in busdma tags. There are currently no tags shared accross
different drivers so this isn't needed at the moment, but it
will be required when we'll have a proper newbus method to get
the parent busdma tag.
are machine dependent because they are not required to update the tlb when
mappings are added or removed, and doing so is machine dependent.
In addition, an implementation may require that pages mapped with pmap_kenter
have a backing vm_page_t, which is not necessarily true of all physical
pages, and so may choose to pass the vm_page_t to pmap_kenter instead of the
physical address in order to make this requirement clear.
in geom_disk.c.
As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
not save (restore) the global pointer (GP) in the jmpbuf in setjmp
(longjmp) because it's not needed in general. GP is considered a
scratch register at callsites and hence is always restored after a
call (when it's possible that the call resolves to a symbol in a
different loadmodule; otherwise GP does not have to be saved and
restored at all), including calls to setjmp/longjmp. There's just
one problem with this now that we use setjmp/longjmp for context
switching: A new context must have GP defined properly for the
thread's entry point. This means that we need to put GP in the
jmpbuf and consequently that we have to restore is in longjmp.
This automaticly requires us to save it as well.
When setjmp/longjmp isn't used for context switching, this can be
reverted again.
the J_SIG0 field. While here, rename J_SIG0 to J_SIGSET and
remove J_SIG1. The main reason for this change is that the
128-bit sigset_t is now aligned on a 16-byte boundary, which
allows us to use 16-byte atomic loads and stores on CPUs that
support it. The removal of J_SIG1 is done to avoid confusion:
it is never accessed and should not be. Renaming J_SIG0 to
J_SIGSET is the icing on the cake that's better done now than
later.
branches:
Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.
This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.
Approved by: re(scottl)
- Get rid of the useless atop() / pmap_phys_address() detour. The
device mmap handlers must now give back the physical address
without atop()'ing it.
- Don't borrow the physical address of the mapping in the returned
int. Now we properly pass a vm_offset_t * and expect it to be
filled by the mmap handler when the mapping was successful. The
mmap handler must now return 0 when successful, any other value
is considered as an error. Previously, returning -1 was the only
way to fail. This change thus accidentally fixes some devices
which were bogusly returning errno constants which would have been
considered as addresses by the device pager.
- Garbage collect the poorly named pmap_phys_address() now that it's
no longer used.
- Convert all the d_mmap_t consumers to the new API.
I'm still not sure wheter we need a __FreeBSD_version bump for this,
since and we didn't guarantee API/ABI stability until 5.1-RELEASE.
Discussed with: alc, phk, jake
Reviewed by: peter
Compile-tested on: LINT (i386), GENERIC (alpha and sparc64)
Runtime-tested on: i386
dev_t to the method functions.
The dev_t can still be found at struct consdev *->cn_dev.
Add a void *cn_arg element to struct consdev which the drivers can use
for retrieving their softc.
I was in two minds as to where to put them in the first case..
I should have listenned to the other mind.
Submitted by: parts by davidxu@
Reviewed by: jeff@ mini@
is already in pages, so we should not convert from bytes to pages.
The result of this bug was bad scaling of the VHPT relative to the
available memory.
Submitted by: Arun Sharma <arun@sharma-home.net>
o Add a MD header private to libc called _fpmath.h; this header
contains bitfield layouts of MD floating-point types.
o Add a MI header private to libc called fpmath.h; this header
contains bitfield layouts of MI floating-point types.
o Add private libc variables to lib/libc/$arch/gen/infinity.c for
storing NaN values.
o Add __double_t and __float_t to <machine/_types.h>, and provide
double_t and float_t typedefs in <math.h>.
o Add some C99 manifest constants (FP_ILOGB0, FP_ILOGBNAN, HUGE_VALF,
HUGE_VALL, INFINITY, NAN, and return values for fpclassify()) to
<math.h> and others (FLT_EVAL_METHOD, DECIMAL_DIG) to <float.h> via
<machine/float.h>.
o Add C99 macro fpclassify() which calls __fpclassify{d,f,l}() based
on the size of its argument. __fpclassifyl() is never called on
alpha because (sizeof(long double) == sizeof(double)), which is good
since __fpclassifyl() can't deal with such a small `long double'.
This was developed by David Schultz and myself with input from bde and
fenner.
PR: 23103
Submitted by: David Schultz <dschultz@uclink.Berkeley.EDU>
(significant portions)
Reviewed by: bde, fenner (earlier versions)
uio segment is empty. In this case no dma segment is create by
bus_dmamap_load_buffer, but the calling routine clears the first flag.
Under certain combinations of addresses of the first and second mbuf/uio
buffer this leads to corrupted DMA segment descriptors. This was already
fixed by tmm in sparc64/sparc64/iommu.c.
PR: kern/47733
Reviewed by: sam
Approved by: jake (mentor)
statclock based on profhz when profiling is enabled MD, since most platforms
don't use this anyway. This removes the need for statclock_process, whose
only purpose was to subdivide profhz, and gets the profiling clock running
outside of sched_lock on platforms that implement suswintr.
Also changed the interface for starting and stopping the profiling clock to
do just that, instead of changing the rate of statclock, since they can now
be separate.
Reviewed by: jhb, tmm
Tested on: i386, sparc64
likely not present under the simulator. If multiple partitions are
present on the virtual disk, then the 'a' partition would be the
most logical choice. Nowadays partitions are GPT based, which would
make the assumption of a disklabel even more questionable. Given
all the possible scenarios, assuming a raw "device" seems best.
saving and restoring ia32 specific registers when switching
context and ia32 support has not been compiled-in. The primary
reason for this change is that one of the ia32 registers (ar.fcr)
is wrongly marked as invalid by the simulator. Now that we avoid
using the register when possible, usability is improved. The
secundary reason is that it saves us 7 loads and stores.
Note that the PCB will continue to have room for these registers,
irrespective of the IA32 option. There are no benefits that make
it worthwhile.
and instead add platform, firmware and EFI stubs to the loader.
The net effect of this change is that besides a special console and
disk driver, the kernel has no knowledge of the simulator. This has
the following advantages:
o Simulator support is much harder to break,
o It's easier to make use of more feature complete simulators.
This would only need a change in the simulator specific loader,
o Running SMP kernels within the simulator. Note that ski at this
time does not simulate IPIs, so there's no way to start APs.
The platform, firmware and EFI stubs describe the following hardware:
o 4 CPU Itanium,
o 128 MB RAM within the 4GB address space,
o 64 MB RAM above the 4GB address space.
NOTE: The stubs in the skiloader describe a machine that should in
parts be defined by the simulator. Things like processor interrupt
block and AP wakeup vector cannot be choosen at random because they
require interpretation by the simulator. Currently the simulator is
ignorant of this.
This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS
which is ignored by the simulator.
Tested with: ski (version 0.943 for linux)
I'm not convinced there is anything major wrong with the patch but
them's the rules..
I am using my "David's mentor" hat to revert this as he's
offline for a while.
I belive it got here by copy&paste and I see no signs in the source
code that BIO_DELETE was dealt with correctly and can only wonder
what kind of trouble this may have caused.
data structure called kse_upcall to manage UPCALL. All KSE binding
and loaning code are gone.
A thread owns an upcall can collect all completed syscall contexts in
its ksegrp, turn itself into UPCALL mode, and takes those contexts back
to userland. Any thread without upcall structure has to export their
contexts and exit at user boundary.
Any thread running in user mode owns an upcall structure, when it enters
kernel, if the kse mailbox's current thread pointer is not NULL, then
when the thread is blocked in kernel, a new UPCALL thread is created and
the upcall structure is transfered to the new UPCALL thread. if the kse
mailbox's current thread pointer is NULL, then when a thread is blocked
in kernel, no UPCALL thread will be created.
Each upcall always has an owner thread. Userland can remove an upcall by
calling kse_exit, when all upcalls in ksegrp are removed, the group is
atomatically shutdown. An upcall owner thread also exits when process is
in exiting state. when an owner thread exits, the upcall it owns is also
removed.
KSE is a pure scheduler entity. it represents a virtual cpu. when a thread
is running, it always has a KSE associated with it. scheduler is free to
assign a KSE to thread according thread priority, if thread priority is changed,
KSE can be moved from one thread to another.
When a ksegrp is created, there is always N KSEs created in the group. the
N is the number of physical cpu in the current system. This makes it is
possible that even an userland UTS is single CPU safe, threads in kernel still
can execute on different cpu in parallel. Userland calls kse_create to add more
upcall structures into ksegrp to increase concurrent in userland itself, kernel
is not restricted by number of upcalls userland provides.
The code hasn't been tested under SMP by author due to lack of hardware.
Reviewed by: julian
indicate that uma_small_alloc should not. This code should be refactored so
that there is not so much cross arch duplication.
Reviewed by: jake
Spotted by: tmm
Tested on: alpha, sparc64
Pointy hat to: jeff and everyone who cut and pasted the bad code. :-)
metadata. This fixes module dependency resolution by the kernel linker on
sparc64, where the relocations for the metadata are different than on other
architectures; the relative offset is in the addend of an Elf_Rela record
instead of the original value of the location being patched.
Also fix printf formats in debug code.
Submitted by: Hartmut Brandt <brandt@fokus.gmd.de>
PR: 46732
Tested on: alpha (obrien), i386, sparc64
portable copy. Note that pmap_extract() must be used instead of
pmap_kextract().
This is precursor work to a reorganization of vmapbuf() to close remaining
user/kernel races (which can lead to a panic).
and declare them extern in interrupt.c. This eliminates the need
for ia64_add_sapic(), which is called from sapic.c.
While here, reformat ia64_enable() in interrupt.c to improve
indentation and add a sysctl (machdep.apic) to dump the I/O APIC
entries currently programmed into all I/O APICs. The latter can
help analyze interrupt problems.
Note that the sysctl is not intended as a userland (software)
interface. It may be changed in the future to include counters
so that vmstat -i can make use of it. It may also be removed...
copies of the reload. Note that we use the precomputed itm_reload value
so that we can avoid a division in the kernel. The ia64 cpu does not
have integer divide, so this would have been done by a floating point
operation.
CLOCK_VECTOR and define it as 254, not 255. Vector 255 is already
in use as the AP wakeup vector on the HP rx2600.
This needs to be made more dynamic. The likelyhood of vector 254
being in use is pretty small, but we already have code to assign
vectors to IPIs (see sal.c) and it's preobably better to have a
centralized "vector manager" that hands out vectors based on
some imput (like priority).
handleclock itself is trivial.
While here, replace (itc_frequency+hz/2)/hz with itm_reload for
consistency. There's now a single place where we determine the
ITM reload value.
interrupt block). We use the previously hardcoded address as a
default only, but will otherwise use whatever ACPI tells us.
The address can be found in the MADT table header or in the
LAPIC override table entry.
space most of the time, but handles machines with lots of I/O
(S)APICs. We cannot make this more dynamic without breaking the
interface with vmstat. Hence, we need to fix the interface first.
name of unused entries from "intr XXX" to "#XXX". This makes it
easier to debug interrupt problems, because vmstat can be hacked
more easily to dump all interrupt entries that are in use and not
those that have had interrupts.
devices aren't necessarily mapped within 4GB. I/O port addresses
are offsets into the memory mapped I/O port space, which is not
larger than 16MB. No need to convert those to 64 bit types.
o Make the URL of the handbook match reality
o Improve some comments (either wording or formatting)
o Sync with i386: comment-out DDB, INVARIANTS, INVARIANT_SUPPORT
o Add some more SCSI/RAID controllers:
ahd, mpt, asr, ciss, dpt, iir, mly, ida
o Remove support for the parallel port
o Add NICs: em, bge
o Remove NICs: ste, tl, tx, vr, wb
o Enable USB support again, except of the UHCI host controller.
UHCI still hangs the BigSur (=HP i2000) machines, and makes
them useless. The OHCI controller works fine. Note that newer
ia64 boxes based on the Intel host controllers (UHCI or EHCI)
still won't have USB support. We really need to import the
EHCI host controller from NetBSD...
of the `machdep.acpi_root' sysctl. This is required on ia64
because the root pointer hardly ever, if at all, lives in the
first MB of memory and also because scanning the first MB of
memory can cause machine checks.
This provides a save and reliable way for ACPI tools to work
with the tables if ACPI support is present in the kernel. On
ia64 ACPI is non-optional.
end up with a dump offset that's smaller than the start of the
dump device and either clobber data in preceding partitions or
try to write beyond the end of the medium (unsigned wrap).
Implement legacy behaviour to never write to the first 64KB as
that is where metadata (ie disklabels) may reside.
The HCDP table is one (non-proprietary) way for the platform to
inform the OS about headless operation. This field would normally
hold the address as can be found by scanning the EFI system table,
which we also pass to the kernel. The apparent duplication allows
us to synthesize a HCDP table in the loader by whatever means we
can think of, including relocating the platform table into pre-
mapped address space. In short: it gives us more freedom.
Approved by: re (blanket)
of that, there's some nasty process corruption when running with
SMP.
Note that this was already in effect for the 5.0-RC1 kernels in
the form of a local patch.
Approved by: re (blanket)
Add function map_port_space() to map the memory mapped I/O port
range as uncacheable virtual memory and call it prior to probing
for a console. This removes the dependency on the loader to have
done this for us. Note that this change does not include doing
the same for APs.
Approved by: re (blanket)
the kernel itself, but SAL on Itanium2 machines spontaneously
rebooted the machine.
Approved by: re (blanket)
Submitted by: Arun Sharma <adsharma@unix-os.sc.intel.com>
i386 cpu_thread_exit(). This resulted in a panic with WITNESS
since we need to hold Giant to call kmem_free(), and we weren't
helding it anymore in cpu_thread_exit(). We now do this from a
new MD function, cpu_thread_dtor(), called by thread_dtor().
Approved by: re@
Suggested by: jhb
- Clear the PG_WRITEABLE flag in pmap_page_protect() if write access is
being removed. Return immediately if write access is being removed and
PG_WRITEABLE is already clear.
Previously these were libc functions but were requested to
be made into system calls for atomicity and to coalesce what
might be two entrances into the kernel (signal mask setting
and floating point trap) into one.
A few style nits and comments from bde are also included.
Tested on alpha by: gallatin
to worry about ABI vs released systems yet. This is mostly transparent
since there is no significant exposure in the syscall interface. The
things that go wrong are mostly userland stuff - time(&intvariable).
Reviewed by: dfr, marcel
Approved by: re (jhb)
to reflect its new location, and add page queue and flag locking.
Notes: (1) alpha, i386, and ia64 had identical implementations
of pmap_collect() in terms of machine-independent interfaces;
(2) sparc64 doesn't require it; (3) powerpc had it as a TODO.
Don't force 16-byte alignment at run-time. Do it at compile-time.
This saves us the pointer fiddling by the setjmp functions and
reduces complexity. While here, increase the jmp_buf by 16 bytes
to an even 512 bytes. Coincidentally, due to the way alignment
was handled prior to this change, the jmp_buf has not changed in
size, but only in how the space is used. Prior to this change
the 16 bytes were reserved for enforcing alignment; now they are
reserved by us for future extensions.
Therefore, this ABI breaker is relatively save: the failure is
always an alignment trap.
sysctls to MI code; this reduces code duplication and makes all of them
available on sparc64, and the latter two on powerpc.
The semantics by the i386 and pc98 hw.availpages is slightly changed:
previously, holes between ranges of available pages would be included,
while they are excluded now. The new behaviour should be more correct
and brings i386 in line with the other architectures.
Move physmem to vm/vm_init.c, where this variable is used in MI code.
not look like the prerequisites to fill it in properly will be in the tree
for the upcoming release, but it's mostly done, so there is no need for these
to stay around to remind us.
a true scratch register. This change and future re-allocations will
eventually result in code that we can unwind to to get the preserved
registers of the process. This of course means that we cannot trash
them while saving the process context.
While re-allocating, remove the register aliases. Abstraction is in
this case disadvanteous.
have f16-f31 as part of the context. The PCB has been reorganized to
better match how we save and restore the (preserved) registers. This
commit also moves the context restoriation to its own function (named
pcb_restore), as we did with pcb_save.
Only minimal effort has been put in writing optimal assembly. The
expectation is that there will be more rounds of changes.
from all low-level bus space support functions. There's no need
to actually force the read/write to be accepted by the platform
before we can do anything else. We still have the mf instruction
there, which forces ordering. This too is not required given the
semantices of the bus space I/O functions, but it's not at all
clear to me if there are any poorly written device drivers that
depend on the strict ordering by the processor. The motto here is
to take small steps...
o Properly set the pointer to the counter for each interrupt and
update the intrnames table.
o Remove Alpha cruft from intrcnt.h.
o Create INTRNAME_LEN as the single entity that defines the width
of the names in the intrnames table (incl. terminatinf '\0').
This guarantees that loads and stores emitted before the fence are
made visible before the IPI becomes pended.
Remove the mf.a instruction after initiating the IPI. There's no
guarantee that the IPI becomes pended prior to subsequent reads or
writes. Even if there was a guarantee, it would mostly be without
any benefit.
handling clean and functional as 5.x evolves. This allows some of the
nasty bandaids in the 5.x codepaths to be unwound.
Encapsulate 4.x signal handling under COMPAT_FREEBSD4 (there is an
anti-foot-shooting measure in place, 5.x folks need this for a while) and
finish encapsulating the older stuff under COMPAT_43. Since the ancient
stuff is required on alpha (longjmp(3) passes a 'struct osigcontext *'
to the current sigreturn(2), instead of the 'ucontext_t *' that sigreturn
is supposed to take), add a compile time check to prevent foot shooting
there too. Add uniform COMPAT_43 stubs for ia64/sparc64/powerpc.
Tested on: i386, alpha, ia64. Compiled on sparc64 (a few days ago).
Approved by: re
so that there is ony one copy of it. Fix that one copy
so that KSEs with no mailbox in a KSE program are not a cause
of page faults (this can legitmatly happen).
Submitted by: (parts) davidxu
pointer to a dumperinfo instead of di. A brainfart, surely. This
bug went unnoticed for all this time because the pointer is only
used by buf_write() when it can write a completely filled buffer
to the dump device. This depends on the number of memory chunks
that needs to be dumped. This has apparently been low enough that
it has never happened up until this point.
for defining vectors. As a result, each vector will be a global
function with unwind directives to notify the unwinder that we're
in an interrupt handler. In the debugger this will show up something
like:
Debugger(0xe000000000a211d8, 0xe000000000748960) at Debugger+0x31
panic(0xe000000000a36858, 0xe0000000021d32d0, 0xe000000000ae42e8, ...
trap(0x14, 0x100000, 0xe0000000021d32d0, 0x0, 0xa0000000002095f0, ...
ivt_Data_TLB(0x14, 0x100000, 0xe0000000021d32d0) at ivt_Data_TLB+0x1f0
This is for the not-quite-ready signal/fpu abi stuff. It may not see
the light of day, but I'm certainly not going to be able to validate it
when getting shot in the foot due to syscall number conflicts.
execve_secure() system call, which permits a process to pass in a label
for a label change during exec. This permits SELinux to change the
label for the resulting exec without a race following a manual label
change on the process. Because this interface uses our general purpose
MAC label abstraction, we call it execve_mac(), and wrap our port of
SELinux's execve_secure() around it with appropriate sid mappings.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
by using the linker hooks. Since these hooks are called for the
kernel as well, we don't need to deal with that with a special
SYSINIT. The initialization implicitly performed on the first
update of the unwind information is made explicit with a SYSINIT.
We now don't need the _ia64_unwind_{start|end} symbols.
The primary reason for this is to allow MD code to process machine
specific attributes, segments or sections in the ELF file and
update machine specific state accordingly. An immediate use of this
is in the ia64 port where unwind information is updated to allow
debugging and tracing in/across modules. Note that this commit
does not add the functionality to the ia64 port. See revision 1.9
of ia64/ia64/elf_machdep.c.
Validated on: alpha, i386, ia64
ACL configuration changes, this shouldn't result in different code paths
for file systems not explicitly configured for ACLs by the system
administrator. For UFS1, administrators must still recompile their
kernel to add support for extended attributes; for UFS2, it's sufficient
to enable ACLs using tunefs or at mount-time (tunefs preferred for
reliability reasons). UFS2, for a variety of reasons, including
performance and reliability, is the preferred file system for use with
ACLs.
Approved by: re
were improperly relocated due to faulty logic in lookup_fdesc()
in elf_machdep.c. The symbol index (symidx) was bogusly used for
load modules other than the one the relocation applied to. This
resulted in bogus bindings and consequently runtime failures.
The fix is to use the symbol index only for the module being
relocated and to use the symbol name for look-ups in the
modules in the dependent list. As such, we need a function to
return the symbol name given the linker file and symbol index.
the predicate registers. Even though the ITLB and DTLB interrupts
happen often enough, this bug didn't do much harm. The reason
is that the interrupt handlers only modify p1 and since this is
a preserved (callee-saved) register it is hardly used in code
generated by the compiler. Compilers use scratch registers by
default. Changing the interrupt handlers to use p6 (ie a scratch
register) proved that the bug was in fact fatal.
o Replace KSTACK_PAGES with pages on panic() in pmap_new_thread(),
o Fix style bugs in adjacent code,
o Use NULL instead of 0 for pointers,
o Save the virtual kstack address if we create an alternate
kstack because 1) we can derive the physical (RR7) address
from it and 2) we need the virtual address for contigfree()
in pmap_dispose_thread(). Thus td_altkstack saves
td_md.md_kstackvirt.
as a trivial function that only calls ia64_tpa() and hence requires
the prototype of ia64_tpa(), but by defining pmap_kextract as
ia64_tpa. This solves the inclusion ordering issue in ddb/db_watch.c
NB: But it will enable it in all kernels not having options "NO_GEOM"
Put the GEOM related options into the intended order.
Add "options NO_GEOM" to all kernel configs apart from NOTES.
In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.
There are currently three known issues which may force people to
need the NO_GEOM option:
boot0cfg/fdisk:
Tries to update the MBR while it is being used to control
slices. GEOM does not allow this as a direct operation.
SCSI floppy drives:
Appearantly the scsi-da driver return "EBUSY" if no media
is inserted. This is wrong, it should return ENXIO.
PC98:
It is unclear if GEOM correctly recognizes all variants of
PC98 disklabels. (Help Wanted! I have neither docs nor HW)
These issues are all being worked.
Sponsored by: DARPA & NAI Labs.
is partly based on the Alpha system which duplicates the clock to
each cpu, instead of doing a clock roundrobin like on i386. This means
we get hz * ncpu clocks per second and so we have to seperate clock
sampling from actual 'do the work' clock processing. The BSP runs the
complete processing, the rest just sample state etc.
Using the on-cpu interval timer is not ideal as it will drift. There
is more to be done here, we should use an external clock source.
expand to __attribute__((packed)) and __attribute__((aligned(x)))
respectively. Replace the handful of gcc-ism's that use
__attribute__((aligned(16))) etc around the kernel with __aligned(16).
There are over 400 __attribute__((packed)) to deal with, that can come
later. I just want to use __packed in new code rather than add more
gcc-ism's.
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)
If struct disklabel is the messenger: kill the messenger.
Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer). This commit changes this communication to use four
explicit fields instead.
Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.
Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.
The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.
This concludes (modulus any mistakes) the series of disklabel related
commits.
I belive it all amounts to a NOP for all the rest of you :-)
Sponsored by: DARPA & NAI Labs.
function were put in i386/i386/machdep.c from where it has been
cut and pasted to other architectures with only minor corruption.
Disklabel is really a MI format in many ways, at least it certainly
is when you operate on struct disklabel.
Put bounds_check_with_label() back in subr_disklabel.c where it belongs.
Sponsored by: DARPA & NAI Labs.
MD function is just a wrapper around db_stack_trace_cmd() that prints out
a backtrace of curthread. Currently, this function is only implemented
on i386 and alpha (and the alpha version isn't quite tested yet, will do
that in a bit). Other changes:
- For i386, fix a bug in the raw frame address case. The eip we extract
from the passed in frame address does not match the frame we received.
Thus, instead of printing a bogus frame with the wrong eip, go ahead
and advance frame down to the same frame as the eip we are using.
- For alpha, attempt to add a way of doing a raw trace for alpha. Instead
of passing a frame address in 'addr', pass in a pointer to a structure
containing PC and KSP and use those to start the backtrace. The alpha
db_print_backtrace() uses asm to read in the current PC and KSP values
into such a request.
Tested on: i386
Requested by: many
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)
While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.
to userland in the signal handler that were not being iflled out before, but
should and can be.
This part of sendsig could be slightly refactored to use an MI interface, or
ideally, *sendsig*() would have an API change to accept a siginfo_t, which
would be filled out by an MI function in the level above sendsig, and said MI
function would make a small call into MD code to fill out the MD parts (some
of which may be bogus, such as the si_addr stuff in some places). This would
eventually make it possible for parts of the kernel sending signals to set up
a siginfo with meaningful information.
Reviewed by: mux
MFC after: 2 weeks
sysentvec. Initialized all fields of all sysentvecs, which will allow
them to be used instead of constants in more places. Provided stack
fixup routines for emulations that previously used the default.
in the original hardwired sysctl implementation.
The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int. Use
'long' there.
Change Maxmem and physmem and related variables to 'long', mostly for
completeness. Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody. This
comes for free on 32 bit machines, so why not?
These types are unlikely to ever become very MD. They include:
clockid_t, ct_rune_t, fflags_t, intrmask_t, mbstate_t, off_t, pid_t,
rune_t, socklen_t, timer_t, wchar_t, and wint_t.
While moving them, make a few adjustments (submitted by bde):
o __ct_rune_t needs to be precisely `int', not necessarily __int32_t,
since the arg type of the ctype functions is int.
o __rune_t, __wchar_t and __wint_t inherit this via a typedef of
__ct_rune_t.
o Some minor wording changes in the comment blocks for ct_rune_t and
mbstate_t.
Submitted by: bde (partially)
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
macros, which are only MD because of gratuitous differences between
architectures.
o Change all headers to make use of this. This mainly involves
changing:
#ifdef _BSD_FOO_T_
typedef _BSD_FOO_T_ foo_t;
#undef _BSD_FOO_T_
#endif
to:
#ifndef _FOO_T_DECLARED
typedef __foo_t foo_t;
#define _FOO_T_DECLARED
#endif
Concept by: bde
Reviewed by: jake, obrien
make a series of modifications to the credential arguments relating
to file read and write operations to cliarfy which credential is
used for what:
- Change fo_read() and fo_write() to accept "active_cred" instead of
"cred", and change the semantics of consumers of fo_read() and
fo_write() to pass the active credential of the thread requesting
an operation rather than the cached file cred. The cached file
cred is still available in fo_read() and fo_write() consumers
via fp->f_cred. These changes largely in sys_generic.c.
For each implementation of fo_read() and fo_write(), update cred
usage to reflect this change and maintain current semantics:
- badfo_readwrite() unchanged
- kqueue_read/write() unchanged
pipe_read/write() now authorize MAC using active_cred rather
than td->td_ucred
- soo_read/write() unchanged
- vn_read/write() now authorize MAC using active_cred but
VOP_READ/WRITE() with fp->f_cred
Modify vn_rdwr() to accept two credential arguments instead of a
single credential: active_cred and file_cred. Use active_cred
for MAC authorization, and select a credential for use in
VOP_READ/WRITE() based on whether file_cred is NULL or not. If
file_cred is provided, authorize the VOP using that cred,
otherwise the active credential, matching current semantics.
Modify current vn_rdwr() consumers to pass a file_cred if used
in the context of a struct file, and to always pass active_cred.
When vn_rdwr() is used without a file_cred, pass NOCRED.
These changes should maintain current semantics for read/write,
but avoid a redundant passing of fp->f_cred, as well as making
it more clear what the origin of each credential is in file
descriptor read/write operations.
Follow-up commits will make similar changes to other file descriptor
operations, and modify the MAC framework to pass both credentials
to MAC policy modules so they can implement either semantic for
revocation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
<stdint.h>. Previously, parts were defined in <machine/ansi.h> and
<machine/limits.h>. This resulted in two problems:
(1) Defining macros in <machine/ansi.h> gets in the way of that
header only defining types.
(2) Defining C99 limits in <machine/limits.h> adds pollution to
<limits.h>.
handler in the kernel at the same time. Also, allow for the
exec_new_vmspace() code to build a different sized vmspace depending on
the executable environment. This is a big help for execing i386 binaries
on ia64. The ELF exec code grows the ability to map partial pages when
there is a page size difference, eg: emulating 4K pages on 8K or 16K
hardware pages.
Flesh out the i386 emulation support for ia64. At this point, the only
binary that I know of that fails is cvsup, because the cvsup runtime
tries to execute code in pages not marked executable.
Obtained from: dfr (mostly, many tweaks from me).
on the Itanium2 system I have when we use up *all* of the initial 256MB
direct mapped region before we are ready to dynamically expand it.
The machine that I have has 4 cpus and a very big hole in the middle.
This makes the bogus '(last_address - first_address) / PAGE_SIZE'
calculations especially dangerous and caused many millions of initial
PV/PTE's to be preallocated.
choosethread() in MI C code instead of doing it in in assembly in all the
various cpu_switch() functions. This fixes problems on ia64 and sparc64.
Reviewed by: julian, peter, benno
Tested on: i386, alpha, sparc64
hardly MD, since all our platforms share the same macro. It's not
really compiler dependent either, but this helps in reducing
<machine/ansi.h> to only type definitions.
threaded VM pagezero kthread outside of Giant. For some platforms, this
is really easy since it can just use the direct mapped region. For others,
IPI sending is involved or there are other issues, so grab Giant when
needed.
We still have preemption issues to deal with, but Alan Cox has an
interesting suggestion on how to minimize the problem on x86.
Use Luigi's hack for preserving the (lack of) priority.
Turn the idle zeroing back on since it can now actually do something useful
outside of Giant in many cases.
pmap_swapin_proc/pmap_swapout_proc functions from the MD pmap code
and use a single equivalent MI version. There are other cleanups
needed still.
While here, use the UMA zone hooks to keep a cache of preinitialized
proc structures handy, just like the thread system does. This eliminates
one dependency on 'struct proc' being persistent even after being freed.
There are some comments about things that can be factored out into
ctor/dtor functions if it is worth it. For now they are mostly just
doing statistics to get a feel of how it is working.
we just have to deal with the kstack when told to. We do not have a
UMA-managed cache for the proc struct and its associated upage yet. So,
go back to the old lazy mechanism. Note that if UMA destroys pages that
used to contain proc structures, we'll lose the corresponding upage
forever. (zones never did this - once a page was allocated, it stayed
attached to the proc zone forever)
The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)
Reviewed by: Almost everyone who counts
(at various times, peter, jhb, matt, alfred, mini, bernd,
and a cast of thousands)
NOTE: this is still Beta code, and contains lots of debugging stuff.
expect slight instability in signals..
obtained, when all other scheduling activity is suspended. This is needed
on sparc64 to deactivate the vmspace of the exiting process on all cpus.
Otherwise if another unrelated process gets the exact same vmspace structure
allocated to it (same address), its address space will not be activated
properly. This seems to fix some spontaneous signal 11 problems with smp
on sparc64.
implementations can provide a base zero ffs function if they wish.
This changes
#define RQB_FFS(mask) (ffs64(mask))
foo = RQB_FFS(mask) - 1;
to
#define RQB_FFS(mask) (ffs64(mask) - 1)
foo = RQB_FFS(mask);
On some platforms we can get the "- 1" for free, eg: those that use the
C code for ffs64().
Reviewed by: jake (in principle)
- ktrace no longer requires Giant so do ktrace syscall events before and
after acquiring and releasing Giant, respectively.
- For i386, ia32 syscalls on ia64, powerpc, and sparc64, get rid of the
goto bad hack and instead use the model on ia64 and alpha were we
skip the actual syscall invocation if error != 0. This fixes a bug
where if we the copyin() of the arguments failed for a syscall that
was not marked MP safe, we would try to release Giant when we had
not acquired it.
struct uuid defined in <sys/uuid.h>.
Use uuid/UUID instead of guid/GUID to emphasize that the
identifiers are DCE version 1 identifiers and also to avoid
inconsistencies as much a possible.
combining too much conditions and as such ended up with the
kernel map instead of the corresponding process map. While
here, remove code to allow access to the stackgap and restyle
slightly to improve readability.
This fix specifically fixes the procfs failure we're having
when reading the process map (cat /proc/curproc/map)
As a minor positive side-effect, code at -O0 is more optimal. As a
minor negative side-effect, certain boundary cases yield no better
code than non-boundary cases. For example, atomic_set_acq_32(p, 0)
does a useless logical OR with value 0. This was previously elimina-
ted as part of if/while optimizations. Non-boundary cases yield
identical code at -O1 and -O2.
