The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
The functions pbuf_init, kva_alloc, and keg_alloc_slab are significant
contributors to the kernel boot time when FreeBSD boots inside the
Firecracker VMM. Instrument them so they show up on flamecharts.
This is not completely exhaustive, but covers a large majority of
commands in the tree.
Reviewed by: markj
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35583
uma_timeout() has several responsibilities; it visits every UMA zone and
as of recently will drain underutilized caches, so is rather expensive
(>1ms in some cases). Currently it is executed by softclock threads
and so will preempt most other CPU activity. None of this work requires
a high scheduling priority, though, so defer it to a taskqueue so as to
avoid stalling higher-priority work.
Reviewed by: rlibby, alc, mav, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35738
Otherwise zone initializers can produce false positives, e.g., when
lock_init() attempts to detect double initialization.
Sponsored by: The FreeBSD Foundation
It was only called in the non-NUMA and single-domain paths.
Some of its assertions were duplicated in uma_zalloc_domain,
but some things were missed, especially memguard.
Reviewed by: markj, rstone
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34472
The uma_zalloc functions expect exactly one of [M_NOWAIT, M_WAITOK].
If neither or both are passed, print an error and a stack dump.
Only do this ten times, to prevent livelock. In the future, after
this exposes enough bad callers, this will be changed to a KASSERT().
Reviewed by: rstone, markj
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34452
Allow a zone to opt out of cache size management. In particular,
uma_reclaim() and uma_reclaim_domain() will not reclaim any memory from
the zone, nor will uma_timeout() purge cached items if the zone is idle.
This effectively means that the zone consumer has control over when
items are reclaimed from the cache. In particular, uma_zone_reclaim()
will still reclaim cached items from an unmanaged zone.
Reviewed by: hselasky, kib
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34142
Buckets in an SMR-enabled zone can legitimately be tagged with
SMR_SEQ_INVALID. This effectively means that the zone destructor (if
any) was invoked on all items in the bucket, and the contained memory is
safe to reuse. If the first bucket in the full bucket list was tagged
this way, UMA would unnecessarily poll per-CPU state before attempting
to fetch a full bucket from the list.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Kegs with no items reserved have uk_reserve = 0. So the check
keg->uk_reserve >= dom->ud_free_items will be true once all slabs are
depleted. Then, rather than go and allocate a fresh slab, we return to
the cache layer.
The intent was to do this only when the keg actually has a reserve, so
modify the check to verify this first. Another approach would be to
make uk_reserve signed and set it to -1 until uma_zone_reserve() is
called, but this requires a few casts elsewhere.
Fixes: 1b2dcc8c54 ("uma: Avoid depleting keg reserves when filling a bucket")
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32516
M_USE_RESERVE is used in a couple of places in the VM to avoid unbounded
recursion when the direct map is not available, as is the case on 32-bit
platforms or when certain kernel sanitizers (KASAN and KMSAN) are
enabled. For example, to allocate KVA, the kernel might allocate a
kernel map entry, which might require a new slab, which requires KVA.
For these zones, we use uma_prealloc() to populate a reserve of items,
and then in certain serialized contexts M_USE_RESERVE can be used to
guarantee a successful allocation. uma_prealloc() allocates the
requested number of items, distributing them evenly among NUMA domains.
Thus, in a first-touch zone, to satisfy an M_USE_RESERVE allocation we
might have to check the slab lists of other domains than the current one
to provide the semantics expected by consumers.
So, try harder to find an item if M_USE_RESERVE is specified and the keg
doesn't have anything for current (first-touch) domain. Specifically,
fall back to a round-robin slab allocation. This change fixes boot-time
panics on NUMA systems with KASAN or KMSAN enabled.[1]
Alternately we could have uma_prealloc() allocate the requested number
of items for each domain, but for some existing consumers this would be
quite wasteful. In general I think keg_fetch_slab() should try harder
to find free slabs in other domains before trying to allocate fresh
ones, but let's limit this to M_USE_RESERVE for now.
Also fix a separate problem that I noticed: in a non-round-robin slab
allocation with M_WAITOK, rather than sleeping after a failed slab
allocation we simply try again. Call vm_wait_domain() before retrying.
Reported by: mjg, tuexen [1]
Reviewed by: alc
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32515
Remove page zeroing code from consumers and stop specifying
VM_ALLOC_NOOBJ. In a few places, also convert an allocation loop to
simply use VM_ALLOC_WAITOK.
Similarly, convert vm_page_alloc_domain() callers.
Note that callers are now responsible for assigning the pindex.
Reviewed by: alc, hselasky, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31986
This is useful for measuring the number of pages that could be freed
from a NOFREE zone under memory pressure.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
For now, just hook the allocation path: upon allocation, items are
marked as initialized (absent M_ZERO). Some zones are exempted from
this when it would otherwise raise false positives.
Use kmsan_orig() to update the origin map for UMA and malloc(9)
allocations. This allows KMSAN to print the return address when an
uninitialized UMA item is implicated in a report. For example:
panic: MSan: Uninitialized UMA memory from m_getm2+0x7fe
Sponsored by: The FreeBSD Foundation
- Ensure that all items returned by UMA are aligned to
KASAN_SHADOW_SCALE (8). This was true in practice since smaller
alignments are not used by any consumers, but we should enforce it
anyway.
- Use a non-zero code for marking redzones that appear naturally in
items that are not a multiple of the scale factor in size. Currently
we do not modify keg layouts to force the creation of redzones.
- Use a non-zero code for marking freed per-CPU items, otherwise
accesses of freed per-CPU items are not detected by the runtime.
Sponsored by: The FreeBSD Foundation
When copying from the old buffer to the new buffer, we don't know the
requested size of the old allocation, but only the size of the
allocation provided by UMA. This value is "alloc". Because the copy
may access bytes in the old allocation's red zone, we must mark the full
allocation valid in the shadow map. Do so using the correct size.
Reported by: kp
Tested by: kp
Sponsored by: The FreeBSD Foundation
When estimating working set size, measure only allocation batches, not free
batches. Allocation and free patterns can be very different. For example,
ZFS on vm_lowmem event can free to UMA few gigabytes of memory in one call,
but it does not mean it will request the same amount back that fast too, in
fact it won't.
Update working set size on every reclamation call, shrinking caches faster
under pressure. Lack of this caused repeating vm_lowmem events squeezing
more and more memory out of real consumers only to make it stuck in UMA
caches. I saw ZFS drop ARC size in half before previous algorithm after
periodic WSS update decided to reclaim UMA caches.
Introduce voluntary reclamation of UMA caches not used for a long time. For
each zdom track longterm minimal cache size watermark, freeing some unused
items every UMA_TIMEOUT after first 15 minutes without cache misses. Freed
memory can get better use by other consumers. For example, ZFS won't grow
its ARC unless it see free memory, since it does not know it is not really
used. And even if memory is not really needed, periodic free during
inactivity periods should reduce its fragmentation.
Reviewed by: markj, jeff (previous version)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29790
Make it possible to reclaim items from a specific NUMA domain.
- Add uma_zone_reclaim_domain() and uma_reclaim_domain().
- Permit parallel reclamations. Use a counter instead of a flag to
synchronize with zone_dtor().
- Use the zone lock to protect cache_shrink() now that parallel reclaims
can happen.
- Add a sysctl that can be used to trigger reclamation from a specific
domain.
Currently the new KPIs are unused, so there should be no functional
change.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29685
Note that the per-domain variant does not shrink the target bucket size.
No functional change intended.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Add a UMA_ZONE_NOKASAN flag to indicate that items from a particular
zone should not be sanitized. This is applied implicitly for NOFREE
and cache zones.
- Add KASAN call backs which get invoked:
1) when a slab is imported into a keg
2) when an item is allocated from a zone
3) when an item is freed to a zone
4) when a slab is freed back to the VM
In state transitions 1 and 3, memory is poisoned so that accesses will
trigger a panic. In state transitions 2 and 4, memory is marked
valid.
- Disable trashing if KASAN is enabled. It just adds extra CPU overhead
to catch problems that are detected by KASAN.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29456
We already allow free(NULL) and uma_zfree(..., NULL). Make
uma_zfree_pcpu(..., NULL) work as well.
This also means that counter_u64_free(NULL) will work.
These make cleanup code simpler.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29189
startup_alloc() uses pmap_map() to map slabs used for bootstrapping the
VM. pmap_map() may ignore the hint address and simply return a range
from the direct map. In this case we must not unmap the range in
startup_free().
UMA uses bootstart and bootmem to track the range of KVA into which
slabs are mapped if the direct map is not used. Unmap a startup slab
only if it was mapped into that range.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27885
Use atomic testandset and testandclear to catch concurrent double free,
and to reduce the number of atomic operations.
Submitted by: jeff
Reviewed by: cem, kib, markj (all previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22703
The old implementation chose the largest bucket zone such that if the
per-CPU caches are fully populated, the total number of items cached is
no larger than the specified limit. If no such zone existed, UMA would
not do any caching.
We can now use uz_bucket_size_max to set a precise limit on the number
of items in a zone's bucket, so the total size of per-CPU caches can be
bounded more easily. Implement a new policy in uma_zone_set_maxcache():
choose a bucket size such that up to half of the limit can be cached in
per-CPU caches, with the rest going to the full bucket cache. This
fixes a problem with the kstack_cache zone: the limit of 4 * mp_ncpus
items meant that the zone would not do any caching, defeating the whole
purpose of the zone. That's because the smallest bucket size holds up
to 2 items and we may cache up to 3 full buckets per CPU, and
2 * 3 * mp_ncpus > 4 * mp_ncpus.
Reported by: mjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27168
uz_bucket_size_max is the maximum permitted bucket size. When filling a
new bucket to satisfy uma_zalloc(), the bucket is populated with at most
uz_bucket_size_max items. The maximum number of entries in the bucket
may be larger. When freeing items, however, we will fill per-CPPU
buckets up to their maximum number of entries, potentially exceeding
uz_bucket_size_max. This makes it difficult to precisely limit the
number of items that may be cached in a zone. For example, if one wants
to limit buckets to 1 entry for a particular zone, that's not possible
since the smallest bucket holds up to 2 entries.
Try to solve the problem by using uz_bucket_size_max to limit the number
of entries in a bucket. Note that the ub_entries field is initialized
upon every bucket allocation. Most zones are not affected since they do
not impose any specific limit on the maximum bucket size.
While here, remove the UMA_ZONE_MINBUCKET flag. It was unused and we
now have uma_zone_set_maxcache() to control the zone's cache size more
precisely.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27167
Allocation of a bucket can trigger a cross-domain free in the bucket
zone, e.g., if the per-CPU alloc bucket is empty, we free it and get
migrated to a remote domain. This can lead to deadlocks since a bucket
zone may allocate buckets from itself or a pair of bucket zones could be
allocating from each other.
Fix the problem by dropping the cross-domain lock before allocating a
new bucket and handling refill races. Use a list of empty buckets to
ensure that we can make forward progress.
Reported by: imp, mjg (witness(9) warnings)
Discussed with: jeff
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27341
It can useful for code outside the VM system to look up the NUMA domain
of a page backing a virtual or physical address, specifically when
creating NUMA-aware data structures. We have _vm_phys_domain() for
this, but the leading underscore implies that it's an internal function,
and vm_phys.h has dependencies on a number of other headers.
Rename vm_phys_domain() to vm_page_domain(), and _vm_phys_domain() to
vm_phys_domain(). Make the latter an inline function.
Add _vm_phys.h and define struct vm_phys_seg there so that it's easier
to use in other headers. Include it from vm_page.h so that
vm_page_domain() can be defined there.
Include machine/vmparam.h from _vm_phys.h since it depends directly on
some constants defined there.
Reviewed by: alc
Reviewed by: dougm, kib (earlier versions)
Differential Revision: https://reviews.freebsd.org/D27207
uma_zone_reserve()), messages like the following appear on the console:
"Freed UMA keg (Test zone) was not empty (0 items). Lost 528 pages of
memory."
When keg_drain_domain() is draining the zone, it tries to keep the number
of items specified in the reservation. However, when we are destroying the
UMA zone, we do not need to keep those items. Therefore, when destroying a
non-secondary and non-cache zone, we should reset the keg reservation to 0
prior to draining the zone.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27129
When a reserve of free items is configured for a zone, the reserve must
not be reclaimed under memory pressure. Modify keg_drain() to simply
respect the reserved pool.
While here remove an always-false uk_freef == NULL check (kegs that
shouldn't be drained should set _NOFREE instead), and make sure that the
keg_drain() KTR statement does not reference an uninitialized variable.
Reviewed by: alc, rlibby
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26772
zone_import() fetches a free or partially free slab from the keg and
then uses its items to populate an array, typically filling a bucket.
If a single allocation causes the keg to drop below its minimum reserve,
the inner loop ends. However, if the bucket is still not full and
M_USE_RESERVE is specified, the outer loop will continue to fetch items
from the keg.
If M_USE_RESERVE is specified and the number of free items is below the
reserved limit, we should return only a single item. Otherwise, if the
bucket size is larger than the reserve, all of the reserved items may
end up in a single per-CPU bucket, invisible to other CPUs.
Reviewed by: rlibby
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26771
Move dump_avail[] extern declaration and inlines into a new header
vm/vm_dumpset.h. This fixes default gcc build for mips.
Reviewed by: alc, scottph
Tested by: kevans (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26741
uma_zalloc_domain() allocates from the requested domain instead of
following a first-touch policy (the default for most zones). Currently
it is only used by malloc_domainset(), and consumers free returned items
with free(9) since r363834.
Previously uma_zalloc_domain() worked by always going to the keg for an
item. As a result, the use of UMA zone caches was unbalanced: we free
items to the caches, but always allocate from the keg, skipping the
caches.
Make some effort to allocate from the UMA caches when performing a
cross-domain allocation. This avoids blowing up the caches when
something is performing many transient allocations with
malloc_domainset().
Reported and tested by: dhw, glebius
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26427
When SMR was introduced, zone_put_bucket() was changed to always place
full buckets at the end of the queue. However, it is generally
preferable to use recently used buckets since their items are more
likely to be resident in cache. So, for buckets that have no constraint
on item reuse, use a last-in-first-out ordering as we did before.
Reviewed by: rlibby
Tested by: dhw, glebius
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26426
