Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.
No functional change intended.
Reviewed by: kib
routine to write out the cylinder groups rather than recreating the
calculation of the cylinder-group check hash in fsck_ffs.
No functional change intended.
check-hash after making changes to the cylinder group. The problem
was that the journal-recovery code was calling the libufs bwrite()
function instead of the cgput() function. The cgput() function updates
the cylinder-group check-hash before writing the cylinder group.
This change required the additions of the cgget() and cgput() functions
to the libufs API to avoid a gratuitous bcopy of every cylinder group
to be read or written. These new functions have been added to the
libufs manual pages. This was the first opportunity that I have had
to use and document the use of the EDOOFUS error code.
Reviewed by: kib
Reported by: emaste and others
When the fsck_ffs program cannot fully repair a file system, it will
output the message PLEASE RERUN FSCK. However, it does not exit with a
non-zero status in this case (contradicting the man page claim that it
"exits with 0 on success, and >0 if an error occurs." The fsck
rc-script (when running "fsck -y") tests the status from fsck (which
passes along the exit status from fsck_ffs) and issues a "stop_boot"
if the status fails. However, this is not effective since fsck_ffs can
return zero even on (some) errors. Effectively, it is left to a later
step in the boot process when the file systems are mounted to detect
the still-unclean file system and stop the boot.
This change modifies fsck_ffs so that when it cannot fully repair the
file system and issues the PLEASE RERUN FSCK message it also exits
with a non-zero status.
While here, the fsck_ffs man page has also been updated to document
the failing exit status codes used by fsck_ffs. Previously, only exit
status 7 was documented. Some of these exit statuses are tested for in
the fsck rc-script, so they are clearly depended upon and deserve
documentation.
Reviewed by: mckusick, vangyzen, jilles (manpages)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D13862
previous behavior is preserved (the CG checksum is fixed). We're just
noisy about it now.
Reviewed by: kirk@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13884
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
1200046, the first version that supports this feature. If we set it,
then use an old kernel, we'll break the 'contract' of having
checksummed cylinder groups this flag signifies. To avoid creating
something with an inconsistent state, don't turn the flag on in these
cases. The first full fsck with a new kernel will turn this on.
Spnsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13114
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
superblocks created in revision 322297 only works on disks
with sector sizes up to 4K. This update allows the recovery
information to be created by newfs and used by fsck on disks
with sector sizes up to 64K. Note that FFS currently limits
filesystem to be mounted from disks with up to 8K sectors.
Expanding this limitation will be the subject of another
commit.
Reported by: Peter Holm
Reviewed with: kib
unable to automatically find alternate superblocks. This checkin
places the information needed to find alternate superblocks to the
end of the area reserved for the boot block.
Filesystems created with a newfs of this vintage or later will
create the recovery information. If you have a filesystem created
prior to this change and wish to have a recovery block created for
your filesystem, you can do so by running fsck in forground mode
(i.e., do not use the -p or -y options). As it starts, fsck will
ask ``SAVE DATA TO FIND ALTERNATE SUPERBLOCKS'' to which you should
answer yes.
Discussed with: kib, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11589
a mismatch, but will allow fsck to continue when the last alternate
superblock gets corrupted somehow.
Also, remove searching for alternate super blocks. It should have been
removed two years ago with r276737 by imp@. Leave minor vestiges in
place in case someone wants to solve the hard problem of knowing where
altnernate superblocks live without access to data formerly stored in
disklabels.
Differential Revision: https://reviews.freebsd.org/D11589
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
Instead of casting listmax and numdirs to unsigned values just define
them as unsigned and avoid the casts. Use reallocarray(3).
While here, fs_ncg is already unsigned so the cast is unnecessary.
Reviewed by: mckusick
MFC after: 2 weeks
The loop that scans the used inode map when soft updates is in use
assumes that the inosused variable is signed. However, ino_t is
unsigned, so the loop invariant is incorrect and the check for
inosused wrapping to < 0 can never be true.
Instead of checking for wrap after the fact just prevent it from
happening in the first place.
PR: 218592
Submitted by: Todd Miller <todd.miller@courtesan.com>
Reviewed by: mckusick
MFC after: 1 week
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Move sentence to a new line as advised by igor.
PR: 212474
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D8104
alternate superblock location when given in the -b option. When int
is 32-bits, block numbers larger than 2^32 would get truncated. This
commit changes the storage fpr the alternate superblock location
to a ufs2_daddr_t.
Submitted by: Dmitry Sivachenko <trtrmitya@gmail.com>
Maybe this case is impossible. Either way, when attempting to "/dev/"-prefix a
non-global device name, check that we do not overrun the f_mntfromname buffer.
In this case, truncating (with strlcpy or similar) would not be useful, since
the f_mntfromname result of getmntpt() is passed directly to open(2) later.
Reported by: Coverity
CID: 1006789
Sponsored by: EMC / Isilon Storage Division
Any value of uint16_t will be internally promoted to int so
changing them to an unsigned value doesn't help.
Missing revert value in suj_read().
X-MFC with: r298551
Any value of uint16_t will be internally promoted to int so
changing them to an unsigned value doesn't help.
Make clear we want to use uint32_t for closedisk()
X-MFC with: r298551
fs_ncg is of type uint32, and we were indexing it with an int.
Fixed this using an unsigned type and adopt some other unsigned
indexes to remind us when we are dealing with unsigned numbers.
Reviewed by: mckusick
MFC after: 5 days
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
errors have been detected in a particular run.
Clean up the global state variables so that a restart can happen correctly.
Separate the global variables in fsck_ffs and fsdb to their own file. This
fixes header sharing with fscd.
Correctly initialize, static-ize, and remove global variables as needed in
dir.c. This fixes a problem with lost+found directories that was causing
a segfault.
Correctly initialize, static-ize, and remove global variables as needed in
suj.c.
Initialize the suj globals before allocating the disk object, not after.
Also ensure that 'preen' mode doesn't conflict with 'restart' mode
Submitted by: scottl, max
Reviewed by: max, mckusick (earlier version)
Obtained from: Netflix
MFC after: 3 days
di_extsize is the EA size and as such it should be unsigned.
Adjust related types for consistency.
Reviewed by: mckusick (previous version)
MFC after: 3 weeks
Clang errors around printf could be trivially fixed, but the breakage in
sbin/fsdb were to significant for this type of change.
Submitter of this changeset has been notified and hopefully this can be
restored soon.
that they do not need to be read again in pass5. As this nearly
doubles the memory requirement for fsck, the cache is thrown away
if other memory needs in fsck would otherwise fail. Thus, the
memory footprint of fsck remains unchanged in memory constrained
environments.
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
than we're claiming it should still be considered an exact match. This
would previously leak frags that had been extended.
- If there is a sequence number problem in the journal print the sequence
numbers we've seen so far for debugging.
- Clean up the block mask related debuging printfs. Some are redundant.
MFC after: 1 week
operate on it if journal size is greater then SUJ_MAX. The later
constant is only to select maximal journal size when user did not
specified size explicitely.
Submitted by: Andrey Zonov <andrey@zonov.org>
Reviewed by: mckusick
MFC after: 1 week
must be recalculated. The blk_check pass of suj checker explicitely marks
inodes which owned such blocks as needing block count adjustment. But
ino_adjblks() is only called by cg_trunc pass, which is performed before
blk_check. As result, the block use count for such inodes is left wrong.
This causes full fsck run after journaled run to still find inconsistencies
like 'INCORRECT BLOCK COUNT I=14557 (328 should be 0)' in phase 1.
Fix this issue by running additional adj_blk pass after blk_check, which
updates the field.
Reviewed by: jeff, mckusick
MFC after: 1 week
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
The value of namlen is copied from on-disk d_namlen, which is a 8-bit
unsigned integer which can never exceed MAXNAMLEN (255) so the test is
always true. Moreover, UFS does not allow d_namelen being zero.
Change namlen from u_int to u_int8_t, and replace the unneeded test
with a useful test.
PR: bin/160339
Submitted by: Eugene Grosbein <eugen grosbein.pp.ru>
MFC after: 2 weeks
Approved by: re (kib)
to resolve errors which can cause corruption on recovery with the old
synchronous mechanism.
- Append partial truncation freework structures to indirdeps while
truncation is proceeding. These prevent new block pointers from
becoming valid until truncation completes and serialize truncations.
- On completion of a partial truncate journal work waits for zeroed
pointers to hit indirects.
- softdep_journal_freeblocks() handles last frag allocation and last
block zeroing.
- vtruncbuf/ffs_page_remove moved into softdep_*_freeblocks() so it
is only implemented in one place.
- Block allocation failure handling moved up one level so it does not
proceed with buf locks held. This permits us to do more extensive
reclaims when filesystem space is exhausted.
- softdep_sync_metadata() is broken into two parts, the first executes
once at the start of ffs_syncvnode() and flushes truncations and
inode dependencies. The second is called on each locked buf. This
eliminates excessive looping and rollbacks.
- Improve the mechanism in process_worklist_item() that handles
acquiring vnode locks for handle_workitem_remove() so that it works
more generally and does not loop excessively over the same worklist
items on each call.
- Don't corrupt directories by zeroing the tail in fsck. This is only
done for regular files.
- Push a fsync complete record for files that need it so the checker
knows a truncation in the journal is no longer valid.
Discussed with: mckusick, kib (ffs_pages_remove and ffs_truncate parts)
Tested by: pho
that was built before ffs grew support for TRIM, your filesystem will have
plenty of free blocks that the flash chip doesn't know are free, so it
can't take advantage of them for wear leveling. Once you've upgraded your
kernel, you enable TRIM on the filesystem (tunefs -t enable), then run
fsck_ffs -E on it before mounting it.
I tested this patch by half-filling an mdconfig'ed filesystem image,
running fsck_ffs -E on it, then verifying that the contents were not
damaged by comparing them to a pristine copy using rsync's checksum
functionality. There is no reliable way to test it on real hardware.
Many thanks to mckusick@, who provided the tricky parts of this patch and
reviewed the final version.
Reviewed by: mckusick@
MFC after: 3 weeks
Due to UFS insistence to pretend that device sector size is 512 bytes,
sector size is obtained from ioctl(DIOCGSECTORSIZE) for real devices,
and from the label otherwise. The file images without label have to
be made with 512 sector size.
In collaboration with: pho
Reviewed by: jeff
Tested by: bz, pho
include sys/time.h instead of time.h. This include is incorrect as
per the manpages for the APIs and the POSIX definitions. This commit
replaces sys/time.h where necessary with time.h.
The commit also includes some minor style(9) header fixup in newfs.
This commit is part of a larger effort by Garrett Cooper started in
//depot/user/gcooper/posix-conformance-work/ -- to make FreeBSD more
POSIX compliant.
Submitted by: Garrett Cooper yanegomi at gmail dot com
directory truncation to proceed before the link has been cleared. This
is accomplished by detecting a directory with no . or .. links and
clearing the named directory entry in the parent.
- Add a new function ino_remref() which handles the details of removing
a reference to an inode as a result of a lost directory. There were
some minor errors in various subcases of this routine.
- Use err/errx only when the case is really fatal. For other
cases, fall back to full fsck instead of quiting fsck.
- Plug a memory leak.
- Avoid divide by zero when printing summary.
- Output "FILE SYSTEM IS MARKED CLEAN" when a successful
journal recovering is done.
- When -f is specified, do full fsck instead of journal recovery.
brings in support for an optional intent log which eliminates the need
for background fsck on unclean shutdown.
Sponsored by: iXsystems, Yahoo!, and Juniper.
With help from: McKusick and Peter Holm
in background mode to correct expected inconsistencies that arise
during directory rename (see immediately previous update to this
file for details). If run on a kernel without the new functionality,
background fsck will simply ignore these inconsistencies rather
than fail.
Reported by: jeff
states. First its new name will be created causing it to have two
names (from possibly different parents). Next, if it has different
parents, its value of ".." will be changed from pointing to the old
parent to pointing to the new parent. Concurrently, its old name
will be removed bringing it back into a consistent state. When fsck
encounters an extra name for a directory, it offers to remove the
"extraneous hard link"; when it finds that the names have been
changed but the update to ".." has not happened, it offers to rewrite
".." to point at the correct parent. Both of these changes were
considered unexpected so would cause fsck in preen mode or fsck in
background mode to fail with the need to run fsck manually to fix
these problems.
This update changes these errors to be expected so that in preen
mode fsck will simply fix these transitional errors. For now,
background fsck will note these errors, but will need additional
kernel support to fix them, so will simply ignore them rather than
fail. A future update will allow background fsck to fix these
problems.
Reported by: jeff
cylinder group of a UFS1 filesystem as bad. The error was in the check
and not in the cylinder group itself. So even though fsck fixed the
cylinder group correctly, it was still endlessly reported as bad.
PR: 141992
MFC after: 2 weeks
Reported by: Dan Strick
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
robust. With these changes fsck is now able to detect and reliably
rebuild corrupted cylinder group maps. The -D option is no longer
necessary as it has been replaced by a prompt asking whether the
corrupted cylinder group should be rebuilt and doing so when requested.
These actions are only offered and taken when running fsck in manual
mode. Corrupted cylinder groups found during preen mode cause the fsck
to fail.
Add the -r option to free up excess unused inodes. Decreasing the
number of preallocated inodes reduces the running time of future
runs of fsck and frees up space that can allocated to files. The -r
option is ignored when running in preen mode.
Reviewed by: Xin LI <delphij@>
Sponsored by: Rsync.net
background fsck on the same file system might then print negative
numbers for reclaimed directories/files/fragments.
Address the issue in a limited degree, by using old summary data for
cg when bgfsck is performed.
Submitted by: tegge
MFC after: 1 week
systems less than 1 TB, due to using 32-bits integers for file system block
numbers. This also causes incorrect error reporting for foreground fsck.
Convert it to use ufs2_daddr_t for block numbers.
PR: kern/127951
Submitted by: tegge
MFC after: 1 week
userspace to kernel via nmount(), pass in the strings
"update", "snapshot", "reload".
We want to move away from passing MNT_ flags from userspace -> kernel
via nmount(), and instead favor passing the string options.
catastrophic recovery. Currently, this mode only validates whether a
cylindergroup has good signature data, and prompts the user to decide
whether to clear it as a whole.
This mode is useful when there is data damage on a disk and you are
working on copy of the original disk, as fsck_ffs(8) tends to abnormally
exit in such case, as a last resort to recover data from the disk.
doing the MNT_RELOAD, pass in "ro" and "update"
string mount options to nmount() instead of MNT_RDONLY and MNT_UPDATE flags.
Due to the complexity of the mount parsing code especially
with respect to the root file system, passing in MNT_RDONLY and MNT_UPDATE
flags would do weird things and would cause fsck to convert the root
file system from a read-only mount to read-write.
To test:
- boot into single user mode
- show mounted file systems with: mount
- root file system should be mounted read-only
- fsck /
- show mounted file systems with: mount
- root file system should still be mounted read-only
PR: 120319
MFC after: 1 month
Reported by: yar
number read from cylinder group. Chances that we read a smarshed
cylinder group, and we can not 100% trust information it has
supplied. fsck_ffs(8) will crash otherwise for some cases.
processing the information. chk1 is more prone to crash when insane
information is provided by the on-disk inode, and does not even work
if the inode is being smarshed badly.
whether fs_bsize is larger than MINBSIZE, which is larger than the
value that is used to compared with fs_bsize, the sizeof fs, so the
check followed, will be always true.
By inspecting the code and some old commit log, I believe that the
check must be that *fs_sbsize* is larger than sizeof fs. We round
up the size to nearest dev_bsize, as the smallest accepted fs_sbsize,
personally, I think this can be even changed to equal, because this
number is mostly an invariant in file systems.
With this check, fsck_ffs(8) will be more picky and has better
chance rejecting bad first superblock rather than referring to bad
value it supplied, thus gives better chance for it to check the
filesystem carefully.
read-only, so we can't simply exit right after calling gjournal_check(),
instead we need to ask about super block reload.
Submitted by: Niki Denev <niki@totalterror.net>
PR: misc/113889
Approved by: re (kensmith)
and -p flag was given perform fast file system checking (bascially only
garbage collecting of orphaned objects).
Rename bread() to blread() and bwrite() to blwrite() as we now link to
the libufs library, which also implement functions with that names.
Sponsored by: home.pl
initializing the sysctl mibs data before actually using them.
The original patchset (which is the actual version that is running
on my testboxes) have checked whether all of these sysctls and
refuses to do background fsck if we don't have them. Kirk has
pointed out that refusing running fsck on old kernels is pointless,
as old kernels will recompute the summary at mount time, so I
have removed these checks.
Unfortunatelly, as the checks will initialize the mib values of
those sysctl's, and which are vital for the runtime summary
adjustment to work, we can not simply remove the check, which
will lead to problem when running background fsck over a dirty
volume. Add these checks in a different way: give a warning rather
than refusing to work, and complain if the functionality is not
available when adjustments are necessary.
Noticed by: A power failure at my lab
Pointy hat: me
MFC After: 3 days
very slow process, especially for large file systems that is just
recovered from a crash.
Since the summary is already re-sync'ed every 30 second, we will
not lag behind too much after a crash. With this consideration
in mind, it is more reasonable to transfer the responsibility to
background fsck, to reduce the delay after a crash.
Add a new sysctl variable, vfs.ffs.compute_summary_at_mount, to
control this behavior. When set to nonzero, we will get the
"old" behavior, that the summary is computed immediately at mount
time.
Add five new sysctl variables to adjust ndir, nbfree, nifree,
nffree and numclusters respectively. Teach fsck_ffs about these
API, however, intentionally not to check the existence, since
kernels without these sysctls must have recomputed the summary
and hence no adjustments are necessary.
This change has eliminated the usual tens of minutes of delay of
mounting large dirty volumes.
Reviewed by: mckusick
MFC After: 1 week
