In rS360398, a new iflib device method was added with default of opt out
for VLAN events needing an interface reset.
This is unintentional for bnxt(4) and is causing another bug in its VLAN
initialization code to affect the common case of adding and removing
VLANs on an existing interface.
PR: 269133
Tested by: kp
MFC after: 2 weeks
Sponsored by: BBOX.io
Differential Revision: https://reviews.freebsd.org/D41558
Since d49e83eac3, iflib(9) is ready
for this change.
While at it, make isc_driver_version strings (static) const where
not apparently un-const on purpose, too.
This reduces the size of the amd64 GENERIC by about 10 KiB.
Added support for application management interface. There are two types of commands supported:
1. Firmware IOCTLs: These ioctls are meant for firmware
consumption. Driver acts as a transport for these.
2. Driver only IOCTLs: These ioctls are meant for driver
consumption. Driver will serve these ioctls without sending them down
to firmware.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36448
Fixed the issue when kernel invokes _init() when it is already in
_init() state by invoking _stop() in such case.
Reviewed by: imp
Differential Revsion: https://reviews.freebsd.org/D36445
Removed sysctl node vlan_only which is not being used after migrating
from l2_set_rx_mask to l2_filter_alloc.
Reviewed by: imp
Differential Revsion: https://reviews.freebsd.org/D36444
Added support for Thor controller.
Below are the supported operations:
1. IPv4 ping (ICMP)
2. iperf / netperf (IPv4 TCP)
3. Promiscuous (tcpdump)
4. Can achieve 20 Gbps on a 25 G link (Uni-Di)
5. Can achieve 60 Gbps on a 100 G link (Uni-Di)
6. Port level and queue level driver stats.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36438
This is preparatory patch for making a base for Broadcom's Thor
controller support. It converts all doorbell writes into function
pointers.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36437
Updates the drivers to Broadcom's latest:
HWRM Version 1.10.2.34 using HSI definition version 1.8.4
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36436
When VLAN HW filter is disabled, the NIC does not pass any vlan tagged
traffic. Setting these flags on the device allows vlan tagged traffic to
pass.
PR: 236983
Tested by: pi
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34824
Before this change driver reported IFCAP_WOL_MAGIC enabled, but not
supported. It caused errors on some SIOCSIFCAP calls. Instead
report the support if hardware supports WOL, and enabled status if
it has such filter installed on boot.
Also bnxt_wol_config() should check WOL status in if_getcapenable(),
not in if_getcapabilities() to get current one.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This structure is shared among multiple instances of a driver, so we
should ensure that it doesn't somehow get treated as if there's a
separate instance per interface. This is especially important for
software-only drivers like wg.
DEVICE_REGISTER() still returns a void * and so the per-driver sctx
structures are not yet defined with the const qualifier.
Reviewed by: gallatin, erj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29102
Doing a 'dd' over iscsi will reliably cause stalls. Tx
cleaning _should_ reliably happen as data is sent.
However, currently if the transmit queue fills it will
wait until the iflib timer (hz/2) runs.
This change causes the the tx taskq thread to be run
if there are completed descriptors.
While here:
- make timer interrupt delay a sysctl
- simplify txd_db_check handling
- comment on INTR types
Background on the change:
Initially doorbell updates were minimized by only writing to the register
on every fourth packet. If txq_drain would return without writing to the
doorbell it scheduled a callout on the next tick to do the doorbell write
to ensure that the write otherwise happened "soon". At that time a sysctl
was added for users to avoid the potential added latency by simply writing
to the doorbell register on every packet. This worked perfectly well for
e1000 and ixgbe ... and appeared to work well on ixl. However, as it
turned out there was a race to this approach that would lockup the ixl MAC.
It was possible for a lower producer index to be written after a higher one.
On e1000 and ixgbe this was harmless - on ixl it was fatal. My initial
response was to add a lock around doorbell writes - fixing the problem but
adding an unacceptable amount of lock contention.
The next iteration was to use transmit interrupts to drive delayed doorbell
writes. If there were no packets in the queue all doorbell writes would be
immediate as the queue started to fill up we could delay doorbell writes
further and further. At the start of drain if we've cleaned any packets we
know we've moved the state machine along and we write the doorbell (an
obvious missing optimization was to skip that doorbell write if db_pending
is zero). This change required that tx interrupts be scheduled periodically
as opposed to just when the hardware txq was full. However, that just leads
to our next problem.
Initially dedicated msix vectors were used for both tx and rx. However, it
was often possible to use up all available vectors before we set up all the
queues we wanted. By having rx and tx share a vector for a given queue we
could halve the number of vectors used by a given configuration. The problem
here is that with this change only e1000 passed the necessary value to have
the fast interrupt drive tx when appropriate.
Reported by: mav@
Tested by: mav@
Reviewed by: gallatin@
MFC after: 1 month
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D27683
The pidx argument of isc_rxd_flush() indicates which is the last valid
receive descriptor to be used by the NIC. However, current code has
multiple issues:
- Intel drivers write pidx to their RDT register, which means that
NICs will only use the descriptors up to pidx-1 (modulo ring size N),
and won't actually use the one pointed by pidx. This does not break
reception, but it is anyway confusing and suboptimal (the NIC will
actually see only N-2 descriptors as available, rather than N-1).
Other drivers (if_vmx, if_bnxt, if_mgb) adhere to this semantic).
- The semantic used by Intel (RDT is one descriptor past the last
valid one) is used by most (if not all) NICs, and it is also used
on the TX side (also in iflib). Since iflib is not currently
using this semantic for RX, it must decrement fl->ifl_pidx
(modulo N) before calling isc_rxd_flush(), and then the
per-driver callback implementation must increment the index
again (to match the real semantic). This is confusing and suboptimal.
- The iflib refill function is also called at initialization.
However, in case the ring size is smaller than 128 (e.g. if_mgb),
the refill function will actually prepare all the receive
descriptors (N), without leaving one unused, as most of NICs assume
(e.g. to avoid RDT to overrun RDH). I can speculate that the code
looks like this right now because this issue showed up during
testing (e.g. with if_mgb), and it was easy to workaround by
decrementing pidx before isc_rxd_flush().
The goal of this change is to simplify the code (removing a bunch
of instructions from the RX fast path), and to make the semantic of
isc_rxd_flush() consistent across drivers. To achieve this, we:
- change the semantics of the pidx argument to the usual one (that
is the index one past the last valid one), so that both iflib and
drivers avoid the decrement/increment dance.
- fix the initialization code to prepare at most N-1 descriptors.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26191
Check copyin's error code (differ adding copyout checks at this time).
Don't directly access user memory in the switch statement.
Since bnxt_ioctl_data isn't all that big, use a stack allocation.
Reviewed by: jhb
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23933
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
While here, clean up magic numbers.
The memset(,0,) (and M_ZERO!) can just be removed; the bit_alloc() API already
zeros the allocation.
No functional change.
Reported by: Coverity
CID: 1378286
- Ever since the workaround for the silicon bug of TSO4 causing MAC hangs
was committed in r295133, CSUM_TSO always got disabled unconditionally
by em(4) on the first invocation of em_init_locked(). However, even with
that problem fixed, it turned out that for at least e. g. 82579 not all
necessary TSO workarounds are in place, still causing MAC hangs even at
Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled
in r323292 (r323293 for stable/10) for the EM-class by default, allowing
users to turn it on if it happens to work with their particular EM MAC
in a Gigabit-only environment.
In head, the TSO workaround for speeds other than Gigabit was lost with
the conversion to iflib(9) in r311849 (possibly along with another one
or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4
got enabled by default again, causing device hangs. Therefore, change the
default for this hardware class back to have TSO4 off, allowing users
to turn it on manually if it happens to work in their environment as
we do in stable/{10,11}. An alternative would be to add a whitelist of
EM-class devices where TSO4 actually is reliable with the workarounds in
place, but given that the advantage of TSO at Gigabit speed is rather
limited - especially with the overhead of these workarounds -, that's
really not worth it. [1]
This change includes the addition of an isc_capabilities to struct
if_softc_ctx so iflib(9) can also handle interface capabilities that
shouldn't be enabled by default which is used to handle the default-off
capabilities of e1000 as suggested by shurd@ and moving their handling
from em_setup_interface() to em_if_attach_pre() accordingly.
- Although 82543 support TSO4 in theory, the former lem(4) didn't have
support for TSO4, presumably because TSO4 is even more broken in the
LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class
devices was enabled as part of the conversion to iflib(9) in r311849,
causing device hangs. So revert back to the pre-r311849 behavior of
not supporting TSO4 for LEM-class at all, which includes not creating
a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2]
- In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET
(65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO
DMA must have a maxsize of the maximum TSO size plus the size of a
VLAN header for software VLAN tagging. The iflib(9) converted em(4),
thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE
in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET
in em_setup_interface() (apparently, left-over from pre-iflib(9)
times). So remove the later and correct iflib(9) to correctly cap
the maximum TSO size reported to the stack at IP_MAXPACKET. While at
it, let iflib(9) use if_sethwtsomax*().
This change includes the addition of isc_tso_max{seg,}size DMA engine
constraints for the TSO DMA tag to struct if_shared_ctx and letting
iflib_txsd_alloc() automatically adjust the maxsize of that tag in case
IFCAP_VLAN_MTU is supported as requested by shurd@.
- Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet
header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9)
so adjustment is automatically done in case IFCAP_VLAN_MTU is supported.
As a consequence, this adjustment now is also done in case of bnxt(4)
which missed it previously.
- Move the reduction of the maximum TSO segment count reported to the
stack by the number of m_pullup(9) calls (which in the worst case,
can add another mbuf and, thus, the requirement for another DMA
segment each) in the transmit path for performance reasons from
em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now
done in iflib_parse_header() rather than in the no longer existing
em_xmit(). Moreover, this optimization applies to all drivers using
iflib(9) and not just em(4); all in-tree iflib(9) consumers still
have enough room to handle full size TSO packets. Also, reduce the
adjustment to the maximum number of m_pullup(9)'s now performed in
iflib_parse_header().
- Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9)
in r311849 and r335338 respectively, these drivers didn't enable
IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed
through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on
by default but also lagg(4) was fixed in that regard in r203548. So
just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling
in {em,ixl,ixlv}_setup_interface().
- Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface()
which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre()
now.
- Remove some redundant/dead setting of scctx->isc_tx_csum_flags in
em_if_attach_pre().
- Remove some IFCAP_* duplicated either directly or indirectly (e. g.
via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS.
- Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as
iflib(9) adds that capability unconditionally.
- Remove some unused macros from em(4).
- Bump __FreeBSD_version as some of the above changes require the modules
of drivers using iflib(9) to be recompiled.
Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1]
Reviewed by: sbruno (earlier version), erj
PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2]
Differential Revision: https://reviews.freebsd.org/D15720
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Previously, it silently only supported auto, instead, log a message
indicating why only auto is supported.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13358
It's possible to change the SFP module when link is down, which would
change the available media types. This is part of D13358.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
New Stratus bnxt devices require support for short HWRM commands for VFs
to function. Enable their use, but only use them if it's both supported
and required... prefer the long HWRM commands when possible.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13269?id=36180
The firmware is always in little endian, use htole*() for all request fields
larger than one byte.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Some bnxt devices do not correctly send frames smaller than
52 bytes (without CRC), so add a quirk that will pad frames to an
arbitrary size before passing off to the encap routine.
Reported by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13269
Use our ifm_list of supported media types rather than nested switch
statements to find the current media type. Find a supported type that
matches the current speed.
Remove all workarounds while updating ifmr->ifm_active.
For BNXT_IFMEDIA_ADD, added Three more speeds IFM_10G_T, IFM_2500_T & IFM_2500_KX.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12896
1) Add new phy_types and speeds from the latest firmware header.
2) Introduced a macro to avoid code duplication and improve readability for
the invocation of ifmedia_add().
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12423