errors have been detected in a particular run.
Clean up the global state variables so that a restart can happen correctly.
Separate the global variables in fsck_ffs and fsdb to their own file. This
fixes header sharing with fscd.
Correctly initialize, static-ize, and remove global variables as needed in
dir.c. This fixes a problem with lost+found directories that was causing
a segfault.
Correctly initialize, static-ize, and remove global variables as needed in
suj.c.
Initialize the suj globals before allocating the disk object, not after.
Also ensure that 'preen' mode doesn't conflict with 'restart' mode
Submitted by: scottl, max
Reviewed by: max, mckusick (earlier version)
Obtained from: Netflix
MFC after: 3 days
Clang errors around printf could be trivially fixed, but the breakage in
sbin/fsdb were to significant for this type of change.
Submitter of this changeset has been notified and hopefully this can be
restored soon.
that they do not need to be read again in pass5. As this nearly
doubles the memory requirement for fsck, the cache is thrown away
if other memory needs in fsck would otherwise fail. Thus, the
memory footprint of fsck remains unchanged in memory constrained
environments.
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
that was built before ffs grew support for TRIM, your filesystem will have
plenty of free blocks that the flash chip doesn't know are free, so it
can't take advantage of them for wear leveling. Once you've upgraded your
kernel, you enable TRIM on the filesystem (tunefs -t enable), then run
fsck_ffs -E on it before mounting it.
I tested this patch by half-filling an mdconfig'ed filesystem image,
running fsck_ffs -E on it, then verifying that the contents were not
damaged by comparing them to a pristine copy using rsync's checksum
functionality. There is no reliable way to test it on real hardware.
Many thanks to mckusick@, who provided the tricky parts of this patch and
reviewed the final version.
Reviewed by: mckusick@
MFC after: 3 weeks
cylinder group of a UFS1 filesystem as bad. The error was in the check
and not in the cylinder group itself. So even though fsck fixed the
cylinder group correctly, it was still endlessly reported as bad.
PR: 141992
MFC after: 2 weeks
Reported by: Dan Strick
robust. With these changes fsck is now able to detect and reliably
rebuild corrupted cylinder group maps. The -D option is no longer
necessary as it has been replaced by a prompt asking whether the
corrupted cylinder group should be rebuilt and doing so when requested.
These actions are only offered and taken when running fsck in manual
mode. Corrupted cylinder groups found during preen mode cause the fsck
to fail.
Add the -r option to free up excess unused inodes. Decreasing the
number of preallocated inodes reduces the running time of future
runs of fsck and frees up space that can allocated to files. The -r
option is ignored when running in preen mode.
Reviewed by: Xin LI <delphij@>
Sponsored by: Rsync.net
catastrophic recovery. Currently, this mode only validates whether a
cylindergroup has good signature data, and prompts the user to decide
whether to clear it as a whole.
This mode is useful when there is data damage on a disk and you are
working on copy of the original disk, as fsck_ffs(8) tends to abnormally
exit in such case, as a last resort to recover data from the disk.
and -p flag was given perform fast file system checking (bascially only
garbage collecting of orphaned objects).
Rename bread() to blread() and bwrite() to blwrite() as we now link to
the libufs library, which also implement functions with that names.
Sponsored by: home.pl
count of zero and instead encode this information in the inode state.
Pass 4 performed a linear search of this list for each inode in
the file system, which performs poorly if the list is long.
Reviewed by: sam & keramida (an earlier version of the patch), mckusick
MFC after: 1 month
shuffles the timing and sleep calls in bgfsck from:
sleep timer_on io timer_off io io io io io io io
to
sleep io io io io io io io timer_on io timer_off
The original method basically guaranteed that the timed I/O included a
disk seek every time, which made bgfsck sleep for much longer than
necessary.
Submitted by: Dan Nelson
Reviewed by: kirk
bandwidth for other processes. Since the sleeping is done from
userland, this avoids the locking issues that affected the kernel
version.
The algorithm used here is to measure a moving average of the times
taken by a sample of read operations and then delay 1 in 8 reads
by 16 times the measured average. This should correspond to a factor
of 3 slowdown, but in practice the factor is larger (3.5 to 4) due
to hz rounding effects.
Reviewed by: mckusick
Approved by: re
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
"register" -- just how many free registers do people think machines have?)
These were mainly missing casts or wrong format strings in printf
statements, but there were also missing includes, unused variables,
functions and arguments.
The choice of `long' vs `int' still seems almost random in a lot
of places though.
filesystem needs foreground checking (usually at boot time) or
can defer to background checking (after the system is up and running).
See the manual page, fsck_ffs(8), for details on the -F and -B options.
These options are primarily intended for use by the fsck front end.
All output is directed to stdout so that the output is coherent
when redirected to a file or a pipe. Unify the code with the fsck
front end that allows either a device or a mount point to be
specified as the argument to be checked.
1) Set the FS_NEEDSFSCK flag when unexpected problems are encountered.
2) Clear the FS_NEEDSFSCK flag after a successful foreground cleanup.
3) Refuse to run in background when the FS_NEEDSFSCK flag is set.
4) Avoid taking and removing a snapshot when the filesystem is already clean.
5) Properly implement the force cleaning (-f) flag when in preen mode.
Note that you need to have revision 1.21 (date: 2001/04/14 05:26:28) of
fs.h installed in <ufs/ffs/fs.h> defining FS_NEEDSFSCK for this to compile.
affect current systems until fsck is modified to use these new
facilities. To try out this change, set the fsck passno to zero
in /etc/fstab to cause the filesystem to be mounted without running
fsck, then run `fsck_ffs -p -B <filesystem>' after the system has
been brought up multiuser to run a background cleanup on <filesystem>.
Note that the <filesystem> in question must have soft updates enabled.
