Commit Graph

52 Commits

Author SHA1 Message Date
Sofian Brabez
61bfd86762 Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
Reviewed by:	cognet
Approved by:	cognet
2013-01-30 18:01:20 +00:00
Warner Losh
e89da24b3d Two refinements to the 3c1 support:
1) Flag it and only access that command on the 3c1
2) The TX PLL appears to power down when not in use, so we have to power
   it back up when we've been idle.  Do this at the start of ifstart.
   Otherwise we fall off the net.
2009-04-11 04:30:38 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Warner Losh
60d47f2c0a MFp4: Migrate from CARD_CIS_SCAN to pccard_cis_scan 2005-09-13 19:56:07 +00:00
Warner Losh
5af5f40c75 Upon relection, we shouldn't allow the tuple structs to be modified by
the functor, so make it a const pointer, and chase down the resulting
const-poisoning.

Approved by: re (scottl)
2005-07-01 15:52:50 +00:00
Warner Losh
880266e041 Minor cleanup of ep driver and pccard attachment:
o Grab the MAC address out of the CIS if the card has the special
  3Com 0x88 tuple.  Most 3Com cards don't have this tuple, but we
  prefer it to the eeprom since it only appears to be present when
  the eeprom doesn't have the info.  So far, I've only observed this
  on my 3C362 and 3C362B cards, but the NetBSD driver implies that
  the 3C362C also has this tuple, and that some 3C574 cards do too (none
  of mine do).  ep_pccard_mac was written after looking at the NetBSD
  code.
o Store the enet addr in the softc for this device, so we can use the
  overridden MAC to set the station address.
o Create a routine to set the station address and use it where we need it.
o setup the cmd shitfs and such before we call ep_alloc(), and remove
  setting up the cmd shift value there.  It initializes to 0, and those
  attachments that need to frob it do so before calling ep_alloc.
o Remove some obsolete comments
o No longer a need to export ep_get_macaddr, so make it static
o ep_alloc already grabs the EEPROM id, so we don't need to grab it again
  in ep_pccard_attach.
o eliminate unit, it isn't needed, fix some printfs to be device_printf
  instead.

# All my pccards except the 3C1 work now.  Didn't test ISA or cbus cards
# that I have: 3C509B-TP or 3C569B-J-TPO

Tested on: 3C589B, 3C589C, 3C589D, 3C589D-TP, 3C562, 3C562B/3C563B,
	3C562D/3C563D, 3CCFE574BT, 3CXEM556, 3CCSH572BT, 3C574-TX,
	3CCE589EC, 3CXE589EC, 3CCFEM556, 3C1
Approved by: re (scottl)
2005-07-01 04:23:32 +00:00
Warner Losh
cdcf928a55 Add a chipset field to the lookup. Use this chipset type to determine
which command to use to read the eeprom and which devices have an MII.
Simplify code by no longer using the OLDCARD compat rouintes (I don't
know if this breaks OLDCARD on pc98 or not, but OLDCARD on pc98 days
are numbered, I hope).  This also removes a number of kludges that we
had before because they are OBE.  Add a convenience routine to lookup
the device to avoid many casts in many places.

Tested with: 3C589D-TP, 3CCSH572BT
Approved by: re (scottl, blanket ep)
2005-06-28 21:56:04 +00:00
Warner Losh
c4af929fb7 o When calling ep_get_macaddr(), provide it a local buffer. Add a comment
that says why we do this (or rather, explains that it is some voodoo magic
  that's poorly understood).  The local buffer fixes the crash on attach.
o Rename get_e() to ep_get_e() to avoid namespace pollution.

Submitted by: mux
Approved by: re (scottl)
2005-06-26 04:19:45 +00:00
Warner Losh
ab581af779 Eliminate unused argument in PCMCIA_CARD macro.
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.

Approved by: re (dwhite)
2005-06-24 14:36:54 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Warner Losh
ca44231197 Don't print 'unknown id' in the ep_pccard_identify routine. It is
expected to be unknown in some cases, and printing it clutters up
things too much.
2005-01-20 20:36:59 +00:00
Warner Losh
a20e4848bd u_intXX_t -> uintXX_t while I'm here. 2005-01-20 19:39:33 +00:00
Warner Losh
0409a8c387 Only attach to network functions. 2005-01-20 19:37:22 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Warner Losh
2e31e339d1 Fix disordering of pccarddevs.h noticed by bde. Also remove a few
redundant includes and fix some of the include disordering.

Submitted by: bde
2004-05-27 03:49:45 +00:00
Warner Losh
dba6dd177b Move to generating pccarddevs.h on the fly, both for the kernel and
the modules.

Also generate usbdevs.h automatically now, but a non-kernel file is
stopping that at the moment.
2004-05-26 00:53:10 +00:00
Warner Losh
1c4c419607 MFp4:
o Remove redundant $FreeBSD$
o Better comments about ep_get_macaddr.
o remove one tab in a switch statement (style only)
o Recognize ID 0x0035 as the device ID for the 3CXEM556 that I have.  This
  makes the 3CXEM556 work for me.  Not 100% sure this is the assigned ID,
  as I don't have the datasheets for this part, but it does work and get
  the correct ethrnet address.
o Comment about the whole fake IRQ 3 thing.  some need it, some don't, all
  work with it.
2003-11-02 20:13:39 +00:00
Warner Losh
6b5dc774ed Pass sc to GO_WINDOW macro.
Use SET_IRQ for pccard case, rather than exapnding it inline.

Requested by: mdodd
2003-10-26 22:28:20 +00:00
Warner Losh
1e56655e43 Minor style nits suggested by sam and mdodd:
o give an argument to EP_BUSY_WAIT
o use foo_locked rather than foo_body
o Add locking assertions for extra safety.
2003-10-25 21:28:40 +00:00
Warner Losh
c365ed47e4 Whole grab-bag of changes:
o Make the driver MPSAFE
o Some changes due to diff reduction effort with vx.
o Removed some obsolete junk.

Reviewed by: sam, modd
2003-10-25 04:09:49 +00:00
Warner Losh
3dc59524c7 Transition to using bus_space macros rather than the inb/outb/etc.
Use EP_{READ,WRITE}{,_MULTI}_{1,2,4} instead.  I've had several people
submit patches like this over the years of varying qualities, markm
being the last.  The names were chosen in consulation with mdodd on
irc.

I've tested this with only PCMCIA cards: 3CCE589EC and 3CCSH572BT.
I've not tried with my more extensive ISA, EISA and cbus collection.

Reviewed by: mdodd
2003-10-18 15:22:43 +00:00
Mark Murray
024351e027 Style fixes of the whitespace variety. Fix long lines and tabs. 2003-08-30 08:10:58 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Mark Murray
5146af6d82 Style(9) cleanup. There was no consistent style in this driver, and
The next round of commits will be to fix up locking in it. This lot
is to at least give a consistent base to work off.

OK'ed by:	imp, mdodd
2003-07-17 19:37:56 +00:00
Warner Losh
f5746231ff Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
Matthew N. Dodd
672fc9ebf6 - Free interrupt handler in ep_free().
- Move ep_pccard_detach() to if_ep.c and rename to ep_detach()
- Specify detach methods for all bus frontends.
2003-03-29 22:27:41 +00:00
Matthew N. Dodd
bb25efadc4 - Return error status instead of value in get_e().
- Modify ep_get_macaddr() to return an error status.
- Reverse the return value logic of eeprom_rdy().
2003-03-29 21:44:46 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Takanori Watanabe
6e8f09ca61 Fix build breakage on my pccard related commit. 2002-05-31 01:08:49 +00:00
Warner Losh
bca07edc83 More devices. Obtained from NetBSD. 2001-11-15 07:57:38 +00:00
Warner Losh
9de4df498c Migrate to PCMCIA_CARD() macros 2001-11-15 07:52:49 +00:00
Warner Losh
269b3a8211 s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
Warner Losh
828e38343a Use PCCARD_CIS_xxx #defines for the table of oem ids. These usually
translate to all NULLs (as for all the ones in this commit).
2001-01-21 08:15:37 +00:00
Peter Wemm
ce1c1e5def Add the 3COM ID's that I could find in the pccarddevs file that seemed
to match the pccard.conf file.  There are more ID's that need adding, but
these seem to be the common ones.

This was committed on an ep0 interface under NEWCARD:
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x300-0x30f irq 9 function 0 config 1 on pccard1
ep0: Ethernet address 00:10:4b:df:48:57

Reviewed by: imp
2001-01-07 21:24:41 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Warner Losh
07dad7e607 Remove 7 unnecessary includes frmo phk's script 2000-09-20 19:31:37 +00:00
Warner Losh
2276cee521 Implement indirection in the pccard probe/attach. This should make it
possible to have different probe/attach semantics between the two
systems and yet still use the same driver for both.

Compatibility methods for OLDCARD drivers.  We use these routines to make
it possible to call the OLDCARD driver's probe routine in the context that
it expects.  For OLDCARD these are implemented as pass throughs to the
device_{probe,attach} routines.  For NEWCARD they are implemented such
such that probe becomes strictly a matching routine and attach does both
the old probe and old attach.

compat devices should use the following:

	/* Device interface */
	DEVMETHOD(device_probe),	pccard_compat_probe),
	DEVMETHOD(device_attach),	pccard_compat_attach),
	/* Card interface */
	DEVMETHOD(card_compat_match,	foo_match),	/* newly written */
	DEVMETHOD(card_compat_probe,	foo_probe),	/* old probe */
	DEVMETHOD(card_compat_attach,	foo_attach),	/* old attach */

This will allow a single driver binary image to be used for both
OLDCARD and NEWCARD.

Drivers wishing to not retain OLDCARD compatibility needn't do this.

ep driver minorly updated.

sn driver updated more than minorly.  Add module dependencies to allow
module to load.  Also change name to if_sn.  Add some debugging code.
attempt to fix the cannot allocate memory problem I'd been seeing.
Minor formatting nits.
2000-09-19 04:39:20 +00:00
Warner Losh
4bae64510b Add ID for 3C1. It is a etherlink iii in a CompactFlash form factor.
It doesn't seem to work, but at least is identified correctly.  Minor
tree housekeeping on my part.
2000-09-13 03:57:37 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Warner Losh
3f994c78d5 Remove unloaded printf. We do this now in the newbus layer. 2000-04-17 04:39:38 +00:00
Matthew N. Dodd
f0b421372f Fix driver to restore function on 3c574 adapters. The panic on
ifconfig and bogus ethernet address (4b:57:4b:57:4b:57) has been
hacked around.  I'll revisit this when I have a clue whats going on.

Reviewed by:	obrien
2000-01-15 05:21:43 +00:00
Warner Losh
e9cb811b17 Commit kernel part of patches to get the 3Com OfficeConnect 3CXSH572BT
working on -current.

Submitted by: Eric D. Futch <efutch@nyct.net>
Approved by: mdodd
2000-01-10 02:32:43 +00:00
Warner Losh
5aa701b662 kill debug printf that says detach 1999-12-10 07:24:39 +00:00
Warner Losh
e09f49b6fa Fix the hang on card eject problem and maybe the hang on suspend
problem.

o Create new timeout routine so we don't detach the card inside a ISR
  but instead drop back to spl0 via a timeout of 0.
o Actually delete the child of the pccard device rather than just faking
  it badly.
o Fix sio, ed and ep to have pccard detach routines that are int rather
  than void.
o Fix ep and ed pccard detach routines to use if_detach rather than just
  if_down.  if_detach destroys the device, while if_down just marks it
  down.  In this incarnation of the pccard things, we map the disable
  the slot action to detach the driver, which removes the driver from the
  device tree.  When that is done, a panic would soon follow as the
  ifconfig tried to down the device.

Didn't fix:
o Should cache the pccard dev child's pointer in struct slot
o remove now unused parts of struct slot
o Any driver using softc after detach has been called.  sio's softc used
  to be statically allocated, so you could check sc->gone, but that is
  now gone.
o Didn't remove gone from softc of drivers that use the old pccard method.

Didn't test:
o ed driver changes
o sio driver changes on pccards
o suspend (no laptop or apm support on my desktop)
1999-12-01 07:38:54 +00:00
Warner Losh
b1ef7ecbc7 Kill unneeded #includes. They were left over from the short period of
time when a strcmp against the device name was required.  Sio patches
sent to peter for review.
1999-11-20 05:16:14 +00:00
Warner Losh
5eafefaf7a Add (untested) support for the 3C562D/3C563D. I have been unable to
test this support since I don't have the dongle for the card in
question and the dongle I have for my 3C589D doesn't seem to work on
it.  I don't know if this is due to the damage I did to the 562 card
in transit from freebsdcon, or a mis-matched dongle...
1999-10-29 06:27:07 +00:00
Warner Losh
c864a1a7e8 Fix identify code. This also fixes the eeprom messages.
pccard attachments must activate the resources they want to access.
ep didn't do this, so of course thee eeprom came back as busy.  ed and
sio already did this.  It was only due to a bug in the logic that the
probe succeeded.  These problems have been fixed.
1999-10-28 06:12:58 +00:00
Warner Losh
806338b15d Last change to pccard_nbk now obviates the need to check the name of
the device in question.
Also fix warnings on if_ep_pccard.c
1999-10-28 05:06:14 +00:00
Matthew N. Dodd
79a9057038 HEADS UP! All 3c5x9 users!
- Rip out all the static softc stuff and do softc allocation the right way.
- Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY
  method to enumerate all non-PnP ISA devices.

  This has the following consequences:

	- No 'ep' devices may be hardwired.
	  - All hardwired devices will probably be detected twice.
	    By hardwired I mean:

		device          ep0     at isa? port 0x300 irq 10

	- 'ep' devices are ordered by bus, slot, and then MAC address.

- Make 3c509B cards work in PnP mode.  Yes, they really work.
- Convert over to using ifmedia for media selection.  No more of this
  lame 'linkX' stuff.
- Consolidate a lot of duplicated code.
- Make a stab at not breaking MII based PCCARD devices.
  I doubt that the PCCARD stuff works any more than it did before my
  changes but theres hope.  My PCCARD hardware should arrive in a
  week or so.
- Retreive the media settings from the card EEPROM rather than guessing.
  I've got a 3c509-TPO that thinks its got an AUI port and if others
  can report similar problems I'll write a bit of clever code that will
  fix this but right now it works correctly on all but 1 card.
- Clean up a few things and make some cosmetic changes.
- Add myself as the MAINTAINER since nobody else wants to.  I'm
  in the best position to do this as I've got an example of most
  of the cards:

	EISA	3c579	bnc/aui
	MCA	3c529	tp/aui
	ISA	3c509	tpo
	ISA-PnP	3c509B	combo

   If someone wants to send me a any cards I don't have I'd appriciate
   it.  Also welcome are 3c59x boards since I'll be folding if_vx and
   if_ep at some point.
1999-10-27 06:25:16 +00:00
Warner Losh
758b76dc94 Add newbus attachment for pccard driver. Heavily tested by me, and
I'm committing this from a laptop running this driver.  Have only one
devclass for all ep devices (at least for pccard and eisa) so unit
numbering is sane.  Might not work with both isa and non-isa devices
on the same system until ep is updated (Matt has some patches in the
pipeline which should resolve this, he wanted me to commit this so he
can resolve any conflicts against cvs rather than my patches).

Reviewed by: Matt Dodd <mdodd@freebsd.org>
1999-10-25 02:52:16 +00:00