Commit Graph

5165 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
360df38e5f Be sure to not create devices with (mediasize % sectorsize) != 0.
Reported by:	xride
MFC after:	1 week
2006-10-10 15:00:32 +00:00
Pawel Jakub Dawidek
2e0ca9c4a3 Be sure to not create device which 2006-10-10 14:58:21 +00:00
Ruslan Ermilov
dadff48394 Fix markup botched in previous commit. 2006-10-10 09:44:08 +00:00
Tom Rhodes
7a6f335e14 Note that the -v option may be used to expand long SSIDs.
PR:		102118
Reviewed by:	sam
2006-10-10 02:20:12 +00:00
Tom Rhodes
1cc7aa7d96 Add a note about rule syntax compared to the shell used so users do not get
frustraited when:
ipfw add 201 deny ip from any to table(2) in via xl1
returns "Badly placed ( )'s"

PR:	73638
2006-10-09 22:12:08 +00:00
Tom Rhodes
d24dde7544 Properly separate sentences by adding a semi-colon.
Hinted by:	bmah
2006-10-07 23:12:19 +00:00
John-Mark Gurney
e0c10c6e08 flesh out the devd.conf man page... Mostly from the PR, but did a couple
gramatical tweaks along w/ sorting the list, and adding that serial is
available for USB....

PR:		85097
Submitted by:	Fredrik Lindberg
MFC after:	1 week
2006-10-07 21:15:40 +00:00
Ruslan Ermilov
04c7da702f A GEOM cache can speed up read performance by sending fixed size
read requests to its consumer.  It has been developed to address
the problem of a horrible read performance of a 64k blocksize FS
residing on a RAID3 array with 8 data components, where a single
disk component would only get 8k read requests, thus effectively
killing disk performance under high load.  Documentation will be
provided later.  I'd like to thank Vsevolod Lobko for his bright
ideas, and Pawel Jakub Dawidek for helping me fix the nasty bug.
2006-10-06 08:27:07 +00:00
Giorgos Keramidas
223ccb5450 When addr/mask examples are given, show both a host and network
address, to avoid confusing the users that a full address is
always required.

Submitted by:   Josh Paetzel <josh@tcbug.org> (through freebsd-doc)
MFC after:	3 days
2006-10-04 19:29:05 +00:00
Marcel Moolenaar
c10b34ed19 Use strtoll(3) instead of strtol(3) for the starting block or
partition size. On 32-bit platforms sizeof(long) < sizeof(off_t)
and using strtol(3) would prevent partitions larger than 4G
sectors or beyond 4G blocks.

PR: bin/103991
MFC after: 3 days
2006-10-04 18:20:25 +00:00
Jens Schweikhardt
09a66bda90 Correct some grammos. 2006-10-02 08:55:54 +00:00
Matteo Riondato
e7e3ba9bbc The UFS filesystem get created only if -P was not specified.
Specify this on the description

MFC after:	3 days
2006-10-01 09:40:55 +00:00
Ruslan Ermilov
6b4674389d Revise markup. 2006-09-30 17:21:37 +00:00
Pawel Jakub Dawidek
5e527bc0c9 MFp4: G_TYPE_BOOL sounds much better than G_TYPE_NONE.
Changes:	98722
2006-09-30 14:40:50 +00:00
Pawel Jakub Dawidek
6fc6000883 MFp4:
- Print proper error message when argument is specified twice.
  Before the change it was detected properly, because of how
  G_OPT_DONE() macro worked.
- Use err(3) functions where appropriate.
- Add some assertions.
- Bump version number, because G_TYPE_BOOL addition breaks API and ABI.

Changes:	98721,98722,98723,101360,106985
2006-09-30 14:39:18 +00:00
Pawel Jakub Dawidek
710d02a403 Add __printflike() attribute to various functions. 2006-09-30 14:35:37 +00:00
Ruslan Ermilov
975d4c58c0 Markup nit. 2006-09-30 11:12:36 +00:00
Ruslan Ermilov
bfe56fe830 Revise markup. 2006-09-30 11:02:17 +00:00
Maxim Konovalov
c24384096d o Check for a required "pathname" argument presence.
PR:		bin/95146
Submitted by:	candy-sendpr@kgc.co.jp
MFC after:	3 weeks
2006-09-29 08:00:40 +00:00
Xin LI
3a6ab3de8d Explicitly say which gid do we use as a fallback, when operator
is not found.

Suggested by:	kensmith
2006-09-27 05:49:21 +00:00
Paolo Pisati
be4f3cd0d9 Summer of Code 2005: improve libalias - part 1 of 2
With the first part of my previous Summer of Code work, we get:

-made libalias modular:

 -support for 'particular' protocols (like ftp/irc/etcetc) is no more
  hardcoded inside libalias, but it's available through external
  modules loadable at runtime

 -modules are available both in kernel (/boot/kernel/alias_*.ko) and
  user land (/lib/libalias_*)

 -protocols/applications modularized are: cuseeme, ftp, irc, nbt, pptp,
  skinny and smedia

-added logging support for kernel side

-cleanup

After a buildworld, do a 'mergemaster -i' to install the file libalias.conf
in /etc or manually copy it.

During startup (and after every HUP signal) user land applications running
the new libalias will try to read a file in /etc called libalias.conf:
that file contains the list of modules to load.

User land applications affected by this commit are ppp and natd:
if libalias.conf is present in /etc you won't notice any difference.

The only kernel land bit affected by this commit is ng_nat:
if you are using ng_nat, and it doesn't correctly handle
ftp/irc/etcetc sessions anymore, remember to kldload
the correspondent module (i.e. kldload alias_ftp).

General information and details about the inner working are available
in the libalias man page under the section 'MODULAR ARCHITECTURE
(AND ipfw(4) SUPPORT)'.

NOTA BENE: this commit affects _ONLY_ libalias, ipfw in-kernel nat
support will be part of the next libalias-related commit.

Approved by: glebius
Reviewed by: glebius, ru
2006-09-26 23:26:53 +00:00
Brooks Davis
ebe609b4a2 It is possible for bpf to return a length such that:
length != BPF_WORDALIGN(length)

This meeans that it is possible for this to be true:

	interface->rbuf_offset > interface->rbuf_len

Handle this case in the test for running out of packets.  While
OpenBSD's solution of setting interface->rbuf_len to
BPF_WORDALIGN(length) is safe due to the size of the buffer, I think
this solution results in less hidden assumptions.

This should fix the problem of dhclient running away and consuming 100%
CPU.

PR:		bin/102226
Submitted by:	Joost Bekkers <joost at jodocus.org>
MFC after:	3 days
2006-09-26 01:02:02 +00:00
Bruce M Simpson
7d9079197c Fix a typo in af_inet6.c such that IPv6 addresses may be deleted
from interfaces.

PR:		bin/102701
Submitted by:	George Mitchell
MFC after:	3 days
2006-09-25 18:20:56 +00:00
Andre Oppermann
6b92a00668 In setifcap() only set/unset those capabilities the interface actually
supports.
2006-09-20 15:38:37 +00:00
Ruslan Ermilov
8266d47670 Markup fixes. 2006-09-18 11:55:10 +00:00
Ruslan Ermilov
5ef35a9854 Add -f option to program's usage(), fix manpage's SYNOPSIS. 2006-09-17 22:49:26 +00:00
Christian Brueffer
b94ebe0fad Remove a contraction and add a missing article. 2006-09-17 11:30:44 +00:00
John Hay
268f526c05 Check the length of the ipv4 and ipv6 address lists. It must be less
than F_LEN_MASK.

MFC after:	5 days
2006-09-16 19:27:40 +00:00
Pawel Jakub Dawidek
1650d24936 Fix copy&paste mistake.
Submitted by:	Matthias Lederhofer <matled@gmx.net>
2006-09-16 10:47:30 +00:00
Pawel Jakub Dawidek
8abd1ad101 Add 'configure' subcommand which for now only allows setting and removing
of the BOOT flag. It can be performed on both attached and detached
providers.

Requested by:	Matthias Lederhofer <matled@gmx.net>
MFC after:	1 week
2006-09-16 10:43:17 +00:00
Pawel Jakub Dawidek
7330b46e36 Note that we don't destroy keys on read-only attached providers.
MFC after:	1 week
2006-09-16 09:27:54 +00:00
Pawel Jakub Dawidek
301b9004a9 First kill detached providers, because of two reasons:
- after killing all attached providers, all providers are then detached
  and operation is repeated for those who were attached,
- we don't want to remove keys for read-only attached providers, we only
  want to detach them.

MFC after:	1 week
2006-09-16 09:26:57 +00:00
John Hay
e7f2ec5364 Use bzero() to clear the whole ipfw_insn_icmp6 structure in fill_icmp6types(),
otherwise this command

ipfw add allow ipv6-icmp from any to 2002::1 icmp6types 1,2,128,129

turns into icmp6types 1,2,32,33,34,...94,95,128,129

PR:		102422 (part 1)
Submitted by:	Andrey V. Elsukov <bu7cher at yandex.ru>
MFC after:	5 days
2006-09-16 06:34:30 +00:00
Dag-Erling Smørgrav
7410947271 Fix markup snafu.
Spotted by:	ru
2006-09-14 13:47:55 +00:00
Philippe Charnier
d402d62c89 Reduce the number of errors under WARNS=6 2006-09-13 04:50:44 +00:00
Philippe Charnier
9833aeada2 Add FBSDID, rename local variable time to not conflict with time() 2006-09-12 17:54:35 +00:00
David E. O'Brien
f8c9c51988 Fix the manual build. 2006-09-10 08:58:47 +00:00
Daniel Gerzo
d6649c2569 Re-word the description of the "async" flag.
Suggested by: Milos Vyletel (mv@rulez.sk)
Reviewed by: ru
Approved by: keramida (mentor), trhodes (mentor)
2006-09-08 13:47:39 +00:00
Andre Oppermann
581d6e4ca7 Fix octal representation of TSO4 and TSO6 bits in interface capabilities
description.
2006-09-08 13:29:38 +00:00
Pawel Jakub Dawidek
6a146a1989 - Split failure probability configuration into read failure probability and
write failure probability.
- Allow to specify an error number to return of failure.

MFC after:	3 days
2006-09-08 09:21:21 +00:00
Andre Oppermann
d7097da403 Make TSO (TCP segmentation offload) capabilities visible and accessible with
'ifconfig em0 tso' and 'ifconfig em0 -tso'.  TSO for IPv4 and IPv6 is always
enabled or disabled together.  The driver may enable only one if it doesn't
support both.

Document 'tso' and '-tso' in the ifconfig(8) man pages.

Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-06 22:07:14 +00:00
Ruslan Ermilov
ccf2597759 While convenient, avoid using alloca() for reasons specified in
the BUGS section of the alloca(3) manpage.  In particular, when
the number of TCP sockets is several tens of thousand, trying to
"sysctl -a" would SIGSEGV on the net.inet.tcp.pcblist entry (it
would exceed the stacksize ulimit, in an undetectable manner).

Reported by:	Igor Sysoev
2006-09-06 20:15:43 +00:00
Hajimu UMEMOTO
d45564dcfe Support Celsius (nn.nC), Fahrenheit (nn.nF) and Kelvin (nnnn) to
specify temperature.

Reviewed by:	njl
MFC after:	3 days
2006-09-03 15:10:04 +00:00
Maxim Konovalov
0e6d65d1fd o Fix style(9) for previous. 2006-08-25 09:14:23 +00:00
Maxim Konovalov
ac5cc9e9bc A bunch of fixes from NetBSD:
o Restore owner/group/mode/atime/mtime of symbolic links, rev. 1.30.
o Extract file flags of symbolic link, rev. 1.42.
o Call getfile() before altering file attributes.
  Open file with mode 0600 instead of 0666 so that file won't remain
  group or world readable/writable even if getfile() terminated.
  Move skipfile() before altering file attributes in IF{CHR,BLK} and
  IFIFO case for symmetry, rev. 1.32.
o Use file mode 0600 when creating special file or fifo, revs. 1.33, 1.34.

o Remove redundant -N check.

PR:		bin/101660
Submitted by:	Andrey V. Elsukov
Obtained from:	NetBSD, enami@netbsd
MFC after:	6 weeks
2006-08-25 05:46:47 +00:00
Ceri Davies
c4c6a6c2b5 Add a note that the btime command only works on UFS2.
Suggested by: maxim (who had also done the btime patch independently).
2006-08-24 09:14:02 +00:00
Ceri Davies
96dd636028 Allow fsdb to manipulate the birthtime entries on UFS2.
Approved by:	jhb
MFC after:	1 month
2006-08-23 22:44:00 +00:00
David Malone
cb0bfd9b89 A pipe bandwidth of 10MBits/s should probably
be understood as    10Mbits/s not 10MBytes/s.

Submitted by:	Gavin McCullagh <gavin.mccullagh@nuim.ie>
MFC after:	1 week
2006-08-23 14:29:18 +00:00
Thomas Quinot
68e160886a (media_status): Factor common code between IFM_ETHER and IFM_ATM cases.
(print_media_word, print_media_word_ifconfig): Remove unnecessary
goto following test for null desc.

PR:		bin/102354
Submitted by:	Ricardo Nabinger Sanchez <rnsanchez@gmail.com>
MFC after:	1 week
2006-08-22 23:49:36 +00:00
Ruslan Ermilov
2b46c64c9c Remove alpha left-overs. 2006-08-22 08:03:01 +00:00