that Bruce asked for.
These still are not quite perfect, and in particular, it can get
upset on extreme boundary cases (addr = 0xfff, len = 0xffffffff,
which would end up mapping a single page rather than failing), but
this is better code that I committed before.
(note, the VM system does not (apparently) support single mmap segment
sizes above 0x80000000 anyway)
the S-Video input. It also has code in the driver for the meteor RGB support
and some other bug fixes. I don't have a meteor RGB but I have been told
that it works.
Submitted by: Jim Lowe <james@miller.cs.uwm.edu>
queue type is not set to QUEUE_NONE. This appears to have
caused a hang bug that has been lurking.
2) Fix bugs that brelse'ing locked buffers do not "free" them, but the
code assumes so. This can cause hangs when LFS is used.
3) Use malloced memory for directories when applicable. The amount
of malloced memory is seriously limited, but should decrease the
amount of memory used by an average directory to 1/4 - 1/2 previous.
This capability is fully tunable. (Note that there is no config
parameter, and might never be.)
4) Bias slightly the buffer cache usage towards non-VMIO buffers. Since
the data in VMIO buffers is not lost when the buffer is reclaimed, this
will help performance. This is adjustable also.
- split driver into FreeBSD specific and camera specific portions
(qcamio.c can run in user mode, with a Linux "driver top" etc,
and qcam.c should be trivial to port to NetBSD and BSDI.)
- support for 4bppand bidirectional transfers working better
- start of interleaved data-transfers byte-stream decodes (some of this
stuff has been pulled out for the moment to make it easier to debug)
At this point, anyone who wants to port it to other platforms should feel
free to do so. Please feed changes directly back to me so that I can produce
a unified distribution.
doesn't break support for the older models (tested with my 3C589B).
Reviewed by: Joshua Gahm <jgahm@BBN.COM>
Submitted by: hosokawa@mt.cs.keio.ac.jp (HOSOKAWA Tatsumi)
prevent it from conflicting with other drivers (like the aic7xxx driver).
Most of the work was in spliting out common portions of the driver and
making them generic enough to be called from the eisaconf probe.
The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa
configuration mode.
aha1742.c aic7770.c bt74x.c:
Only call eisa_registerdev after the probe is successfully.
eisaconf.c:
Increase kdc->kdc_datalen during the eisa_reg* functions instead of
in the eisa_add* functions since eisa_registerdev has already been
called and we have a kdc to manipulate.
is <sys/unistd.h>, with the prototype in <unistd.h>. sys/unistd.h
is visible to the kernel compile, and is #included by unistd.h.
Also, I missed a reference to a static int in the midst of my other diffs.
kern_fork.c: add the tiny bit of code for rfork operation.
kern/sysv_*: shmfork() takes one less arg, it was never used.
sys/shm.h: drop "isvfork" arg from shmfork() prototype
sys/param.h: declare rfork args.. (this is where OpenBSD put it..)
sys/filedesc.h: protos for fdshare/fdcopy.
vm/vm_mmap.c: add minherit code, add rounding to mmap() type args where
it makes sense.
vm/*: drop unused isvfork arg.
Note: this rfork() implementation copies the address space mappings,
it does not connect the mappings together. ie: once the two processes
have split, the pages may be shared, but the address space is not. If one
does a mmap() etc, it does not appear in the other. This makes it not
useful for pthreads, but it is useful in it's own right for having
light-weight threads in a static shared address space.
Obtained from: Original by Ron Minnich, extended by OpenBSD
Close the ip-fragment hole.
Waste less memory.
Rewrite to contemporary more readable style.
Kill separate IPACCT facility, use "accept" rules in IPFIREWALL.
Filter incoming >and< outgoing packets.
Replace "policy" by sticky "deny all" rule.
Rules have numbers used for ordering and deletion.
Remove "rerorder" code entirely.
Count packet & bytecount matches for rules.
Code in -current & -stable is now the same.
systems (my last change did not mix well with some firewall
configurations). As much as I dislike firewalls, this is one thing I
I was not prepared to break by default.. :-)
Allow the user to nominate one of three ranges of port numbers as
candidates for selecting a local address to replace a zero port number.
The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg)
call. The three ranges are: default, high (to bypass firewalls) and
low (to get a port below 1024).
The default and high port ranges are sysctl settable under sysctl
net.inet.ip.portrange.*
This code also fixes a potential deadlock if the system accidently ran out
of local port addresses. It'd drop into an infinite while loop.
The secure port selection (for root) should reduce overheads and increase
reliability of rlogin/rlogind/rsh/rshd if they are modified to take
advantage of it.
Partly suggested by: pst
Reviewed by: wollman
to help diagnose a problem on wcarchive (where the kernel stack was
sometimes not present), but is useful in its own right since swapping
actually reduces performance on some systems (such as wcarchive).
Note: swapping in this context means making the U pages pageable and has
nothing to do with generic VM paging, which is unaffected by this option.
Reviewed by: <dyson>
port addresses (even though the PC architecture doesn't support them).
Add code to limit the I/O map size based on the lowest set bit of the
address. This cures the problem with the BT946C only having a 16 bit
map register, in voiolation of the PCI specs, without giving up the
general support of >65K port regions.
DEVFS filesystems..
- if ( error = dev_add_name(child->name,parent->dnp
+ if ( error = dev_add_name(child->name,falias->dnp
Ok bruce, this is the one you were seeing..
- Optimise the linux a.out loading and uselib system calls so they
take advantage of some of John's recent interface improvements.
Basically, this means they make far less map changes than before.
- Attempt to plug some potentially nasty kernel_map memory leaks..
- Improve support for QMAGIC libs (I only use QMAGIC (ie: a.out libraries from
the slackware 3.0 dist) but this depends on other changes to enhance
the /compat/linux support)
- uselib goes out through a single exit as part of the resource tracking
that I did when closing the resource leaks on errors. This could be
cleaner than what I did, but making a 30-deep nested if/else was not my
idea of fun, neither did I want to repeat the same code 30 times over for
each failure possibility. I guess this function needs to be split into
smaller functions to solve this.
I've been running the Linux Netscape-2.0 (with Java) to test this, and apart
from the long-standing problem with the missing scrollbars, it appears to
still work as before with ZMAGIC libs (and the leaks).. However, I've
been using it with mods for the signal trampoline code for native linux stack
frames on signals and exterminated the blasted sigreturn printf() problem,
so I can't be certain that there is not a dependency on something else.
- Clean up the access to our ifnet structure by caching a pointer
to it instead of always digging through our softc structure.
Submitted by: Watchdog fixes by Serge A. Babkin <babkin@hq.icb.chel.su>
exactly as I did (should have checked there first I guess) except my
macro for TAILQ_INSERT_BEFORE took an unneeded arg. We now match 4.4Lite2.
Suggested by: Jeffrey Hsu <hsu@FreeBSD.org>
- fill in and use ifp->if_softc
- use if_bpf rather than private cookie variables
- change bpf interface to take advantage of this
- call ether_ifattach() directly from Ethernet drivers
- delete kludge in if_attach() that did this indirectly
and rmx_recvpipe. This has no demonstrable effect on performance.
(ttcp reports about 44 Mbit/s for all the buffer sizes I tried between
16384 and 65536.)
pmap_activate since it's not used anymore. Changed cpu_fork so that
it uses one line of inline assembly rather than calling mvesp() to
get the current stack pointer. Removed mvesp() since it is no longer
being used.
fixes for previous version of new pipes from Bruce Evans. This
new version:
Supports more properly the semantics of select (BDE).
Supports "OLD_PIPE" correctly (kern_descrip.c, BDE).
Eliminates incorrect EPIPE returns (bash 'pipe broken' messages.)
Much faster yet, currently tuned relatively conservatively -- but now
gives approx 50% more perf than the new pipes code did originally.
(That was about 50% more perf than the original BSD pipe code.)
Known bugs outstanding:
No support for async io (SIGIO). Will be included soon.
Next to do:
Merge support for FIFOs.
Submitted by: bde
for me, but has gotten a bit flakey in bidirectional parallel port mode.
Fix a bug in bidirectional parallel port transfers, more work is still
needed here (testers welcome).
Minor cleanup.
drives require ST_Q_SNS_HLP, they also wrongly accept a blocksize of
1024 in the first place (for a QIC-150 cartridge), but complain later
about it. The hack is to only probe for 512 for them.
Reorder the entries in st_decide_mode() so that QIC >= 525 is properly
accepted as variable blocksize.
vs unidirectional transfer modes. The kernel handles hardware, user mode
programs shouldn't get in the way.
This cleans up some really ugly grots that I hated too. :-)
Suggested by: Sujal Patel <smpatel@wam.umd.edu>
* this is my unoptimized driver, it works fine, it's not as fast as it
* could be (yet) -- I have yet to merge in ideas from other QuickCam
* developers.
* warning: this user interface is still in flux pending negotiations
* with other quickcam driver authors. It is _not_ compatible with the
* original linux interface due to the fact that it was too restrictive.
that don't announce support for command queues.
SCSI_NCR_DFLT_TAGS can be specified in the kernel config file
and sets the default number of tags per disk drive.
A value of 0 means "no tags".
Minor correction in debug messages: Values from the msg_in
buffer were being printed in the msg_out trace message ...
The code outputs the dc then calls the device specific externalize
routines to fill in the dc_data area. The old code assumed that dc_data
started one byte from the end of the dc, but with the compiler optimizing
alignment and padding, this isn't always the case. Do an explicit
&(dc.dc_data) - &dc. This fixes lsdev -c which must have been broken
for some time.
- Call eisa_registerdev as soon as we have a device match. This allows the
"eisa_add_*" routines to tweak kdc_datalen as the kdc grows and shrinks.
eisaconf.c
- externalize the linked lists that hold our ioaddrs and maddrs.
caused by a different reason):
. #ifndef __FreeBSD__ around check for negative size, FreeBSD size_t is
unsigned
. Disable mirror/parity if interleave size is 0 (i.e., serial concatenation).
when a connection enters the ESTBLS state using T/TCP, then window
scaling wasn't properly handled. The fix is twofold.
1) When the 3WHS completes, make sure that we update our window
scaling state variables.
2) When setting the `virtual advertized window', then make sure
that we do not try to offer a window that is larger than the maximum
window without scaling (TCP_MAXWIN).
Reviewed by: davidg
Reported by: Jerry Chen <chen@Ipsilon.COM>
(1) The reads are always done from the first n/2 disks.
(2) Each write is done twice, to the "data" disk (in the first half) and
the "mirror" disk (in the second half).
ccdbuffer() now takes an extra argument (struct ccdbuf **) and stores
the pointer to ccdbuf in there. In case of a mirrored write, it
allocates and stores two pointers. The "residual" is also doubled
for mirrored writes so that ccdiodone() can correctly tell when all
the writes are done.
clock interrupts.
Keep a 1-in-16 smoothed average of the length of each tick. If the
CPU speed is correctly diagnosed, this should give experienced users
enough information to figure out a more suitable value for `tick'.
fstat() syscall, rather than panic("linux newfstat").
(Note: I've extracted this from a larger set of diffs, I'm confident I've
not missed any dependencies but can't modload it to test it on my system)
feature in the header type register, though it is required by the PCI spec.
This should correctly probe both functions of the Intel 82371FB chip,
without the need for a special case based on the device ID.
1) The calculation didn't account for NMBCLUSTERS, so if a large number of
clusters was specified, it would leave little or no space for kernel
malloc.
2) It was bogusly restricted to v_page_count. This doesn't take into
account the sparseness of the malloc area and would have caused
problems on machines with small amounts of memory. It should probably
instead be changed to set the malloc limit to be constrained by
the amount of memory, but I didn't do this.
since setting up the DMA is too costly. Restructure for efficiency.
Pause the sequencer when a parity error occurs so that the kernel driver
knows during which phase the error was encountered.
. remove some unused variables
. declare worminit() right this time, it's actually extern (?)
. use wormminphys(), now that it's already there (hope i've got this right)
chipset. This does not attempt to do anything special with the timing
on the hope that the BIOS will have done the right thing already. The
actual interface from the wd driver to the new facility is not
implemented yet (this commit being an attempt at prodding someone else
to do it because looking at the wd driver always confuses the h*** out of me).
Also declared worminit() to avoid a compiler warning. Seems that the
other SCSI drivers don't declare XXinit() yet, so perhaps we'd also
create a typedef for these func's.
