Commit Graph

8 Commits

Author SHA1 Message Date
Justin T. Gibbs
a02f9953f0 Revert AHD_TIMER_MAX_US to its original definition now that the
ahc and ahd modules have correct dependencies on the assembler.
2003-01-22 22:00:07 +00:00
Poul-Henning Kamp
c6eeff600d Bandaid to make the kernel compile until the scsi-crew can find out what
is happening.
2003-01-21 10:31:43 +00:00
Justin T. Gibbs
0794987d01 aic79xx.c:
Implement the SCB_SILENT flag.  This is useful for
	hushing up the driver during DV or other operations
	that we expect to cause transmission errors.  The
	messages will still print if the SHOW_MASKED_ERRORS
	debug option is enabled.

	Save and restore the NEGOADDR address when setting
	new transfer settings.  The sequencer performs lookups
	in the negotiation table too and it expects NEGOADDR
	to remain consistent across pause/unpause sessions.

	Consistently use "offset" instead of "period" to determine
	if we are running sync or not.

	Add a SHOW_MESSAGES diagnostic for when we assert ATN
	during message processing.

	Print out IU, QAS, and RTI features when showing transfer options.

	Limit the syncrate after all option conformance
	changes have taken place in ahd_devlimited_syncrate.
	Changes in options may change the final syncrate we
	accept.

	Keep a copy of the hs_mailbox in our softc so that
	we can perform read/modify/write operations on the
	hs_mailbox without having to pause the sequencer to
	read the last written value.  Use the ENINT_COALESS
	flag in the hs_mailbox to toggle interrupt coalessing.

	Add entrypoints for enabling interrupt coalessing and
	setting both a timeout (how long to wait for commands
	to be coalessed) and a maximum commands to coaless value.
	Add a statistics timer that decides when to enable or
	disable interrupt coalessing based on load.

	Add a routine, ahd_reset_cmds_pending() which is used
	to update the CMDS_PENDING sequencer variable whenever
	error recovery compeltes SCBs without notifying the
	sequencer.  Since ahd_reset_cmds_pending is called
	during ahd_unpause() only if we've aborted SCBs, its
	call to ahd_flush_qoutfifo should not cause recursion
	through ahd_run_qoutfifo().  A panic has been added to
	ensure that this recursion does not occur.

	In ahd_search_qinfifo, update the CMDS_PENDING sequencer
	variable directly.  ahd_search_qinififo can be called
	in situations where using ahd_reset_cmds_pending() might
	cause recursion.  Since we can safely determine the
	exact number to reduce CMDS_PENDING by in this scenario
	without running the qoutfifo, the manual update is sufficient.

	Clean up diagnostics.
	Add ahd_flush_qoutfifo() which will run the qoutfifo
	as well as complete any commands sitting on the
	sequencer's COMPLETE_SCB lists or the good status FIFO.
	Use this routine in several places that did similar
	things in an add-hoc, but incomplete, fashion.  A call
	to this routine was also added to ahd_abort_scbs() to
	close a race.

	In ahd_pause_and_flushwork() only return once selections
	are safely disabled.  Flush all completed commands via
	ahd_flush_qoutfifo().

	Remove "Now packetized" diagnostic now that this
	information is incorperated into the actual negotiation
	messages that are displayed.

	When forcing renegotiation, don't clober the current
	ppr_options.  Much of the driver uses this information
	to determine if we are currently packetized or not.

	Remove some stray spaces at column 1 in ahd_set_tags.

	When complaining about getting a host message loop
	request with no pending messages, print out the
	SCB_CONTROL register down on the card.

	Modify the ahd_sent_msg() routine to handle a search
	for an outgoing identify message.  Use this to detect
	a msg reject on an identify message which typically
	indicates that the target thought we were packetized.
	Force a renegotiation in this case.

	In ahd_search_qinfifo(), wait more effectively for SCB
	DMA activities to cease.  We also disable SCB fetch
	operations since we are about to change the qinfifo
	and any fetch in progress will likely be invalidated.

	In ahd_qinfifo_count(), fix the qinfifo empty case.

	In ahd_dump_card_state(), print out CCSCBCTL in the
	correct mode.

	If we are a narrow controller, don't set the current
	width to unknown when forcing a future negotiation.
	This just confuses the code into attempting a wide
	negotiation on a narrow bus.

	Add support for task management function completions.

	Modify ahd_handle_devreset so that it can handle
	lun resets in addition to target resets.  Use
	ahd_handle_devreset for lun and target reset task
	management functions.

	Handle the abort task TMF race case better.  We now
	wait until any current selections are over and then
	set the TMF back to zero.  This should cause the sequencer
	to ignore the abort TMF completion should it occur.

	Correct a bug in the illegal phase handler that
	caused us to drop down to narrow when handling the
	unexpected command phase case after 3rd party
	reset of a packetized device.

	Indicate the features, bugs, and flags set in the softc
	that are used to control firmware patch download when
        booting verbose.

aic79xx.h:
	Add coalessing and HS_MAILBOX fields.

	Add per-softc variables for the stats "daemon".

	Add a debug option for interrupt coalessing activities.

	Add two new softc flags:
	o AHD_UPDATE_PEND_CMDS
	  Run ahd_reset_cmds_pending() on the next unpause.

	o AHD_RUNNING_QOUTFIFO
	  Used to catch recursion through ahd_run_qoutfifo().

aic79xx.reg:
	Correct register addresses related to the software timer
	and the DFDBCTL register.

	Add constants paramaterizing the software timer.

	Add scratch ram locations for storing interrupt coalessing
	tunables.

	Break INTMASK in SEQITNCTL out into INTMASK1 and INTMASK2.
	In at least the REV A, these are writable bits.  We make
	use of that for a swtimer workaround in the sequencer.

	Since HS_MAILBOX autoclears, provide a sequencer variable
	to store its contents.

	Add SEQINT codes for handling task management completions.

aic79xx.seq:
	Correct ignore wide residue processing check for
	a wide negotiation being in effect.  We must be
	in the SCSI register window in order to access the
	negotiation table.

	Use the software timer and a commands completed count to
	implement interrupt coalessing.  The command complete is
	deferred until either the maximum command threshold or a
	the expiration of a command deferral timer.  If we have
	more SCBs to complete to the host (sitting in COMPLETE_SCB
	lists), always try to coaless them up to our coalessing limit.
	If coalessing is enabled, but we have fewer commands oustanting
	than the host's min coalessing limit, complete the command
	immediately.

	Add code to track the number of commands outstanding.
	Commands are outstanding from the time they are placed
	into the execution queue until the DMA to post completion
	is setup.

	Add a workaround for intvec_2 interrupts on the H2A4.
	In H2A4, the mode pointer is not saved for intvec2, but
	is restored on iret.  This can lead to the restoration
	of a bogus mode ptr.  Manually clear the intmask bits and
	do a normal return to compensate.  We use intvec_2 to
	track interrupt coalessing timeouts.

	Since we cannot disable the swtimer's countdown, simply
	mask its interrupt once we no longer care about it firing.

	In idle_loop_cchan, update LOCAL_HS_MAILBOX everytime
	we are notified of an HS_MAILBOX update via the
	HS_MAILBOX_ACT bit in QOFF_CTLSTA.  We have to use a
	local copy of persistant portions of the HS_MAILBOX as
	the mailbox auto-clears on any read.

	Move the test for the cfg4istat interrupt up an instruction
	to hopefully close a race between the next outgoing selection
	and our disabling of selections.

	Add a missing ret to the last instruction in load_overrun_buf.

	Add notifications to the host of task management
	completions as well as the completions for commands
	that completed successfully before their corresponding
	TMF could be sent.

	Hold a critical section during select-out processing
	until we have a fully identified connection.  This
	removes a race condition with the legacy abort handler.

	Correct a few spelling errors in some comments.

aic79xx_inline.h:
	Call ahd_reset_cmds_pending() in ahd_unpause if required.

	Update cmdcmplt interrupt statistics in our interrupt
	handler.

	Allow callers to ahd_send_scb() to set the task management
	function.

aic79xx_pci.c:
	Disable SERR and pause the controller prior to performing
	our mmapped I/O test.  The U320 controllers do not support
	"auto-access-pause".

aic79xx_osm.c:
	Set the task management function now that
	ahd_send_scb() doesn't do it for us.  We
	also perform a lun reset in response to BDR
	requests to packetized devices.
2003-01-20 20:17:35 +00:00
Scott Long
97cae63d7f Last minute fixes to ahc and ahd:
ahd_pci.c:
	Retrieve the allow_memio hint from the resource manager to
	determine whether or not to try PCI MEMIO.

aic79xx_osm.h:
aic7xxx_osm.h:
	Don't wrongly abuse the callout_reset() interface when trying
	to abuse timeouts generated from the CAM layer.  This fixes the
	console freeze and lost timeout problem that many have reported,
	especially on SMP systems.

aic79xx_pci.c
aic7xxx_pci.c
	Rewrite the MEMIO test routine to prevent certain broken chipsets
	from trying to burst multiple DWORDs to the registers.  Also make
	the routine better detect byte merging by the host bridge and
	deal with it.

aic79xx.reg:
	Correct an incorrect register definition.

Approved by:	re (rwatson, jhb)
2002-12-04 22:51:29 +00:00
Scott Long
0c5aa4c57b Major update to the ahd driver to fix many bugs found in the previous
version, plus add support for the new features found in the Rev B
version of the chip.  The changelog is quite long and can be provided
on request.  Major features include vastly improved protocol violation
handling, full support for the 7902 Rev B, better parity error
handling, and better packetized overrun handling, to name a few.

Approved by:	re (blanket)
2002-12-01 08:13:37 +00:00
Justin T. Gibbs
c59c8a72cf Upgrade to version 1.1 of the aic79xx U320 driver.
aic79xx.c:
	o Remove redundant ahd_update_modes() call.
	o Correct panic in diagnostic should state corruption cause
	  the SCB Id to be invalid during a selection timeout.
	o Add workaround for missing BUSFREEREV feature in Rev A silicon.
	o Corect formatting nits.
	o Use register pretty printing in more places.
	o Save and restore our SCB pointer when updating the waiting queue
	  list for an "expected" LQ-out busfree.
	o In ahd_clear_intstat, deal with the missing autoclear in the
	  CLRLQO* registers.
	o BE fixup in a diagnostic printf.
	o Make sure that we are in the proper mode before disabling
	  selections in ahd_update_pending_scbs.
	o Add more diagnostics.
	o task_attribute_nonpkt_tag -> task_attribute: we don't need a
	  nonpkt_tag field anymore for allowing all 512 SCBs to be
	  used in non-packetized connections.
	o Negotiate HOLD_MCS to U320 devices.
	o Add a few additional mode assertions.
	o Restore the chip mode after clearing out the qinfifo so that
	  code using ahd_abort_scbs sees a consistent mode.
	o Simplify the DMA engine shutdown routine prior to performing
	  a bus reset.
	o Perform the sequencer restart after a chip reset prior to
	  setting up our timer to poll for the reset to be complete.
	  On some OSes, the timer could actually pre-empt us and order
	  is important here.
	o Have our "reset poller" set the expected mode since there is
	  no guarantee of what mode will be in force when we are called
	  from the OS timer.
	o Save and restore the SCB pointer in ahd_dump_card_state().  This
	  routine must not modify card state.
	o Ditto for ahd_dump_scbs().

aic79xx.h:
	o Add a few more chip bug definitions.
	o Align our tag on a 32bit boundary.

aic79xx.reg:
aic79xx.seq:
	o Start work on removing workarounds for Rev B.
	o Use a special location in scratch from for stroring
	  our SCBPTR during legacy FIFO allocations.  This corrects
	  problems in mixed packetized/non-packetized configurations
	  where calling into a FIFO task corrupted our SCBPTR.
	o Don't rely on DMA priority to guarantee that all data in
	  our FIFOs will flush prior to a command completion notification
	  going out of the command channel.  We've never seen this assumption
	  fail, but better safe than sorry.
	o Deal with missing BUSFREEREV feature in H2A.
	o Simplify disconnect list code now that the list will always
	  have only a single entry.
	o Implement the AHD_REG_SLOW_SETTLE_BUG workaround.
	o Swith to using "REG_ISR" for local mode scratch during
	  our ISR.
	o Add a missing jmp to the data_group_dma_loop after our
	  data pointers have been re-initialized by the kernel.
	o Correct test in the bitbucket code so that we actually
	  wait for the bitbucket to complete before signaling the
	  kernel of the overrun condition.
	o Reposition pkt_saveptrs to avoid a jmp instruction.
	o Update a comment to reflect that the code now waits for
	  a FIFO to drain prior to issuing a CLRCHN.

aic79xx_inline.h:
	o Remove unused untagged queue handling code.
	o Don't attempt to htole64 what could be a 32bit value.

aic79xx_pci.c:
	o Set additional bug flags for rev A chips.
2002-09-26 22:54:00 +00:00
Justin T. Gibbs
3ebc100928 Convert to new assembler field syntax.
Add preliminary Rev B definitions.

Add QOUTFIFO_ENTRY_VALID_TAG for new qoufifo scheme.

Reserve SCB space for large luns.
2002-08-31 06:49:11 +00:00
Justin T. Gibbs
17d2475554 Enter the ahd driver which supports the Adaptec AIC7902 Ultra320, PCI-X
SCSI Controller chip.
2002-06-05 19:52:45 +00:00