1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
cleanilinks wasn't listed in <bsd.subdir.mk>. Instead of adding it to
/sys/modules/Makefile, we'd better just add it to <bsd.subdir.mk>
directly, so we don't need to change files like /sys/modules/sound/Makefile
as well. This means you can finally clean up all those dangling symlinks
created by individual module compilation at once.
to `:', so that it stays compatible with a stale dependency recorded in
.depend when the type of "foo" changes from file to directory or back.
Compensate for the loss of the "If no sources are specified, the target
is always re-created" feature by marking these targets with the .PHONY
attribute. While here, fix a bug in the target's script (nobody uses
these targets apparently).
additional targets that will cause descending into subdirs.
Example:
cd /sys/modules; make load SUBDIR_TARGETS=load
(But don't try it with your pet.)
Submitted by: Alexey Klimov
PR: 47601
the US Senate, Canadian Parliament and Australian Senate, it was
causing some confusion. After some consultation with Mark Murray,
change this to 'without objection' since often times a plain-speaking
term is preferable to a regionally used term.
Also, clarify that this procedure is to be used when for more mundane
matters that need a sanity check, but don't need the whole, ponderous
voting proceedure that more difficult issues require. Core members
that read email in any given 48 hour period are trusted enough to know
the difference and to provide the sanity check as necessary.
Reviewed by: markm
given -n. For POLA reasons this behaviour is switched on only when
at least two -n flags are given to make. One -n flag keeps the old behaviour
of showing the shell command that would recurse into the sub-directories.
Discussed with: ru
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
to use ``.if defined()'' inside bsd.own.mk to test for defines
in individual makefiles. For example, setting DEBUG_FLAGS in
Makefile didn't take the desired effect on the STRIP assignment.
Added bsd.init.mk (like in NetBSD) that handles the inclusion
of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that
"build something".
Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back
to sys.mk (several source tree makefiles want to check it early)
and removed MACHINE_ARCH initialization (it's hard to see from
looking at the commitlogs what the problem was at the time, but
now it serves no purpose).
Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk.
Protect bsd.obj.mk from repetitive inclusion. Prohibiting the
direct inclusion of bsd.obj.mk might be a good idea too.
Small tweaks to kldxref may be necessary to avoid the surprising (but harm-
less) behaviour of 'kldload foo' loading foo.ko.debug instead of foo.ko if
it is present in the kernel directory.
Approved by: a week of silence on -arch
MFC after: 2 weeks
All Makefiles now use MACHINE_ARCH for the target architecture.
Unification is required for cross-building.
Tags added to:
sys/boot/Makefile
sys/boot/arc/loader/Makefile
sys/kern/Makefile
usr.bin/cpp/Makefile
usr.bin/gcore/Makefile
usr.bin/truss/Makefile
usr.bin/gcore/Makefile:
fixed typo: MACHINDE -> MACHINE_ARCH
when certain .mk files include other .mk files. This will remove the
need for multiple include protection in some other makefiles around the
tree (and helps some elf conditionals).
'make -j3 world' works
Jordan points out that this may not be the only place this is required to be
added, but so far, its the only one I've found to break -j3
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
put the stuff into the right "distribution". As default things end up
in "bindist".
Normal (ie: most) makefiles know naught of this.
More commits will follow, which will direct various parts of the tree
into the distribution we want them in.
Some of the grief of being release-engineer is supposed to go away with this.
