Also make sure that the renewal is never more than 1/2 * expiry and
rebind never more than 7/4 * renewal (the default values in the spec).
This should allow adjusting high values from the server as well as
making sure the values from the server make sense.
Renewal and rebind times will be adjusted down if the expiry time is set
very high in a server, not the other way around. This change just makes
sure the values keep making sense.
Describe (briefly) how to compile the filesystem into the kernel and
load as a module.
Reference cd9660(5) in mount(8) and mount_cd9660(8).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
it is preceded by \.
foo="I \"like\" C++"
gives the value 'I "like" C++' to the variable 'foo'. If a character
other than " follows the \, both the \ and that character are passed
through.
Differential Revision: https://reviews.freebsd.org/D6286
Sponsored by: Netflix
Since the state name is an optional argument, it often can conflict
with other options. To avoid ambiguity now the state name must be
prefixed with a colon.
Obtained from: Yandex LLC
MFC after: 2 week
Sponsored by: Yandex LLC
With the following in /etc/fstab:
/dev/gpt/swap.eli none swap sw,late 0 0
swap will not be enabled, with `swapon -aL' complaining:
swapon: Invalid option: late
This happens because swap_on_geli_args() which parses geli arguments
out of all mount options does not expect late or noauto among them.
Fix this by explicitly allowing these arguments.
Reviewed by: jilles
Approved by: jilles
MFC after: 2 weeks
Differential Revision: D9835
that they still work. These utilities have become out of sync with the
code in the kernel and need work to bring them back into shape.
Most people test on real systems or VMs on real networks.
Suggested by: glebius
that they still work. These utilities have become out of sync with the
code in the kernel and need work to bring them back into shape.
Most people test on real systems or VMs on real networks.
Sugested by: glebius
This ensures the storage isn't leaked when non-NULL and the function
returns early, prior to the `free(vendor)` later on in the function.
MFC after: 1 week
Reported by: Coverity
CID: 1007111-1007113
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: D9993
The memory stored by `lease` would have previously been leaked if an
unterminated lease declaration was found in an early-return code path.
MFC after: 1 week
Reported by: clang static analyzer, Coverity
CID: 1007114
Submitted by: Tom Rix <trix@juniper.net>
Sponsored by: Dell EMC Isilon; Juniper, Inc
Differential Revision: D9992
The netipsec headers are referenced via netipsec/..., not ./... .
Thus, assuming that the netipsec/... is nested under ${SRCTOP}/sys/netipsec
is wrong.
This tripped up some individuals building ^/head on systems pre-r314812.
MFC after: 1 week
Reported by: Roberto Rodriguez Jr <rob.rodz.jr9@gmail.com>
Sponsored by: Dell EMC Isilon
gpart(8) has functionality to change the label of an GPT partition.
This functionality works like it should, however, after a label change
the /dev/gpt/ entries remain unchanged. glabel(8) status output remains
unchanged. The change only takes effect after a reboot.
PR: 162690
Submitted by: sub.mesa@gmail, Ben RUBSON <ben.rubson@gmail.com>, ae
Reviewed by: allanjude, bapt, bcr
MFC after: 6 weeks.
Differential Revision: https://reviews.freebsd.org/D9935
- Note existence of -m option.
- Note that -s applies to rule keyword, only, by adding usage text
specifically for the `rule` and `ruleset` keywords.
Don't go into any further detail in usage(..) -- it's best that one
reads the manpage to get a better idea of how things work as there are
a number of different option-specific keywords and arguments, as well
as some rule grammar.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Currently are defined three scopes: global, ifnet, and pcb.
Generic security policies that IKE daemon can add via PF_KEY interface
or an administrator creates with setkey(8) utility have GLOBAL scope.
Such policies can be applied by the kernel to outgoing packets and checked
agains inbound packets after IPsec processing.
Security policies created by if_ipsec(4) interfaces have IFNET scope.
Such policies are applied to packets that are passed through if_ipsec(4)
interface.
And security policies created by application using setsockopt()
IP_IPSEC_POLICY option have PCB scope. Such policies are applied to
packets related to specific socket. Currently there is no way to list
PCB policies via setkey(8) utility.
Modify setkey(8) and libipsec(3) to be able distinguish the scope of
security policies in the `setkey -DP` listing. Add two optional flags:
'-t' to list only policies related to virtual *tunneling* interfaces,
i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL
scope. By default policies from all scopes are listed.
To implement this PF_KEY's sadb_x_policy structure was modified.
sadb_x_policy_reserved field is used to pass the policy scope from the
kernel to userland. SADB_SPDDUMP message extended to support filtering
by scope: sadb_msg_satype field is used to specify bit mask of requested
scopes.
For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy
is used to pass if_ipsec's interface if_index to the userland. For GLOBAL
policies sadb_x_policy_priority is used only to manage order of security
policies in the SPDB. For IFNET policies it is not used, so it can be used
to keep if_index.
After this change the output of `setkey -DP` now looks like:
# setkey -DPt
0.0.0.0/0[any] 0.0.0.0/0[any] any
in ipsec
esp/tunnel/87.250.242.144-87.250.242.145/unique:145
spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0
refcnt=1
# setkey -DPg
::/0 ::/0 icmp6 135,0
out none
spid=5 seq=1 pid=872 scope=global
refcnt=1
No objection from: #network
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9805
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Some APs broadcast WPS IE frames with totally broken data. Ifconfig's printwpsie()
loops through WPS frames printing the attributes out; if the frame's data is bad,
printwpsie() can end up looking at out-of-bounds addresses causing ifconfig to
bus error.
Thanks to Takashi Inoue at Nihon U for his efforts in debugging this.
PR: bin/217312
Submitted by: fbsd@opal.com
MFC after: 1 week
* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong -
this isn't freebsd specific anymore.
* Don't use a hard-coded number of chains in the ioctl header; now we can shuffle
MAX_CHAINS around so it can be used in the right spot.
* Extend the signal/noisefloor levels in the mimo stats struct to userland to include
the signal and noisefloor levels for each 20MHz slice of a 160MHz channel.
* Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels.
Tested:
* ath(4), STA mode
* iwn(4), STA mode
* local ath10k port, STA mode
TODO:
* 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it
at that point.
Note:
* This breaks the driver and ifconfig ABI; please recompile the kernel,
ifconfig and wpa_supplicant/hostapd.
Users can use the new generic argument, -Q task_attr, to specify a task
attribute (simple, ordered, head of queue, aca) for the commands issued.
The the default is simple, which works with all SCSI devices that support
tagged queueing.
This will mostly be useful for debugging target behavior in certain
situations.
You can try it out by compiling CTL with CTL_IO_DELAY turned on (in
sys/cam/ctl/ctl_io.h) and then do something like this with one of the CTL
LUNs:
ctladm delay 0:0 -l done -t 10
camcontrol tur da34 -v
And at then before the 10 second timer is up, in another terminal:
camcontrol inquiry da34 -Q ordered -v
The Inquiry should complete just after the TUR completes. Ordinarily
it would complete first because of the delay injection, but because the
task attribute is set to ordered in this case, CTL holds it up until the
previous command has completed.
sbin/camcontrol/camcontrol.c:
Add the new generic argument, -Q, which allows the user to specify
a SCSI task attribute. The user can specify task attributes by
name or numerically.
Add a new task_attr arguments to SCSI sub-functions.
sbin/camcontrol/attrib.c,
sbin/camcontrol/camcontrol.h,
sbin/camcontrol/fwdownload.c,
sbin/camcontrol/modeedit.c,
sbin/camcontrol/persist.c,
sbin/camcontrol/timestamp.c,
sbin/camcontrol/zone.c:
Add the new task_attr argument to SCSI sub-functions.
sbin/camcontrol/camcontrol.8:
Document the new -Q option, and add an example.
Sponsored by: Spectra Logic
MFC after: 1 week
meta-data, copy it into the softc structure.
When returning md(4) device details to the caller, include the file name in
any MD_PRELOAD type devices if it is set (first character is not NUL.)
In mdconfig, for "preload" type md(4) devices, if there is file config
available, print it in the file column of the output.
Reviewed by: brooks
Approved by: sjg (mentor)
MFC after: 1 month
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D9529
