The magic number MSDOSFS_ARGSMAGIC, which used to distinguish
"old" vs "new" msdosfs mount arguments, has not been used since
2005; it should just go away now.
Likewise, the local-to-Unicode table that changed at the same
time is unused.
Leave the space reserved in the old style mount arguments, though,
since we still support the old mount call (via the cmount entry
point).
Submitted by: Chris Torek <chris.torek@gmail.com>
MFC after: 2 weeks
There are a number of msdosfs improvements in NetBSD that may be worth
bringing over, and this reduces noise in the comparison.
Differential Revision: https://reviews.freebsd.org/D1466
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Since VFS does not/cannot stop writes, sync might run indefinitely, or
be a wrong thing to do at all. E. g. NFS ignores VFS_SYNC() for
forced unmounts, since non-responding server does not allow sync to
finish. On the other hand, filesystems can and do stop writes using
fs-specific facilities, and should already fully flush caches in
VFS_UNMOUNT() due to the race.
Adjust msdosfs tp sync in unmount for forced call, to accomodate the
new behaviour. Note that it is still racy, since writes are not
stopped.
Discussed with: avg, bjk, mckusick
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
survives remount in rw, also it is set for vnodes on rootfs before
noatime can be set or clock is adjusted. All conditions result in
wrong atime for accessed vnodes.
Submitted by: bde
MFC after: 1 week
producer, instead of hard-coding VFS_VGET(). New function, which
takes callback, is called vn_get_ino_gen(), standard callback for
vn_get_ino() is provided.
Convert inline copies of vn_get_ino() in msdosfs and cd9660 into the
uses of vn_get_ino_gen().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
permissions test, forgotten in r164033.
Refactor the permission checks for utimes(2) into vnode helper
function vn_utimes_perm(9), and simplify its code comparing with the
UFS origin, by writing the call to VOP_ACCESSX only once. Use the
helper for UFS(5), tmpfs(5), devfs(5) and msdosfs(5).
Reported by: bde
Reviewed by: bde, trasz
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
disk. That has a side effect of corrupting the "." entries names on
rename, since the call to createde() in the msdosfs_rename() sets the
de_Name to the target name. If any change to the directory attributes
is performed, the wrong name is written back to the on-disk direntry
on update.
Overwrite the de_Name for the directories on rename to correct the dot
name.
Submitted by: bde
MFC after: 1 week
and CIFS file attributes as BSD stat(2) flags.
This work is intended to be compatible with ZFS, the Solaris CIFS
server's interaction with ZFS, somewhat compatible with MacOS X,
and of course compatible with Windows.
The Windows attributes that are implemented were chosen based on
the attributes that ZFS already supports.
The summary of the flags is as follows:
UF_SYSTEM: Command line name: "system" or "usystem"
ZFS name: XAT_SYSTEM, ZFS_SYSTEM
Windows: FILE_ATTRIBUTE_SYSTEM
This flag means that the file is used by the
operating system. FreeBSD does not enforce any
special handling when this flag is set.
UF_SPARSE: Command line name: "sparse" or "usparse"
ZFS name: XAT_SPARSE, ZFS_SPARSE
Windows: FILE_ATTRIBUTE_SPARSE_FILE
This flag means that the file is sparse. Although
ZFS may modify this in some situations, there is
not generally any special handling for this flag.
UF_OFFLINE: Command line name: "offline" or "uoffline"
ZFS name: XAT_OFFLINE, ZFS_OFFLINE
Windows: FILE_ATTRIBUTE_OFFLINE
This flag means that the file has been moved to
offline storage. FreeBSD does not have any special
handling for this flag.
UF_REPARSE: Command line name: "reparse" or "ureparse"
ZFS name: XAT_REPARSE, ZFS_REPARSE
Windows: FILE_ATTRIBUTE_REPARSE_POINT
This flag means that the file is a Windows reparse
point. ZFS has special handling code for reparse
points, but we don't currently have the other
supporting infrastructure for them.
UF_HIDDEN: Command line name: "hidden" or "uhidden"
ZFS name: XAT_HIDDEN, ZFS_HIDDEN
Windows: FILE_ATTRIBUTE_HIDDEN
This flag means that the file may be excluded from
a directory listing if the application honors it.
FreeBSD has no special handling for this flag.
The name and bit definition for UF_HIDDEN are
identical to the definition in MacOS X.
UF_READONLY: Command line name: "urdonly", "rdonly", "readonly"
ZFS name: XAT_READONLY, ZFS_READONLY
Windows: FILE_ATTRIBUTE_READONLY
This flag means that the file may not written or
appended, but its attributes may be changed.
ZFS currently enforces this flag, but Illumos
developers have discussed disabling enforcement.
The behavior of this flag is different than MacOS X.
MacOS X uses UF_IMMUTABLE to represent the DOS
readonly permission, but that flag has a stronger
meaning than the semantics of DOS readonly permissions.
UF_ARCHIVE: Command line name: "uarch", "uarchive"
ZFS_NAME: XAT_ARCHIVE, ZFS_ARCHIVE
Windows name: FILE_ATTRIBUTE_ARCHIVE
The UF_ARCHIVED flag means that the file has changed and
needs to be archived. The meaning is same as
the Windows FILE_ATTRIBUTE_ARCHIVE attribute, and
the ZFS XAT_ARCHIVE and ZFS_ARCHIVE attribute.
msdosfs and ZFS have special handling for this flag.
i.e. they will set it when the file changes.
sys/param.h: Bump __FreeBSD_version to 1000047 for the
addition of new stat(2) flags.
chflags.1: Document the new command line flag names
(e.g. "system", "hidden") available to the
user.
ls.1: Reference chflags(1) for a list of file flags
and their meanings.
strtofflags.c: Implement the mapping between the new
command line flag names and new stat(2)
flags.
chflags.2: Document all of the new stat(2) flags, and
explain the intended behavior in a little
more detail. Explain how they map to
Windows file attributes.
Different filesystems behave differently
with respect to flags, so warn the
application developer to take care when
using them.
zfs_vnops.c: Add support for getting and setting the
UF_ARCHIVE, UF_READONLY, UF_SYSTEM, UF_HIDDEN,
UF_REPARSE, UF_OFFLINE, and UF_SPARSE flags.
All of these flags are implemented using
attributes that ZFS already supports, so
the on-disk format has not changed.
ZFS currently doesn't allow setting the
UF_REPARSE flag, and we don't really have
the other infrastructure to support reparse
points.
msdosfs_denode.c,
msdosfs_vnops.c: Add support for getting and setting
UF_HIDDEN, UF_SYSTEM and UF_READONLY
in MSDOSFS.
It supported SF_ARCHIVED, but this has been
changed to be UF_ARCHIVE, which has the same
semantics as the DOS archive attribute instead
of inverse semantics like SF_ARCHIVED.
After discussion with Bruce Evans, change
several things in the msdosfs behavior:
Use UF_READONLY to indicate whether a file
is writeable instead of file permissions, but
don't actually enforce it.
Refuse to change attributes on the root
directory, because it is special in FAT
filesystems, but allow most other attribute
changes on directories.
Don't set the archive attribute on a directory
when its modification time is updated.
Windows and DOS don't set the archive attribute
in that scenario, so we are now bug-for-bug
compatible.
smbfs_node.c,
smbfs_vnops.c: Add support for UF_HIDDEN, UF_SYSTEM,
UF_READONLY and UF_ARCHIVE in SMBFS.
This is similar to changes that Apple has
made in their version of SMBFS (as of
smb-583.8, posted on opensource.apple.com),
but not quite the same.
We map SMB_FA_READONLY to UF_READONLY,
because UF_READONLY is intended to match
the semantics of the DOS readonly flag.
The MacOS X code maps both UF_IMMUTABLE
and SF_IMMUTABLE to SMB_FA_READONLY, but
the immutable flags have stronger meaning
than the DOS readonly bit.
stat.h: Add definitions for UF_SYSTEM, UF_SPARSE,
UF_OFFLINE, UF_REPARSE, UF_ARCHIVE, UF_READONLY
and UF_HIDDEN.
The definition of UF_HIDDEN is the same as
the MacOS X definition.
Add commented-out definitions of
UF_COMPRESSED and UF_TRACKED. They are
defined in MacOS X (as of 10.8.2), but we
do not implement them (yet).
ufs_vnops.c: Add support for getting and setting
UF_ARCHIVE, UF_HIDDEN, UF_OFFLINE, UF_READONLY,
UF_REPARSE, UF_SPARSE, and UF_SYSTEM in UFS.
Alphabetize the flags that are supported.
These new flags are only stored, UFS does
not take any action if the flag is set.
Sponsored by: Spectra Logic
Reviewed by: bde (earlier version)
system crash which happen after successfull fsync() return, the data
is accessible. For msdosfs, this means that FAT entries for the file
must be written.
Since we do not track the FAT blocks containing entries for the
current file, just do a sloppy sync of the devvp vnode for the mount,
which buffers, among other things, contain FAT blocks.
Simultaneously, for deupdat():
- optimize by clearing the modified flags before short-circuiting a
return, if the mount is read-only;
- only ignore the rest of the function for denode with DE_MODIFIED
flag clear when the waitfor argument is false. The directory buffer
for the entry might be of delayed write;
- microoptimize by comparing the updated directory entry with the
current block content;
- try to cluster the write, fall back to bawrite() if low on
resources.
Based on the submission by: bde
MFC after: 2 weeks
cluster_write() and cluster_wbuild() functions. The flags to be
allowed are a subset of the GB_* flags for getblk().
Sponsored by: The FreeBSD Foundation
Tested by: pho
is excessive. Postpone the flush of the fsinfo to VFS_SYNC(),
remembering the need for update with the flag MSDOSFS_FSIMOD, stored
in pm_flags.
FAT32 specification describes both FSI_Free_Count and FSI_Nxt_Free as
the advisory hints, not requiring them to be correct.
Based on the patch from bde, modified by me.
Reviewed by: bde
MFC after: 2 weeks
track the MNT_SYNCHRONOUS flag. It is set to the latter at mount time
but not updated by MNT_UPDATE.
Use MNT_SYNCHRONOUS to decide to write the FAT updates syncrhonously.
Submitted by: bde
MFC after: 1 week
a directory to a subdir of the root directory from somewhere else.
For all directory moves that change the parent directory, the dotdot
entry must be fixed up. For msdosfs, the root directory is magic for
non-FAT32. It is less magic for FAT32, but needs the same magic for
the dotdot fixup. It didn't have it.
Both chkdsk and fsck_msdosfs fix the corrupt directory entries with no
problems.
The fix is to use the same magic for dotdot in msdosfs_rename() as in
msdosfs_mkdir().
For msdosfs_mkdir(), document the magic. When writing the dotdot entry
in mkdir, use explicitly set pcl variable instead on relying on the
start cluster of the root directory typically has a value < 65536.
Submitted by: bde
MFC after: 1 week
Trying FAT32 on a small partition failed to mount because
pmp->pm_Sectors was nonzero. Normally, FAT32 file systems are so
large that the 16-bit pm_Sectors can't hold the size. This is
indicated by setting it to 0 and using only pm_HugeSectors. But at
least old versions of newfs_msdos use the 16-bit field if possible,
and msdosfs supports this except for breaking its own support in the
sanity check. This is quite different from the handling of pm_FATsecs
-- now the 16-bit value is always ignored for FAT32 except for
checking that it is 0, and newfs_msdos doesn't use the 16-bit value
for FAT32.
Submitted by: bde
MFC after: 1 week
received granular locking) but the comment present in UFS has been
copied all over other filesystems code incorrectly for several times.
Removes comments that makes no sense now.
Reviewed by: kib
MFC after: 3 days
a mount point. Active vnodes are those with a non-zero use or hold
count, e.g., those vnodes that are not on the free list. Note that
this list is in addition to the list of all the vnodes associated
with a mount point.
To avoid adding another set of linkage pointers to the vnode
structure, the active list uses the existing linkage pointers
used by the free list (previously named v_freelist, now renamed
v_actfreelist).
This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops
over just the active vnodes associated with a mount point (typically
less than 1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
The primary changes are that the user of the interface no longer
needs to manage the mount-mutex locking and that the vnode that
is returned has its mutex locked (thus avoiding the need to check
to see if its is DOOMED or other possible end of life senarios).
To minimize compatibility issues for third-party developers, the
old MNT_VNODE_FOREACH interface will remain available so that this
change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH
will be removed in head.
The reason for this update is to prepare for the addition of the
MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the
active vnodes associated with a mount point (typically less than
1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
32 bits to 64 bits and eliminates the unused mnt_xflag field. The
existing mnt_flag field is completely out of bits, so this update
gives us room to expand. Note that the f_flags field in the statfs
structure is already 64 bits, so the expanded mnt_flag field can
be exported without having to make any changes in the statfs structure.
Approved by: re (bz)
method, so that callers can indicate the minimum vnode
locking requirement. This will allow some file systems to choose
to return a LK_SHARED locked vnode when LK_SHARED is specified
for the flags argument. This patch only adds the flag. It
does not change any file system to use it and all callers
specify LK_EXCLUSIVE, so file system semantics are not changed.
Reviewed by: kib
root directory of msdosfs mount. The VFS code would handle deletion
case itself too, assuming VV_ROOT flag is not lost. The msdosfs_rename()
should also note attempt to rename root via doscheckpath() or different
mount point check leading to EXDEV. Nonetheless, keep the checks for now.
The change is inspired by NetBSD change referenced in PR, but return
EBUSY like kern_unlinkat() does.
PR: kern/152079
MFC after: 1 week
and vop_reclaim() methods. They seems to be unused, and the reported
situation is normal for the forced unmount.
MFC after: 1 week
X-MFC-note: keep prtactive symbol in vfs_subr.c
breakage for old mount(2) syscall, since most struct <filesystem>_args
embed export_args. The mount(2) is supposed to provide ABI
compatibility for pre-nmount mount(8) binaries, so restore ABI to
pre-r184588.
Requested and reviewed by: bde
MFC after: 2 weeks
a single directory entry. As a consequnce, name cache purge done by lookup
for fvp when DELETE op for namei is specified, might be not enough to
expunge all namecache entries that were installed for this direntry.
Explicitely call cache_purge(fvp) when msdosfs_rename() succeeded.
PR: kern/93634
MFC after: 1 week
