rev. 1.68, author: mycroft
Ignore a port error that happens to come in at the same time as a
connect status change. Some root hubs seem to report both.
Obtained from: NetBSD
bus interfaces. These interfaces use the FTDI chipset with different
Vendor and Product IDs.
Add two additional baud rate enumerations. The vehicle bus interfaces
use a baud rate of 2000000. Also add 3000000 as it is the other FTDI
baud divisor special case.
I've commited a slightly different patch from that provided in the PR as
I changed the matching code a bit yesterday.
Submitted by: Mike Durian <durian at shadetreesoftware.com>
PR: kern/67357
operations when the refcount doesn't protect the opens and closes. Fix
this, and don't actually let a time out happen: now ugen(4) devices do
not get freed out from under the programs with them open.
instead of a mutex so we do not unblock it in msleep(). If we do this,
another event could occur, resetting the status register since reads
reset it. While I'm here, remove the backoff approach. Instead, sleep
in 10 ms chunks for up to the configured timeout using either DELAY (if
we aren't booted yet) or tsleep.
Help from: dillon
Tested by: Andrew Thompson andy AT fud.org.nz
Unify the code to disable GPEs with the enable code. Shutdown is handled
the same way. ACPI now does all wake/sleep prep for child devices so
now they no longer need to call external functions in the suspend/resume
path. Add the flags to non-ACPI busses (i.e., pci).
This brings us into line with the standard, which requires power resources
be enabled when wake is enabled for a given device. Move the dereferencing
code into its own function, +acpi_pwr_dereference_resource().
code that was never really used. Print a message when disabling ACPI via
a quirk. Allow the user to override the blacklist decision by setting
hint.acpi.0.disabled="0". Add missing AcpiTerminate() calls; they are
needed to clean up if bailing out after AcpiInitializeSubsystem().
PCI native addressing. That means that if the HW says that using "real"
addresses instead of the hardwired legacy compat ones is allowed, we will
use them.
namespace. This is to allow decoupling of attachments from ACPI where they
need some functionality when ACPI is present but do not want to require ACPI
to always be loaded.
Add Intel Pro100Lan56 card.
Also integrate changes from Carlos Velasco. Only attch if we're a
network device (to filter out the serial devices). Also, increment
vpmatch if we match to conform to the pccard match function api.
Use bus space rather than direct inb/outb. Minor style changes while
I'm here. Extremely preliminary support for siliconix ethernet cards
(but more work is required).
The hack for setting the bus has been moved down into the cbb driver.
I've been running without this hack in my tree for so long I had
forgotten that I'd removed it :-). Please let me know if this causes
difficulty for your laptop.
starting value. This is more pedantically correct (since the handle
isn't always identical to the start of the resource) and also doesn't
access the innards of struct resource direct (which I forbid in my
tree). We need to do this for all resource types, not just ioport.
Reviewed by: njl
uhid.c (1.61), author: jdolecek
add support for USB_GET_DEVICEINFO and USB_GET_STRING_DESC ioctls,
with same meaning as for ugen(4)
usbdi_util.h (1.29), usb_quirks.c (1.50), uhid.c (1.62),
ugen.c (1.68), usb_subr.c (1.114) author: mycroft
Yes, some devices return incorrect lengths in their string
descriptors. Rather than losing, do what Windows does: just
request the maximum size, and allow a shorter response. Obsoletes
the need for UQ_NO_STRINGS, and therefore these "quirks" are removed.
usb_subr.c (1.116), author: mycroft
In the "seemed like a good idea until I found the fatal flaw"
department... Attempting to read a maximum-size string descriptor
causes my kue device to go completely apeshit. So, go back to the
original method, but allow the device to return a shorter string than
it claimed.
Obtained from: NetBSD
copies.
No current line disciplines have a dynamically changing hotchar, and
expecting to receive anything sensible during a change in ldisc is
insane so no locking of the hotchar field is necessary.
ohci.c (1.147), author: mycroft
Failure to properly mask off UE_DIR_IN from the endpoint address
was causing OHCI_ED_FORMAT_ISO and EHCI_QH_HRECL to get set
spuriously, causing rather interesting lossage.
Suddenly I get MUCH better performance with ehci...
ohci.c (1.148), author: mycroft
Adjust a couple of comments to make it clear WTF is going on.
Obtained from: NetBSD
ehci.c (1.55), ehcireg.h (1.16); author: mycroft
Set the data toggle correctly, and use EHCI_QTD_DTC. This fixes
problems with my ALi-based drive enclosure (it works now, rather
than failing to attach). Also seems to work with a GL811-based
enclosure and an ASUS enclosure with a CD-RW, on both Intel and
NEC controllers.
Note: The ALi enclosure is currently very SLOW, due to some issue
with taking too long to notice that the QTD is complete. This
requires more investigation.
ehci.c (1.56); author: mycroft
Failure to properly mask off UE_DIR_IN from the endpoint address
was causing OHCI_ED_FORMAT_ISO and EHCI_QH_HRECL to get set
spuriously, causing rather interesting lossage.
Suddenly I get MUCH better performance with ehci...
ehci.c (1.58); author: mycroft
Fix a stupid bug in ehci_check_intr() that caused use to try to
complete a transaction that was still running. Now ehci can
handle multiple devices being active at once.
ehci.c (1.59); author: enami
As the ehci_idone() now uses the variable `epipe'
unconditionally, always declare it (in other words, make this
file compile w/o EHCI_DEBUG).
ehci.c (1.60); author: mycroft
Remove comment about the data toggle being borked.
ehci.c (1.61); author: mycroft
Update comment.
ehci.c (1.62); author: mycroft
Adjust a couple of comments to make it clear WTF is going on.
ehci.c (1.63); author: mycroft
Fix an error in a debug printf().
ehci.c (1.64), ehcireg.h (1.17); author: mycroft
Further cleanup of toggle handling. Now that we use EHCI_QH_DTC,
we don't need to fiddle with the TOGGLE bit in the overlay
descriptor, so minimize how much we fuss with it.
Obtained from: NetBSD
Thanks to Sam for importing tags in a way that allowed this to be done.
Submitted by: Gleb Smirnoff <glebius@cell.sick.ru>
Also allow the sr and ar drivers to create netgraph versions of their modules.
Document the change to the ksocket node.
are currently all bad BIOS revisions that will never be able to support
ACPI. They were derived by examining which BIOS's are blacklisted by other
operating systems. Other types of quirks will be possible here as well.
Ultra2 users may want to set OFWCONS_POLL_HZ to a value of '20'.
I have left default value at '4' as higher values can consume a more
than is acceptable amount of CPU, and we don't have a consensus yet
what is an optimal value.
Submitted by: Pyun YongHyeon <yongari@kt-is.co.kr>
smp_rendezvous() to ensure we run on the BSP. This reverts rev 1.128.
Add a comment indicating that MI code should be the one that runs all
shutdown functions on the BSP with the APs halted. This should work
around problems in power off while waiting for the MI code to be improved.
actually used. For most ACPI devices this means deferring the call
until bus_alloc_resource().
- Add a function acpi_config_intr() to call BUS_CONFIG_INTR() for an
ACPI IRQ resource using the trigger mode and polarity information
stored in the ACPI resource object.
- Add a function acpi_lookup_irq_resource() to lookup the ACPI IRQ
resource that corresponds to a specified rid and new-bus resource.
- Have the ACPI PCI bridge driver call BUS_CONFIG_INTR() on interrupts
that it routes through link devices.
- Remove needactivate variable from acpi_alloc_resource() by changing the
function not modify the flags variable but just mask off RF_ACTIVE when
calling rman_reserve_resource().
Reviewed by: njl (1, an earlier version)
device associated with any PCI devices that are enumerated in the ACPI
tree when adding children to an ACPI PCI bus and remove the duplicate
ACPI-only device_t and replace the device_t associated with the handle with
the ACPI and PCI aware device_t.
Several changes:
* Implement read for ulpt.
* If the device is not opened for reading, occasionally drain any
data the printer might have (but don't hammer the printer with reads).
* Lower the buffer size to one page.
The driver seems to work with more printers now.
Obtained from: NetBSD
the GEOM topology.
There are still issues with not detaching from cam correctly such that
upon a device detach there's an invalid pointer dereference from the
later call to cam_rescan().
that are on a CISS bus to be exported up to CAM and made available as normal
devices. This will typically add one or two buses to CAM, which will be
numbered starting at 32 to allow room for CISS proxy buses. Also, the CISS
firmware usually hides disk devices, but these can also be exposed as 'pass'
devices if you set the hw.ciss.expose_hidden_physical tunable.
Sponsored by: Tape Laboratories, Inc.
MFC After: 3 days
