Commit Graph

64 Commits

Author SHA1 Message Date
Max Laier
02b199f158 Link ALTQ to the build and break with ABI for struct ifnet. Please recompile
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.

__FreeBSD_version bump will follow.

Tested-by:	(i386)LINT
2004-06-13 17:29:10 +00:00
Poul-Henning Kamp
41ee9f1c69 Add some missing <sys/module.h> includes which are masked by the
one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
Andre Oppermann
ba99a9b120 Link state change notification of ethernet media to the routing socket.
o The ieee80211_media_status() function updates the ifi_link_state field
  and calls rt_ifmsg() to notify listeners on the routing socket.

Approved by:	sam
2004-05-05 15:48:06 +00:00
Sam Leffler
fb8e945823 Resolve the issue of whether frames have FCS or not. Frame data does not
include FCS; if you want to provide it you can put it in the header.

Submitted by:	David Young
2004-04-05 22:13:21 +00:00
Sam Leffler
3055cc14c4 eliminate nested include by making MALLOC_DECLARE conditional on the
inclusion of <sys/malloc.h>

Submitted by:	bde
2004-04-05 22:10:26 +00:00
Sam Leffler
f3fc4ae54b add definitions for WME, WPA (and WPA2), and miscellaneous other stuff
that's coming soon

Obtained from:	madwifi
2004-04-05 17:47:40 +00:00
Sam Leffler
566a65385f export the malloc type M_80211_NODE for drivers that override the node
allocation routines
2004-04-05 04:17:03 +00:00
Sam Leffler
32346d607a make malloc tag for ieee80211_node more recognizable 2004-04-05 04:15:55 +00:00
Sam Leffler
36c6538b7f Change handling of probe response frames. Previously we always dropped the
refcnt on the node but left it in the node table.  This allows the node table
to hold the results of scanned ap's but for ibss scans left nodes w/o any
driver-private state setup and/or a bad refcnt (when the nodes were timed
out they were prematurely discarded).  Now we treat nodes identified for ap
scanning as before but force nodes discovered when scanning for ibss neighbors
to have complete/proper state and hold the refcnt on the node.  Any other
nodes created because of these frames are discarded directly (need to optimize
this case to eliminate various work that's immediately discarded).
2004-04-02 23:35:24 +00:00
Sam Leffler
750d6d0c60 fix adhoc/ibss operation for drivers that require host support (e.g. ath):
o remove IEEE80211_C_RCVMGT capability
o on transmit craft new nodes as needed using new ieee80211_find_txnode routine
o add ieee80211_find_txnode routine to lookup a node by mac address and
  if not present create one when operating in ibss/ahdemo mode; new nodes
  are dup'd from bss and the driver is told to treat the node as if a new
  association has been created so driver-private state (e.g. rate control
  handling) is setup

Obtained from:	netbsd (basic idea)
2004-04-02 23:25:39 +00:00
Sam Leffler
6f3f5a1170 always free node reference when processing a probe request frame; was
conditionally doing an unref if operating in adhoc mode which turns
out to be wrong
2004-04-02 23:12:45 +00:00
Sam Leffler
694dca643b o change ieee80211_dup_bss to inherit explicit data from ic_bss instead of
blindy copying the node contents; this turns out to be a bad idea as we
  add more state in the node for things like WPA
o track node allocation failures in ieee80211_dup_bss instead of the callers

Obtained from:	madwifi
2004-04-02 23:09:24 +00:00
Sam Leffler
c64bfa0f8f track node allocation failure stats in ieee80211_alloc_node instead
of each caller

Obtained from:	madwifi
2004-04-02 23:06:41 +00:00
Sam Leffler
410ca74bb8 replace explicit malloc/free with MALLOC/FREE for portability
Obtained from:	madwifi
2004-04-02 23:02:24 +00:00
Sam Leffler
b4c5a90fee extract node matching logic into new ieee80211_match_bss routine for use
in background/incremental scanning

Obtained from:	madwifi
2004-04-02 23:00:30 +00:00
Sam Leffler
849b898054 diff reduction against madwifi 2004-04-02 22:56:09 +00:00
Sam Leffler
a6381c54bb when processing beacon/probe response frames capture "is probe" in a
variable to improve code legibility since we're going to use it more
in forthcoming mods

Obtained from:	madwifi
2004-04-02 22:54:07 +00:00
Sam Leffler
4bd067c5a1 add a case of IEEE80211_ELEMID_IBSSPARMS so the statistic on unknown
elements is more meaningful (will add more with WPA merge)

Obtained from:	madwifi
2004-04-02 22:50:31 +00:00
Sam Leffler
7aa402898f when doing internal bridging free the node instead of just dropping the
reference for consistency (explicit refcounting is discouraged)

Obtained from:	madwifi
2004-04-02 22:48:52 +00:00
Sam Leffler
9089c48c13 when receiving a frame w/ a bad version number don't unref the node; the
driver is responsible for that

Obtained from:	madwifi
2004-04-02 22:47:11 +00:00
Sam Leffler
fce2da8b66 insure basic rate bit is set in derived rate set; this
works around a protocol/firmware problem with some versions found
in hermes/prism cards
2004-04-02 20:22:25 +00:00
Sam Leffler
63beab8306 diff reduction against madwifi/p4 2004-04-02 20:19:20 +00:00
Sam Leffler
2e79ca9762 o add support for controlling the power of transmitted frames
o add support for controlling the 11g protection mechanism used
  to protect OFDM frames in a mixed 11b/g network

Reviewed by:	imp
2004-03-30 22:57:57 +00:00
Sam Leffler
b2e9569143 Only call if_init when doing SIOCSIFADDR if the interface is not marked
up (IFF_UP).  This eliminates extraneous AP scanning.

Reviewed by:	imp
2004-03-30 22:53:52 +00:00
Maxime Henrion
45c7aff75a Add explicit dependency on "ether", since we use ether_ifattach(). 2004-03-16 19:25:55 +00:00
Atsushi Onoe
e249fdbedb Change WI_RID_SCAN_RES compatibility interface to return the result after
active scan is completed just as WI_RID_READ_APS.
This fixes wicontrol -L for ath(4) and awi(4) to have results even if
the driver cannot associate any APs.
2004-01-19 05:25:43 +00:00
Atsushi Onoe
4844aa7d12 Add support for FH phy, which will be used by awi driver.
Also some if_media constants to indicate operational mode are changed
to bitmasks to reduce diffs from NetBSD.
2004-01-15 08:44:27 +00:00
Sam Leffler
6f161f0342 Handle SIOCSIFMTU ioctl directly so we can apply 802.11-specific bounds.
Note that the min is actually constrained to IF_MINMTU by the if layer.
2004-01-13 06:22:55 +00:00
Sam Leffler
c6b688c403 Sync with netbsd:
o #ifdef _KERNEL the fallback definition for DLT_IEEE802_11_RADIO
o fix many comments
o rename antenna stuff and fix units/reference signal
o change IEEE80211_RADIOTAP_DBM_TX_POWER from unsigned 16-bit value
  to a signed 8-bit value
o change IEEE80211_RADIOTAP_FLAGS from 16 bits to 8 bits to simplify
  padding requirements
o drop IEEE80211_RADIOTAP_TIME
o change IEEE80211_RADIOTAP_ANTENNA from 16 bits to 8 bits
o drop IEEE80211_RADIOTAP_PAD
o add channel flag definitions for outside the kernel so radiotap
  doesn't depend on stuff in ieee80211*.h

Obtained from:	NetBSD
2003-12-28 06:57:28 +00:00
Sam Leffler
93685685f4 o insure the current channel is in a good state before starting an AP scan
o reject scan requests for a device that isn't marked up

This fixes a problem where requesting a scan before marking the device
up would cause a panic because the current channel was set to "any" (0xffff).
2003-11-13 05:23:58 +00:00
Sam Leffler
bca1062ba5 fix typo that broke AP scanning by BSSID
Submitted by:	Len Widra
2003-11-09 23:36:46 +00:00
Brian Feldman
5c8bb90bf7 Fix a reversed suser(9) in SIOCG80211:IEEE80211_IOC_WEPKEY which prevents
root from reading the wireless card's WEP keys, but allows non-root.
2003-11-05 04:16:48 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Sam Leffler
59571d2ba6 fix station mode breakage (repeat after me: "test every change, no
matter how small...")
2003-10-17 23:59:11 +00:00
Sam Leffler
1be50176db add statistics for all failures and/or abnormal events; still need
to add per-node statistics
2003-10-17 23:15:30 +00:00
Sam Leffler
627200f847 fixup debug msgs 2003-10-17 22:15:26 +00:00
Sam Leffler
b83d21129e include FH/DS parameters element in probe response frames 2003-10-17 22:09:20 +00:00
Sam Leffler
8b92bf47b0 correct comment 2003-10-17 21:56:42 +00:00
Sam Leffler
7f7ecba47e o add capability to indicate if device receives all management frames
o use recv mgmt capability to decide if outbound frames should be
  discarded if no node table entry is present
2003-10-17 21:54:59 +00:00
Sam Leffler
1e343b38be parameterize locking to improve portability and possible
change to different locking strategies
2003-10-17 21:41:52 +00:00
Sam Leffler
303ebc3c87 Try yet again to deal with timing out nodes. We cannot hold the
node lock while sending a management frame as this will potentially
result in a LOR with a driver lock.  This doesn't happen for the
Atheros driver but does for the wi driver.  Use a generation number
to help process each node once when scanning the node table and
drop the node lock if we need to timeout a node and send a frame.
2003-09-26 17:00:44 +00:00
Sam Leffler
ef39d4be37 Correct rate set negotiation when operating as a station: if the
AP has basic rates that we do not support then ignore them instead
of marking the rate set in error.

This fixes an 11b station associating with an 11g/b AP.
2003-09-26 16:54:55 +00:00
Sam Leffler
37c150c4a6 allocate node table entries with a specific malloc type 2003-09-26 16:52:12 +00:00
Sam Leffler
13604e6bad correct spelling of IEEE80211_IOC_RTSTHRESHOLD 2003-09-26 16:48:39 +00:00
Sam Leffler
d1e61976a0 Generalize the per-node RSSI data so drivers can do more interesting
things than record a single value.

o add a per-node method for returning the "current RSSI" for a node
o create a default method that returns ni_rssi which is the rssi for
  the last received frame
o use the per-node "get rssi" method to return data for the RID's
  submitted by wicontrol, et. al.

Loosely based on work by Tom Marshall <tommy@home.tig-grr.com> for MADWIFI.
2003-09-15 22:28:07 +00:00
Sam Leffler
18f897abe0 Change input handling to not expect drivers to filter short frames.
In particular, let drivers send up control frames so we can dispatch
them to bpf in monitor mode.

This is the first (small) step to adding more functionality such as
power save mode.
2003-09-15 19:38:29 +00:00
Sam Leffler
993338b6ab add definitions for various control frames and a minimum-sized frame that
we use to define IEEE80211_MIN_LEN; the minimal length for frames drivers
may pass up into the 802.11 layer
2003-09-15 19:36:34 +00:00
Sam Leffler
4f2e09c4b2 Honor the short preamble capability/state flag when calculating the
capabilities for outbound management frames.  But beware of sending
this when operating on 5GHz channels; some 11a AP's reject association
requests if this bit is set in the capabilities listed.

Obtained from:	MADWIFI (with modifications)
2003-09-14 22:34:24 +00:00
Sam Leffler
fba3db9f57 short preamble capability is not just for 11g; mark IEEE80211_F_SHPREAMBLE
regardless of the operating mode

Obtained from:	MADWIFI
2003-09-14 22:32:18 +00:00
Sam Leffler
95a22a9a71 Experimental bpf capture format for 802.11 devices. The link layer
type belongs in net/bpf.h but we keep it here for the moment.

P:
Submittep by:
Obtained from:	David Young <dyoung@pobox.com>
2003-09-05 22:19:32 +00:00