the '-C <directory>' after the subcommand.
Meanwhile, hard-code 'git -C <...> pull' for now.
Reported by: Michael Butler
Sponsored by: Rubicon Communications, LLC (netgate.com)
Makefile.* (cloudware):
- Consistify setting the BUILDDATE for snapshots.
release.conf.sample/release.sh:
- Run 'git clone' in 'quiet' mode.
Makefile.inc1:
- Set BUILDDATE and export the variable.
Sponsored by: Rubicon Communications, LLC (netgate.com)
release.sh:
- Bump the version number.
- Default VCSCMD to '/usr/local/bin/git clone'.
- Rename SVN* variables to GIT* equivalents.
- Remove dead code to inject a trailing '/' between two variables.
- Remove SRC_FORCE_CHECKOUT.
- Exit if the build host does not have devel/git installed.
- Install devel/git in the build chroot(8) for newvers.sh.
release.conf.sample:
- Update sample configuration variables to the git equivalent.
relnotes-search.sh:
- Remove script. It is specifically for use with svn.
Sponsored by: Rubicon Communications, LLC (netgate.com)
SRC_CONF, __MAKE_CONF and SRCCONF, respectively) through
to arm_install_base() and chroot_arm_build_release().
This prevents failures when the target image is intended
to be build with make.conf(5) and src.conf(5) overrides,
which are correctly handled for non-embedded image builds.
Reported and tested by: Daniel Engberg
PR: 238615
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
AVAHI to the list. This fixes the textproc/docproj build
seemingly following FLAVORS being added.
Specifically, the problem with the dependency chain here is:
- textproc/docproj depends on print/cups, which sets AVAHI=on
by default;
- net/avahi-app depends on devel/gobject-introspection, which
requires python3+;
- graphics/netpbm depends on graphics/mesa-libs, which can
only be built with python2.7;
- textproc/docproj depends on a number of graphics ports for
font rendering, etc.
MFC after: 3 days
MFC before: 12.0-BETA3
Sponsored by: The FreeBSD Foundation
FORCE_PKG_REGISTER is broken so multiple invocation of release.sh for the
same board will fails if /scratch isn't cleaned.
Leave it but deinstall the package first.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D16513
Using KERNEL made sense when all boards had different kernel configuration.
Now that all of them are using GENERIC use the board name instead
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D16512
This reduce the per-board arm_install_uboot to just install u-boot.
While here remove the installation of rpi.dtb and rpi2.dtb as we load
them from the UFS partition via ubldr.
Reviewed by: gjb, imp (older version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16239
within the CHROOTDIR. If it does not exist, unset CHROOTBUILD_SKIP
to prevent build failures.
Requested by: swills
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
chroot(8) to avoid mtime changes within the ports checkout,
which can cause checksum differences.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
not already exist within ${CHROOTDIR}. This allows re-using a build
chroot with CHROOTBUILD_SKIP set to a non-empty value and CHROOTDIR
set to '/' in release.conf.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Update the TARGET/TARGET_ARCH matching in release/release.sh and
release/Makefile.mirrors for simplification.
Discussed with: mmel
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
make(1) invocations following the OBJDIR restructuring to
ensure the output arm SoC image is in the correct directory.
Sponsored by: The FreeBSD Foundation
- Rename chroot_arm_armv6_build_release() to chroot_arm_build_release()
and make it hardware agnostic (such as armv6 -vs- armv7 -vs- arm64).
- Evaluate EMBEDDED_TARGET differently so release/tools/arm.subr can
be used for arm/armv6 and arm64/aarch64.
- Update comments and copyright.
In release/tools/arm.subr:
- In arm_create_disk(), change the default alignment from 63 to 512k,
fixing a boot issue on arm64 and EFI. [1]
- Update comments and copyright.
Add a RPI3 configuration file, pieces obtained from Crochet.
Obtained from: Crochet [1]
MFC after: 5 days
X-MFC-Note: maybe
Sponsored by: The FreeBSD Foundation
targets, similar to what is done for the run-autotools-fixup
override for non-arm targets.
MFC after: 3 days
Tested on: 12-CURRENT building 10-STABLE
Sponsored by: The FreeBSD Foundation
it's defined, installation image is shipped without source distribution
(src.txz)
Add the hability of defining NOSRC in release.conf and pass it to
'make release' argument
Approved by: gjb
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D6710
when re-using build chroot(8) environments.
This is based on the patch in the PR referenced below, but instead
of using 'reinstall' in two locations (one of which already uses
FORCE_PKG_REGISTER=1), changes the non-embedded behavior.
PR: 205998
Submitted by: ngie
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
This was discussed during the 10.2-RELEASE cycle, however
since we were nearing the end of the cycle, we decided to
defer this change until after 10.2-RELEASE.
Reminded by: so (delphij), jmg
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
set to empty values, which would result in nonintuitive build
errors.
MFC after: 3 days
X-MFC-With: r288341
PR: 203420 (related to)
Sponsored by: The FreeBSD Foundation
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Help from: many (boot testing, feedback, etc.)
Sponsored by: The FreeBSD Foundation
standard 'install' location for other architectures), then
compress the image with xz(1), and generate the CHECKSUM
files.
Sponsored by: The FreeBSD Foundation
before attempting to mount(8) devfs. Also, create the
.OBJDIR for the 'release' target, so files end up in the
correct location.
In tools/arm.subr, fix the target device when creating the
gpart partition scheme.
Sponsored by: The FreeBSD Foundation
building arm images. This is similar to tools/vmimage.subr
used for building virtual machine disk images. By default,
only arm_create_disk() and arm_install_base() contain real
functionality here, and arm_install_uboot() must be overridden
in the arm/KERNEL.conf file.
In release.sh, make create_arm_armv6_build_release() do
something now.
In arm/BEAGLEBONE.conf, set IMAGE_SIZE, PART_SCHEME, FAT_SIZE,
FAT_TYPE, and MD_ARGS, as well as make arm_install_uboot()
functional.
Parts of this were taken from disecting a previous BEAGLEBONE
image, and other parts obtained from Crochet sources.
Sponsored by: The FreeBSD Foundation