place rather than updating the main loop's index variables from within
a subroutine and other revolting things like that. Move some more
globals into local variables.
program and it's use of global variables. Somehow, I managed to miss the
most obvious case.. "ifconfig ed0 10.0.0.1" failed (no "inet")
Submitted by: dfr
family inet if not specified. (eg: "ifconfig ed0" down would fail because
no family was specified, even though the up/down status is not per family)
Pointed out by: Wolfgang Helbig <helbig@MX.BA-Stuttgart.De>
- parse command options using getopt for consistancy
- sanitise the command parsing so that it's less like spaghetti
- implement a "-l" option (idea from NetBSD - just list names)
- attempt to clean up the sysctl parsing loop some more. It still needs
to be taken out the back and shot though.
- cut down on global usage, but there's a lot more scope for this.
- make usage string a bit closer to reality (it was missing lots of things)
Unfortunately, I did this for the second time but with the memory of
the NetBSD version still recently in my mind. It's hard to redo simple
changes or getopt stuff without making it look like what you've been
working with a few hours ago.
mount. It is possible to have v3 MOUNT but only v2 NFS, for instance for
a custom user-mode server like CFS.
Reviewed by: "Louis A. Mamakos" <louie@TransSys.COM>
Instead, reverse the order of the testing, so if a symbolic name starts with
a digit, we'll see if we can make a network address out of it first. If
that fails, then we'll call getnet...
options one would normally expect to set the realm, enable encryption,
and whatnot, but this actually is able to contact the remote server,
so at least it's a start. (As a bonus, the stripped static binary is
unquestionably exportable.)
now by default mount the last data track (thus last session), as
opposed to the very first session it has been mounting previously.
This is consistent with the ISO9660 multi-session idea, and the way
other operating systems are working.
There's support to mount arbitrary sessions using the -s option. This
way, you can simulate multi-session CDs on something like vn devices
that don't support CDIO* ioctl commands. You can also force the
historic behaviour with
mount -t cd9660 -o -s=0 /dev/cd0a /cdrom
nfs requests from non-privileged ports.
Change mountd such that it does never set this variable, but only clears
it when run with -n. Also document this in the man page.
a reserved port, so why not the nfs rpc's themselves?
With user allowed mounts, this perhaps needs a closer look, but
on the other hand, a user could already specify the flag.
If normal users should not be able to use resserved ports, the kernel
should check for the flag at mount time.
(presumably because the kernel is old). Moved the declaration of a
variable realated to this sysctl outside of an unrelated ifdef.
Not fixed:
- this sysctl is badly named (nfs occurs twice).
- it's silly to have for FreeBSD in FreeBSD code, especially when
only half of the FreeBSD-dependent code is ifdefed.
in uu_lock(). Add uu_lockerr() for turning the results of
uu_lock into something printable. Remove bogus section in man page
about race conditions allowing both processes to get the lock.
Include libutil.h and use uu_lock() correctly where it should.
Suggested by: ache@freebsd.org
it's internal malloc() implementation to try and avoid overstepping it's
resource limits (yuk!). Remain using libc's malloc(), but check the
resource limits right before trying to malloc the ramdisk space and leave
some spare memory for libc. In Andrey's words, the internal malloc
was "true evil".. Among it's sins is it's ability to allocate less memory
than asked for and still return success. stdio would just love that. :-)
Reviewed by: ache
I was not sure whether the fs_id fields should be printed in the clear
in case of sniffing over a network login etc. It might be an idea
to have somebody with spare time go through and find any other missing
fields that should be reported.
Definate 2.2.x/2.1.x candidate since it breaks the build.
automatically have random generation numbers. The kenel way of handling those
also changed. Further it is advised to run fsirand on all your nfs exported
filesystems. the code is mostly copied from OpenBSD, with the randomization
chanegd to use /dev/urandom
Reviewed by: Garrett
Obtained from: OpenBSD
something closer to how we used to do it. The Lite2 way is to check the
"fsclean" flag in the superblock and stop there if so (during preen).
We now do the various superblock sanity checks that we used to do before
since it's cheap. We now get the filesystem state summary again instead
of "FILESYSTEM CLEAN; CHECKING SKIPPED" (or whatever).
errors (mis-sorted prototypes, duplicated MNT_NOATIME, duplicated NULL
mntopts fixup).
Updated getopt() usage.
Fixed style bugs in FreeBSD changes (one or two per line for putfsent()
stuff).
- cleanups,
- whiteout support
- bug fixes (chflags missing on a few file types etc)
The dump/restore folks would want to have a closer look at this, the
change is pretty big.
- use new getvfsbyname() interface and mount(2) interface
**DANGER WILL ROBINSON!!** You must be running a -current kernel
from within a week or so in order for this to work!
2578 from Julian A. Likely not strictly needed, but it doesn't hurt
and protects ping against possible buffer overflows if the resolver
were to return large IP addresses.
used spaces to align the second line under the program name.
2) Cache uid after call to setuid(getuid()) so we don't waste a system call
for each packet with a call to getuid for the -v case.
3) Update manual to reflect new restriction on -l from last delta.
Suggested by: bde, Bill Fenner
2) Must be root to run preload (OpenBSD ping.c 1.8)
3) Don't print all replies unless verbose and root (from idea in
OpenBSD ping.c 1.10 and 1.11) to avoid leaking information available
only to root.
4) Remove unused h: from option string to getopt.
5) Make the compiler happy with exit(0) (Lite-2?)
Reviewed by: Dan Cross <tenser@spitfire.ecsel.psu.edu>
Good candidate for 2.2 and 2.1 (as are many of the 1.17 changes).
Do a better job of argument parsing.
Don't permit ping -f to a multicast address (very antisocial).
Don't permit -L, -I, -T options with unicast addresses.
Ensure that we ask for only AF_INET addresses (should close PR#2584).
Return <sysexits.h> error codes for failures. Document this.
Fix man page to identify the author and put sections in correct order.
buffer (so more difficult to exploit but better safe than sorry). Found
by comparing FreeBSD & OpenBSD sources/logs for the auditing process.
Reviewed by: Warner Losh
Obtained from: OpenBSD
Submitted by: Bruce Murphy <packrat@iinet.net.au>
Add '-a' audible flag, so terminal will beep upon receipt of a reply
packet. Useful for debugging ethernet runs, among other things.
/etc/rc started with "daemon" settings.
"window=" started with "default" settings
gettys started with "default" settings.
This should open the way to junk kernel options MAX_{OPEN,CHILD}
and the corresponding sysctl vars.
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
ftp.sgi.com:sgi/src/routed.tar.Z has a fix that has been cooking for a week
or so and that fixes a problem in the new hash tables for zillions of
interface aliases. The bug was that interfaces that come and go, such
as for SLIP and PPP, would get permanently lost.
Submitted by: Vernon J. Schryver <vjs@mica.denver.sgi.com>
dirs.c:
From OpenBSD 1.2, 1.3, 1.5, 1.8, 1.10, 1.11, 1.12
1.2:
use unique temporary files; netbsd pr#2544;
lukem@supp.cpr.itg.telecom.com.au
1.3:
updated patch from lukem@supp.cpr.itg.telecom.com.au
to also make -r and -R work again
1.5:
mktemp open & fdopen
1.8:
/tmp// -> /tmp/
1.10:
Fix strncpy usage and correct strncat length field,
from Theo. Also change some occurrence of MAXPATHLEN
with sizeof(foo).
1.11:
does noone know how to use strncat correctly?
1.12:
use mkstemp()
From NetBSD:
Use open rather than create so we can specify
exclusive open mode.
main.c:
From OpenBSD 1.2, 1.5
1.2:
From NetBSD: support $TAPE.
1.5
Set umask to be read only by owner until we set real
file permissions.
tape.c:
From NetBSD:
Use open rather than create so we can specify
exclusive open mode.
refer the reader to the detailed information in section 5,
remove the mount_* man pages for those file system. mount_std(8)
to cover all of the file systems it is currently being used
to mount.
mount_{devfs, fdesc, kernfs, procfs}.8 are now
MLINKS to mount_std.
some MD5 fixes, better tracing, configurable redirect processing,
and a fix to split-horizon/poisoned-reverse treatment.
Submitted by: Vernon J. Schryver <vjs@mica.denver.sgi.com>
do it themselves. (Some of these programs actually depended on this
beyond compiling the definition of struct ifinfo!) Also fix up some
other #include messes while we're at it.
Simplified average calculations. This also fixes potential overflow errors
and minor rounding inconsistencies (always round to nearest now).
Don't lose more SIGINFOs than necessary.
Print \r at the start of the status message. This clears the dots that
are sometimes left by ping -f.
Reviewed by: sef
the sd & od drivers. There is also slight changes to fdisk & newfs
in order to comply with different sectorsizes.
Currently sectors of size 512, 1024 & 2048 are supported, the only
restriction beeing in fdisk, which hunts for the sectorsize of
the device.
This is based on patches to od.c and the other system files by
John Gumb & Barry Scott, minor changes and the sd.c patches by
me.
There also exist some patches for the msdos filesys code, but I
havn't been able to test those (yet).
John Gumb (john@talisker.demon.co.uk)
Barry Scott (barry@scottb.demon.co.uk)
- Don't link against libkvm and don't uselessly include <kvm.h>.
- Declare constant objects as const.
- Declare functions with the correct types.
- Call functions with the correct parameters.
Not fixed:
- The sysctl parsing remains ugly (but it may be the best we can do).
- atnetrange() should use strtoul() rather than sscanf() for better
error checking.
that is stored in the hints file. If that search path contained
a non-existent directory (one, say, that had been removed), and
"ldconfig -m /a/perfectly/good/directory" was run, ldconfig returned
an error status without printing an error message. This caused
some confusing bombs when installing ports, in particular.
I changed it so that non-existent directories from the stored search
path are silently ignored. Only non-existent directories named
explicitly on the command line are treated as errors. Also, a
diagnostic is printed if and only if an error status is returned.
In an unrelated fix, ldconfig now silently ignores any directories
named on the command line when the "-r" option is given. Formerly,
these directories incorrectly made their way into the "search
directories" line of the listing. It really should be an error to
specify directories together with "-r", but I don't have time to
fix the manual page in that way right now.
2.2 Candidate.
