Rather than the tedious and error-prone grep of sys/conf/newvers.sh,
use the new -v arg to dig out the data that's desired.
Differential Revision: https://reviews.freebsd.org/D19849
Some i2c controller hardware does not provide a way to do individual START,
REPEAT-START and STOP actions on the i2c bus. Instead, they can only do
a complete transfer as a single operation. Typically they can do either
START-data-STOP or START-data-REPEATSTART-data-STOP. In the i2c driver
framework, this corresponds to the iicbus_transfer method. In the userland
interface they are initiated with the I2CRDWR ioctl command.
These changes add a new 'tr' mode which can be specified with the '-m'
command line option. This mode should work on all hardware; when an i2c
controller driver doesn't directly support the iicbus_transfer method,
code in the i2c driver framework uses the lower-level START/REPEAT/STOP
methods to implement the transfer. After this new mode has gotten some
testing on various hardware, the 'tr' mode should probably become the
new default mode.
PR: 189914
It's invalid to reference a C++ string's c_str() buffer after the object
goes out of scope. Adjust the scope of the string to match the use in
write(2) to fix the misuse.
CID: 1393383
Reported by: Coverity
ed(4) and ep(4) have been removed. fxp(4) remains popular in older
systems, but isn't as future proof as em(4).
Reviewed by: bz, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20311
Under certain tight race conditions, we found that the lack of a memory
barrier in bhyve's virtio handling causes it to miss a NO_NOTIFY state
transition on block devices, resulting in guest stall. The investigation
is recorded in OS-7613. As part of the examination into bhyve's use of
barriers, one other section was found to be problematic, but only on
non-x86 ISAs with less strict memory ordering. That was addressed in
this patch as well, although it was not at all a problem on x86.
PR: 231117
Submitted by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: jhb, kib, rgrimes
Approved by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19501
Check the legacy directory and use it instead if present.
Install these first if using beinstall.
UPDATING entry to follow.
Approved by: allanjude (mentor, in person)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20279
leap-seconds file from NIST at ftp://ftp.nist.gov/pub/time.
Future updates should use the NIST version of file, available
at ftp://ftp.nist.gov/pub/time/leap-seconds.list .
Requested by: ian@
Obtained from: ftp://ftp.nist.gov/pub/time/leap-seconds.3676924800
MFC after: 3 days
In mountd.c, the grouplist structures are linked into a single global
linked list headed by "grphead". The only use of this linked list is
to free all list elements when the exportlist elements are also all being
free'd at the time the exports are being reloaded.
This patch replaces this one global linked list head with a list head in
each exportlist structure, where the grouplist elements for that exported
file system are linked.
The only change is that now the grouplist elements are free'd with the
associated exportlist element as they are free'd instead of all grouplist
elements being free'd after the exportlist elements are free'd. This
change should have no effect in practice.
This is being done, since a future patch that will add a "-I" option for
incrementally updating the exports in the kernel needs to know which
grouplist elements are associated with each exported file system and
having them linked into a list headed by the exportlist element does that.
MFC after: 1 month
Factor code into two functions.
read_exportfile() a functon which reads the exports file(s) and calls
get_exportlist_one() to process each of them.
delete_export() a function which deletes the exports in the kernel for a file
system.
The contents of these functions is just the same code as was used to do the
operations, moved into separate functions. As such, there is no semantic change.
This is being done in preparation for a future commit that will add an
option to do incremental changes of kernel exports upon receiving SIGHUP.
MFC after: 1 month
As per https://datacenter.iers.org/data/latestVersion/16_BULLETIN_C16.txt:
INTERNATIONAL EARTH ROTATION AND REFERENCE SYSTEMS SERVICE (IERS)
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE ET DES SYSTEMES DE REFERENCE
SERVICE DE LA ROTATION TERRESTRE DE L'IERS
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : +33 1 40 51 23 35
e-mail : services.iers@obspm.frhttp://hpiers.obspm.fr/eop-pc
Paris, 07 January 2019
Bulletin C 57
To authorities responsible
for the measurement and
distribution of time
INFORMATION ON UTC - TAI
NO leap second will be introduced at the end of June 2019.
The difference between Coordinated Universal Time UTC and the
International Atomic Time TAI is :
from 2017 January 1, 0h UTC, until further notice : UTC-TAI = -37 s
Leap seconds can be introduced in UTC at the end of the months of December
or June, depending on the evolution of UT1-TAI. Bulletin C is mailed every
six months, either to announce a time step in UTC, or to confirm that there
will be no time step at the next possible date.
Christian BIZOUARD
Director
Earth Orientation Center of IERS
Observatoire de Paris, France
Requested by: rgrimes
Obtained from: ftp://tycho.usno.navy.mil/pub/ntp/leap-seconds.3757622400
MFC after: 3 days
This patch moves the code that removes and frees all exportlist elements
out into a separate function called free_exports().
It does the same for the insertion of a new exportlist entry into a list.
It also adds a second argument to ex_search() for the list to use.
None of these changes have any semantic effect. They are being done to
prepare the code for future patches that convert the single linked list
for the exportlist to a hash table of lists and a patch that will do
incremental changes of exports in the kernel.
And it fixes the argument for SLIST_HEAD_INITIALIZER() to be a pointer,
which doesn't really matter, since SLIST_HEAD_INITIALIZER() doesn't use
the argument.
MFC after: 1 month
- Remove Tn macros
- Refernce sysctl(8) instead of sysctl(1)
- Start new sentences on new lines
- Capitalize NFS where needed
- Use Fx for FreeBSD
- Remove a list block (Bl) that was added to the manual page
by accident in r335174
Reviewed by: bcr
Approved by: doc (bcr)
Differential Revision: https://reviews.freebsd.org/D20215
Remove unnecessary `char*` casting for arguments passed to `cget*(3)`, and
deconst `_PATH_PRINTCAP` before passing it to `cget*` via the `printcapdb`
variable.
This unblocks ^/projects/runtime-coverage-v2 from building cleanly on
universe13a.freebsd.org. I suspect the issue was introduced through some
changes to `bsd.*.mk` inclusion on the branch, which I will continue to
investigate/isolate.
MFC after: 1 week
Tested with: clang 8 (arm64)
The Windows virtio driver ignores the advertized seg_max field and
assumes the host can accept up to 67 segments in indirect descriptors,
triggering an assert in the bhyve process.
This brings back r282922 but with a couple of changes:
- It raises the block interface segment limit to 128 instead of 67.
- Linux's virtio driver assumes that the segment limit is no
larger than the ring size. To avoid breaking Linux guests,
raise the VirtIO ring size to 128, and cap the VirtIO segment
limit at ring size - 2 (effectively 126).
Reviewed by: rgrimes, Patrick Mooney <pmooney@pfmooney.com>
Obtained from: Joyent (Linux workaround)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18831
Port the logic used by getifaddrs(3) to handle the case where
NET_RT_IFLIST returns ENOMEM, which can occur if the list size changes
between the buffer allocation and sysctl read.
PR: 195191
Submitted by: Guy Yur <guyyur@gmail.com> (original version)
MFC after: 1 week
It was reported that without #ifdef INET6 around the declaration of "nbuf",
a build would report an unused variable. For some reason, I didn't see that
warning when I did a build, but it seems reasonable to add these #ifdef INET6's.
Submitted by: dmitryluhtionov@gmail.com
MFC after: 1 week
When the CPU Topology was added to bhyve in r332298 the SMBIOS table was
missed, this table passes topology information to the system and was still
using the old concept of each vCPU is a socket with 1 core and 1 thread.
This code did not even try to use the old sysctl information to adjust
this data.
Correct that by building a proper SMBios table, mapping the > 254 cases to
0 per the SMBios 2.6 specification that is claimed by the structure.
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde and/or phk (mentor), jhb (maintainer)
MFC: 3 days
Differential Revision: https://reviews.freebsd.org/D18998
The bhyve acpi MADT table was given a static space of 256 (0x100) bytes,
this is enough space to allow VM_MAXCPU to be 21, this patch changes that
so VM_MAXCPU can be of arbitrary value and not overflow the space by
actually calculating the space needed for the table.
PR: 212782
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde (mentor), jhb (maintainer)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18815
r346190 added support for printing of INET6 addresses for the "-o" option
(all opens) but missed adding support for INET6 addresses for the "-l" option.
This patch adds that support.
PR: 223036
MFC after: 1 week
Parse the R_MIPS_32 and R_MIPS_64 relocations. Both Elf_Rel and
Elf_Rela relocations are handled since O32 MIPS uses Elf_Rel while N64
uses Elf_Rela. Note that R_MIPS_32 is only handled for 32-bit mips
and R_MIPS_64 for 64-bit. N32 is untested.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D19870
points at the "latest" branch and one which points at the "quarterly"
branch. Install the "latest" version unless overridden via the newly
added PKGCONFBRANCH variable.
This does not change user-visible behaviour (assuming said vairable is
not set) but will make it easier to change the defaults in the future --
on stable branches we will want "latest" on x86 but "quarterly" elsewhere.
Discussed with: gjb
MFC after: 3 days
X-MFC: After MFCing this I'll make a direct commit to stable/* to
switch non-x86 architectures to "quarterly".
Previous spellings of my name (NGie, Ngie) weren't my legal spelling. Use Enji
instead for clarity.
While here, remove "All Rights Reserved" from copyrights I "own".
MFC after: 1 week
bhyve was previously using stdin for both reading and writing to the
console, which made it difficult to redirect console output. Use
stdin for reading and stdout for writing. This makes it easier to use
bhyve as a backend for syzkaller.
As a side effect, the change fixes a minor bug which would cause bhyve
to fail with ENOTCAPABLE if configured to use nmdm for com1 and stdio
for com2.
bhyveload already uses separate descriptors, as does the bvmcons driver.
Reviewed by: jhb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19788
Jobs using the @<second> syntax currently only get executed if they exist
when cron is started. The simplest reproducer of this is:
echo '@20 root echo "Hello!"' >> /etc/cron.d/myjob
myjob will get loaded at the next second==0, but this echo job will not
run until cron restarts. These jobs are normally handled in
run_reboot_jobs(), which sets e->lastexit of INTERVAL jobs to the startup
time so they run 'n' seconds later.
Fix this by special-casing TargetTime > 0 in the database load. Preexisting
jobs will be handled at startup during run_reboot_jobs as normal, but if
we've reloaded a database during runtime we'll hit this case and set
e->lastexit to the current time when we process it. They will then run every
'n' seconds from that point, and a full restart of cron is no longer
required to make these jobs work.
Reported by: Juraj Lutter (otis_sk.freebsd.org)
Reviewed by: allanjude, bapt, bjk (earlier version), Juraj Lutter
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19924
This is useful for arm (possibly other arches too) where we want to have
a GENERIC kernel that only include files for the different SoC. Since
multiple SoCs/Board needs the same device we would need to do either :
Include the device in a generic file
Include the device in each file that really needs it
Option 1 works but if someone wants to create a specific kernel config
(which isn't uncommon for embedded system), he will need to add a lots
of nodevice to it.
Option 2 also works but produce a lots of warnings.
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19424
This changes the sender mail address in a similar fashion to how MAILTO may
change the recipient. The default from address remains unchanged.
MFC after: 1 week
Backing out commit pending further discussion on the PCIe version
supported by pseudo (i.e. emulated) devices. See Differential for
details.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D19580
The patch adds support for printing of INET6 callback addresses.
It also adds the #ifdef INET, INET6 as requested by bz@.
PR: 223036
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19839
DEBUG_FLAGS is always added to CFLAGS. This setting appears to be
accidental and came in with r243327.
Reviewed by: anish, emaste, jhb, rgrimes
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19787
r345994 has finally fixed the bug that caused the nfsuserd(8) daemon to
fail when jails were enabled, so delete the BUGS entry from the man page.
PR: 205193
MFC after: 2 weeks
