting ATA request storage.
This gives +10% performance on simple tests, so definitly worth it.
A few percent more could be had by not using M_ZERO'd alloc's, but
we then need to clear fields all over the place to be safe, and
that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
Søren Schmidt
a7a120f649 Overhaul of the timeout/reinit framework. This should clear up most
of the leftovers from the old version that really doesn't work anymore.

Add a reset function for host-end of the ATA channel. This is needed
for the SiI3112 in order to whack it back to reality if a device
locks up the SATA interface (thereby preventing that we can reset the
device). The result is that ATA now recovers from the timeouts that
happens with the SiI3112A and more or less all disks based on old
PATA electronics with a Marvell PATA->SATA converter. This includes
lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
Søren Schmidt
ccd50c4818 Fix ata-card.
The altio resource magic no longer worked probably due to other changes
in the kernel. Redo that part so it also fits better into ATAng.
Fix detach so it doesn't panic the system when a pccard device is
yanked.

Approved by: re@
2003-11-30 16:27:59 +00:00
Warner Losh
d25d7d01be Include pccard/pccard_cis.h here too 2003-10-07 04:26:14 +00:00
Søren Schmidt
9f06a4277f Unify prototypes.
Cosmetics.
2003-08-25 09:01:49 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Søren Schmidt
5fdbb0d222 This is a major rework of the ATA driver (ATAng)
Restructure the way ATA/ATAPI commands are processed, use a common
ata_request structure for both. This centralises the way requests
are handled so locking is much easier to handle.

The driver is now layered much more cleanly to seperate the lowlevel
HW access so it can be tailored to specific controllers without touching
the upper layers. This is needed to support some of the newer
semi-intelligent ATA controllers showing up.

The top level drivers (disk, ATAPI devices) are more or less still
the same with just corrections to use the new interface.

Pull ATA out from under Gaint now that locking can be done in a sane way.

Add support for a the National Geode SC1100. Thanks to Soekris engineering
for sponsoring a Soekris 4801 to make this support.

Fixed alot of small bugs in the chipset code for various chips now
we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
Warner Losh
60c64b939b Remove check to see if the get resource for the second resource
succeeds.  There is a difference between how OLDCARD and NEWCARD deal
with their resources, and this code exposes that difference.  I'm not
sure which behavior is correct, and will need to look into that in
more detail.  However, it appears that we go ahead and allocate the
right thing in both cases that I have access to (CF cards, CDROM, and
external ata enclosures), so go ahead and ignore the failure to get
the resource for the other rid.  There's already another check to make
sure that the actual allocation works correctly, and that should be
sufficient to catch cases that don't work.

Submitted by: wpaul and iedowse
2003-06-27 03:25:43 +00:00
Warner Losh
04fd143fa8 Add FREECOM PCCARD-IDE to the mix. It doesn't have a manufacturer or
product ID, so we have to use the CIS strings to ID it.

dmesg by: Christian Laursen
2003-06-17 12:33:53 +00:00
Warner Losh
49d5015da8 Add support for generic PMCICA ATA CARD 2003-06-03 01:30:55 +00:00
Poul-Henning Kamp
df1970aa55 Fix an off-by-1 error.
Found by:	FlexeLint
Reviewed by:	sos
Approved by:	re/rwatson
2003-05-12 15:26:05 +00:00
Warner Losh
03988eea4d MF-p4:
"Ian gave me this patch"  I assume this is iadowse@.

Also, pull in a few devices NetBSD's table.  More are there, but I need
to properly move them to pccarddev before including them here.
2003-04-26 22:19:02 +00:00
Søren Schmidt
566cf07a7c Second round of updates to the ATA driver.
Clean up the DMA interface too much unneeded stuff crept in with
the busdma code back when.

Modify the ATA_IN* / ATA_OUT* macros so that resource and offset
are gotten from a table. That allows for new chipsets that doesn't
nessesarily have things ordered the good old way. This also removes
the need for the wierd PC98 resource functions.

Tested on: i386, PC98, Alpha, Sparc64
2003-03-29 13:37:09 +00:00
Søren Schmidt
c55607ce1f Always set the setmode funcptr. 2003-03-03 11:15:32 +00:00
Søren Schmidt
bb5bdd386e First round off updates/fixes to the ATA driver.
This moves all chipset specific code to a new file 'ata-chipset.c'.
Extensive use of tables and pointers to avoid having the same switch
on chipset type in several places, and to allow substituting various
functions for different HW arch needs.
Added PIO mode setup and all DMA modes.
Support for all known SiS chipsets. Thanks to Christoph Kukulies for
sponsoring a nice ASUS P4S8X SiS648 based board for this work!

Tested on:	i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
Søren Schmidt
9dec0f3de0 Fix linking problem when atadisk is not use in ata-all.c
Add dummy intr_func and lock_func to ata-card.c

Dont call ad_print if the driver decided there is no disk.
2002-12-06 19:29:53 +00:00
Poul-Henning Kamp
c6ff03e2df Remove unused #includes: <sys/disk.h> <sys/devicestat.h> and <sys/sysctl.h>
Sponsored by:	DARPA & NAI Labs.
Approved by:	sos
2002-09-20 18:08:57 +00:00
Poul-Henning Kamp
2f11d560cc remove #includes of <sys/bio.h> where not needed. 2002-09-14 18:59:32 +00:00
Søren Schmidt
6ddce9039b Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.

A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.

Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.

Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.

Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.

If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.

Misc fixes that I had lying around for various minor bugs.

Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
Søren Schmidt
d2e812582d Add support for pccard.
submitted by: imp
2002-01-28 13:12:16 +00:00
Søren Schmidt
f601b4eb7c Overhaul to minimize stack usage, in some places >2K was used
on the stack *blush*...
2001-09-20 15:25:36 +00:00
Søren Schmidt
331c488d69 Split out the ata probes in seperate files for each bus type. 2001-03-06 21:43:46 +00:00