without first removing the command from the relavent queue.
This was causing panics in the queue functions which check to ensure a command
is not on another queue.
Fixed some cases where the error from mfi_mapcmd was lost and where the command
was never released / dequeued in error cases.
Ensure that all failures to mfi_mapcmd are logged.
Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state
failed.
Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors.
Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc.
Commands which have timed out now set cm_error to ETIMEDOUT and call
mfi_complete which prevents them getting stuck in the busy queue forever.
Fixed possible use of NULL pointer in mfi_tbolt_get_cmd.
Changed output formats to be more easily recognisable when debugging.
Optimised mfi_cmd_pool_tbolt cleanup.
Made information about driver limiting commands always display as for modern
cards this can be severe.
Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an
error.
Added malloc checks for request_desc_pool including free when subsiquent errors
are detected.
Fixed overflow error in SIMD reply descriptor check.
Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO
build.
Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in
mfi_shutdown.
Move local hdr calculation after error check in mfi_aen_complete.
Fixed wakeup on NULL in mfi_aen_complete.
Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was
NULL.
Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we
would try to continue with the number of allocated commands but lots of places
in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do
this without lots of changes.
Removed mfi_total_cmds as its no longer used due the above change.
Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate.
Fixed timeouts actually firing at double what they should.
Setting hw.mfi.max_cmds=-1 now configures to use the controller max.
A few style (9) fixes e.g. braced single line conditions and double blank lines
Cleaned up queuing macros
Removed invalid queuing tests for multiple queues
Trap and deal with errors when doing sends in mfi_data_cb
Refactored frame sending into one method with error checking of the return
code so we can ensure commands aren't left on the queue after error. This
ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state.
Refactored how commands are cleaned up, mfi_release_command now ensures
that all queues and command state is maintained in a consistent state.
Prevent NULL pointer use in mfi_tbolt_complete_cmd
Fixed use of NULL sc->mfi_map_sync_cm in wakeup
Added defines to help with output of mfi_cmd and header flags.
Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd.
Reset now reinitialises sync map as well as AEN.
Fixed possible use of NULL pointer in mfi_build_and_issue_cmd
Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing
panic on failure.
Ensure that tbolt cards always initialise next_host_reply_index and
free_host_reply_index (based off mfi_max_fw_cmds) on both startup and
reset as per the linux driver.
Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so
it didn't clear the controller.
Prevent locks from being dropped and re-acquired in the following functions
which was allowing multiple threads to enter critical methods such as
mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:-
* mfi_tbolt_init_MFI_queue
* mfi_aen_complete / mfi_aen_register
* mfi_tbolt_sync_map_info
* mfi_get_log_state
* mfi_parse_entries
The locking for these functions was promoting to higher level methods. This
also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would
have paniced for recursive lock.
This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to
M_NOWAIT which can hence now fail but this was already expected as its return
was being tested.
Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks
the world if the cmd returned by mfi_dequeue_free isn't the first cmd.
Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load
which could hence be called after the caller has dropped the lock. If we
don't have the lock we aquire it and ensure we unlock before returning.
Fixed locking mfi_comms_init when mfi_dequeue_free fails.
Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool
on error.
Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails.
Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled
timeouts. This shouldn't be reduced below 50 seconds as its used for
firmware patching which can take quite some time.
Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with
MFI_DEBUG and allows the testing of controller reset that was provoking a
large number of the issues encountered here.
Reviewed by: Doug Ambrisko
Approved by: pjd (mentor)
MFC after: 1 month
* If both ends have negotiated (at least) one stream;
* Only if it's a single stream rate (MCS0-7);
* Only if there's more than one TX chain enabled.
Tested:
* AR9280 STA mode -> Atheros AP; tested both MCS2 (STBC) and MCS12 (no STBC.)
Verified using athalq to inspect the TX descriptors.
TODO:
* Test AR5416 - no STBC should be enabled;
* Test AR9280 with one TX chain enabled - no STBC should be enabled.
Removes a mtx_unlock call for mfi_io_lock which is never aquired
While I'm here fix a braceing style issue.
Reviewed by: Doug Ambrisko
Approved by: pjd (mentor)
MFC after: 1 month
The HAL already included the STBC fields; it just needed to be exposed
to the driver and net80211 stack.
This should allow single-stream STBC TX and RX to be negotiated; however
the driver and rate control code currently don't do anything with it.
Replace the sub-optimal uma_zone_set_obj() primitive with more modern
uma_zone_reserve_kva(). The new primitive reserves before hand
the necessary KVA space to cater the zone allocations and allocates pages
with ALLOC_NOOBJ. More specifically:
- uma_zone_reserve_kva() does not need an object to cater the backend
allocator.
- uma_zone_reserve_kva() can cater M_WAITOK requests, in order to
serve zones which need to do uma_prealloc() too.
- When possible, uma_zone_reserve_kva() uses directly the direct-mapping
by uma_small_alloc() rather than relying on the KVA / offset
combination.
The removal of the object attribute allows 2 further changes:
1) _vm_object_allocate() becomes static within vm_object.c
2) VM_OBJECT_LOCK_INIT() is removed. This function is replaced by
direct calls to mtx_init() as there is no need to export it anymore
and the calls aren't either homogeneous anymore: there are now small
differences between arguments passed to mtx_init().
Sponsored by: EMC / Isilon storage division
Reviewed by: alc (which also offered almost all the comments)
Tested by: pho, jhb, davide
the firmware (instead of just the main firmware version) when evaluating
firmware compatibility. Document the new "hw.cxgbe.fw_install" knob
being introduced here.
This should fix kern/173584 too. Setting hw.cxgbe.fw_install=2 will
mostly do what was requested in the PR but it's a bit more intelligent
in that it won't reinstall the same firmware repeatedly if the knob is
left set.
PR: kern/173584
MFC after: 5 days
macro VM_OBJECT_SLEEP().
This hides some implementation details like the usage of the msleep()
primitive and the necessity to access to the lock address directly.
For this reason VM_OBJECT_MTX() macro is now retired.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
rate.
This fixes two things:
* The intermediary rates now also have their EWMA values changed;
* The existing code was using the wrong value for longtries - so the
EWMA stats were only adjusted for the first rate and not subsequent
rates in a MRR setup.
TODO:
* Merge the EWMA updates into update_stats() now..
fact, use the same values here that we use on 32-bit x86 and MIPS. Some
machines were reported to have problems with the more aggressive values.
Reported and tested by: andrew
allows userland application to use the following macros:
timespecclear, timespecisset, timespeccmp, timespecadd,
timespecsub;
timevalclear, timevalisset, timevalcmp.
MFC after: 1 month
* Remove ar5416UpdateChainmasks();
* Remove the TX chainmask override code from the ar5416 TX descriptor
setup routines;
* Write a driver method to calculate the current chainmask based on the
operating mode and update the driver state;
* Call the HAL chainmask method before calling ath_hal_reset();
* Use the currently configured chainmask in the TX descriptors rather than
the hardware TX chainmasks.
Tested:
* AR5416, STA/AP mode - legacy and 11n modes
Right now the only way to set the chainmask is to set the hardware
configured chainmask through capabilities. This is fine for forcing
the chainmask to be something other than what the hardware is capable
of (eg to reduce TX/RX to one connected antenna) but it does change what
the HAL hardware chainmask configuration is.
For operational mode changes, it (may?) make sense to separately control
the TX/RX chainmask.
Right now it's done as part of ar5416_reset.c - ar5416UpdateChainMasks()
calculates which TX/RX chainmasks to enable based on the operating mode.
(1 for legacy and whatever is supported for 11n operation.) But doing
this in the HAL is suboptimal - the driver needs to know the currently
configured chainmask in order to correctly enable things for each
TX descriptor. This is currently done by overriding the chainmask
config in the ar5416 TX routines but this has to disappear - the AR9300
HAL support requires the driver to dynamically set the TX chainmask based
on the TX power and TX rate in order to meet mini-PCIe slot power
requirements.
So:
* Introduce a new HAL method to set the operational chainmask variables;
* Introduce null methods for the previous generation chipsets;
* Add new driver state to record the current chainmask separate from
the hardware configured chainmask.
Part #2 of this will involve disabling ar5416UpdateChainMasks() and moving
it into the driver; as well as properly programming the TX chainmask
based on the currently configured HAL chainmask.
Tested:
* AR5416, STA mode - both legacy (11a/11bg) and 11n rates - verified
that AR_SELFGEN_MASK (the chainmask used for self-generated frames like
ACKs and RTSes) is correct, as well as the TX descriptor contents is
correct.
bootstrap liby. This was not readily apparent, because a normal 'make
buildworld' or 'make toolchain' builds liby before building anything
that uses yacc. However, 'make kernel-toolchain' does not build
headers or libraries, so it was not possible to build a kernel from
head on, say, stable/9 without first building the complete toolchain.
MFC after: 1 week
accessing files from various types of media nice and abstracted away from
the wet-work involved in preparing, validating, and initializing those
types of media. This will be used for the package management system module
and other modules that need access to files and want to allow the user to
decide where those files come from (either in a scripted fashion, prompted
fashion, or any combination thereof).
Heavily inspired by sysinstall and even uses the same reserved words so
that scripts are portable. Coded over months, tested continuously through-
out, and reviewed several times.
Some notes about the changes:
- Move network-setting acquisition/validation routines to media/tcpip.subr
- The options screen from sysinstall has been converted to a dialog menu
- The "UFS" media choice is renamed to "Directory" to reflect how sysinstall
treats the choice and a new [true] "UFS" media choice has been added that
acts on real UFS partitions (such as external disks with disklabels).
- Many more help files have been resurrected from sysinstall (I noticed that
some of the content seems a bit dated; I gave them a once-over but they
could really use an update).
- A total of 10 media choices are presented (via mediaGetType) including:
CD/DVD, FTP, FTP Passive, HTTP Proxy, Directory, NFS, DOS, UFS, Floppy, USB
- Novel struct/device management layer for managing the issue of passing
more information than can comfortably fit in an argument list.
currnet initialization sequence. Set it to simple mode only so that
systems can be updated from stable/7 to newer installations.
At some point, we should figure out why we cannot initialize performant
mode on this board.
PR: kern/153361
Reviewed by: scottl
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
access, birth, change and modify times of two files, instead of only
being able to compare modify times. The builtin test in sh(1) will
automagically acquire the same expansion.
Approved by: grog
MFC after: 2 weeks
