There haven't been any non-obscure drivers that supported this
functionality and it has been impossible to test to ensure that it
still works. The only known consumer of this interface was the engine
in OpenSSL < 1.1. Modern OpenSSL versions do not include support for
this interface as it was not well-documented.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29736
Copy the iovec for the trailer from the proper place. This is the same
fix for CBC encryption from ff6a7e4ba6.
Reported by: gallatin
Reviewed by: gallatin, markj
Fixes: 49f6925ca
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29177
cryptosoft is always present and doesn't print any useful information
when it attaches.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29098
There currently isn't a need to provide a public interface to a
software Poly1305 implementation beyond what is already available via
libsodium's APIs and these symbols conflict with symbols shared within
the ossl.ko module between ossl_poly1305.c and ossl_chacha20.c.
Reported by: se, kp
Fixes: 78991a93eb
Sponsored by: Netflix
Maintain a cache of physically contiguous runs of pages for use as
output buffers when software encryption is configured and in-place
encryption is not possible. This makes allocation and free cheaper
since in the common case we avoid touching the vm_page structures for
the buffer, and fewer calls into UMA are needed. gallatin@ reports a
~10% absolute decrease in CPU usage with sendfile/KTLS on a Xeon after
this change.
It is possible that we will not be able to allocate these buffers if
physical memory is fragmented. To avoid frequently calling into the
physical memory allocator in this scenario, rate-limit allocation
attempts after a failure. In the failure case we fall back to the old
behaviour of allocating a page at a time.
N.B.: this scheme could be simplified, either by simply using malloc()
and looking up the PAs of the pages backing the buffer, or by falling
back to page by page allocation and creating a mapping in the cache
zone. This requires some way to save a mapping of an M_EXTPG page array
in the mbuf, though. m_data is not really appropriate. The second
approach may be possible by saving the mapping in the plinks union of
the first vm_page structure of the array, but this would force a vm_page
access when freeing an mbuf.
Reviewed by: gallatin, jhb
Tested by: gallatin
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28556
This supports Chacha20-Poly1305 for both send and receive for TLS 1.2
and for send in TLS 1.3.
Reviewed by: gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27841
This uses the chacha20 IETF and poly1305 implementations from
libsodium. A seperate auth_hash is created for the auth side whose
Setkey method derives the poly1305 key from the AEAD key and nonce as
described in RFC 8439.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27837
Note that this algorithm implements the mode defined in RFC 8439.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27836
When performing encryption in software, the KTLS crypto callback always
locks the session to deliver a wakeup. But, if we're handling the
operation synchronously this is wasted effort and can result in
sleepqueue lock contention on large systems.
Use CRYPTO_SESS_SYNC() to determine whether the operation will be
completed asynchronously or not, and select a callback appropriately.
Avoid locking the session to check for completion if the session handles
requests synchronously.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28195
Currently, OpenCrypto consumers can request asynchronous dispatch by
setting a flag in the cryptop. (Currently only IPSec may do this.) I
think this is a bit confusing: we (conditionally) set cryptop flags to
request async dispatch, and then crypto_dispatch() immediately examines
those flags to see if the consumer wants async dispatch. The flag names
are also confusing since they don't specify what "async" applies to:
dispatch or completion.
Add a new KPI, crypto_dispatch_async(), rather than encoding the
requested dispatch type in each cryptop. crypto_dispatch_async() falls
back to crypto_dispatch() if the session's driver provides asynchronous
dispatch. Get rid of CRYPTOP_ASYNC() and CRYPTOP_ASYNC_KEEPORDER().
Similarly, add crypto_dispatch_batch() to request processing of a tailq
of cryptops, rather than encoding the scheduling policy using cryptop
flags. Convert GELI, the only user of this interface (disabled by
default) to use the new interface.
Add CRYPTO_SESS_SYNC(), which can be used by consumers to determine
whether crypto requests will be dispatched synchronously. This is just
a helper macro. Use it instead of looking at cap flags directly.
Fix style in crypto_done(). Also get rid of CRYPTO_RETW_EMPTY() and
just check the relevant queues directly. This could result in some
unnecessary wakeups but I think it's very uncommon to be using more than
one queue per worker in a given workload, so checking all three queues
is a waste of cycles.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28194
This makes it a bit more straightforward to add new counters when
debugging. No functional change intended.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28498
Since r336439 we simply take the session pointer value mod the number of
worker threads (ncpu by default). On small systems this ends up
funneling all completion work through a single thread, which becomes a
bottleneck when processing IPSec traffic using hardware crypto drivers.
(Software drivers such as aesni(4) are unaffected since they invoke
completion handlers synchonously.)
Instead, maintain an incrementing counter with a unique value per
session, and use that to distribute work to completion threads.
Reviewed by: cem, jhb
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28159
Store the driver softc below the fields owned by opencrypto. This is
a bit simpler and saves a pointer dereference when fetching the driver
softc when processing a request.
Get rid of the crypto session UMA zone. Session allocations are
frequent or performance-critical enough to warrant a dedicated zone.
No functional change intended.
Reviewed by: cem, jhb
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28158
Crypto file descriptors were added in the original OCF import as a way
to provide per-open data (specifically the list of symmetric
sessions). However, this gives a bit of a confusing API where one has
to open /dev/crypto and then invoke an ioctl to obtain a second file
descriptor. This also does not match the API used with /dev/crypto on
other BSDs or with Linux's /dev/crypto driver.
Character devices have gained support for per-open data via cdevpriv
since OCF was imported, so use cdevpriv to simplify the userland API
by permitting ioctls directly on /dev/crypto descriptors.
To provide backwards compatibility, CRIOGET now opens another
/dev/crypto descriptor via kern_openat() rather than dup'ing the
existing file descriptor. This preserves prior semantics in case
CRIOGET is invoked multiple times on a single file descriptor.
Reviewed by: markj
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27302
- Rename cse*() to cse_*() to more closely match other local APIs in
this file.
- Merge the old csecreate() into cryptodev_create_session() and rename
the new function to cse_create().
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27070
This simplifies cryptof_ioctl as it now a wrapper around functions that
contain the bulk of the per-ioctl logic.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27068
This is consistent with cryptodevkey_cb being defined before it is used
and removes a prototype in the middle of the file.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27067
This breaks the case where the original pointer was NULL but an
in-line IV was used.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27064
This makes them friendlier to drivers that try to use const pointers
whenever possible in their internal structures.
Reviewed by: jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26901
- Check for null pointers in the crypto_drivers[] array when checking
for empty slots in crypto_select_kdriver().
- Handle the case where crypto_kdone() is invoked on a request where
krq_cap is NULL due to not finding a matching driver.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26811
Only one MIPS-specific driver implements support for one of the
asymmetric operations. There are no in-kernel users besides
/dev/crypto. The only known user of the /dev/crypto interface was the
engine in OpenSSL releases before 1.1.0. 1.1.0 includes a rewritten
engine that does not use the asymmetric operations due to lack of
documentation.
Reviewed by: cem, markj
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26810
This patch adds support for IPsec ESN (Extended Sequence Numbers) in
encrypt and authenticate mode (eg. AES-CBC and SHA256) and combined mode
(eg. AES-GCM).
For encrypt and authenticate mode the ESN is stored in separate crp_esn
buffer because the high-order 32 bits of the sequence number are
appended after the Next Header (RFC 4303).
For combined modes the high-order 32 bits of the sequence number [e.g.
RFC 4106, Chapter 5 AAD Construction] are part of crp_aad (prepared by
netipsec layer in case of ESN support enabled), therefore non visible
diff around combined modes.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D22364
Obtained from: Semihalf
Sponsored by: Stormshield
This permits requests (netipsec ESP and AH protocol) to provide the
IPsec ESN (Extended Sequence Numbers) in a separate buffer.
As with separate output buffer and separate AAD buffer not all drivers
support this feature. Consumer must request use of this feature via new
session flag.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D24838
Obtained from: Semihalf
Sponsored by: Stormshield
This is a simplistic approach which encrypts each TLS record in two
separate passes: one to generate the MAC and a second to encrypt.
This supports TLS 1.0 connections with implicit IVs as well as TLS
1.1+ with explicit IVs.
Reviewed by: gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26730
- Just use sw->octx != NULL to handle the HMAC case when finalizing
the MAC.
- Explicitly zero the on-stack auth context.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26688
It's included by header pollution in most of the compile
environments. However, in the standalone envirnment, it's not
included. Go ahead and include it always since the overhead is low and
it is simpler that way.
MFC After: 3 days
- Make session handling always use the CIOGSESSION2 structure.
CIOGSESSION requests use a thunk similar to COMPAT_FREEBSD32 session
requests. This permits the ioctl handler to use the 'crid' field
unconditionally.
- Move COMPAT_FREEBSD32 handling out of the main ioctl handler body
and instead do conversions in/out of thunk structures in dedicated
blocks at the start and end of the ioctl function.
Reviewed by: markj (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26178
crypto(9) functions can now be used on buffers composed of an array of
vm_page_t structures, such as those stored in an unmapped struct bio. It
requires the running to kernel to support the direct memory map, so not all
architectures can use it.
Reviewed by: markj, kib, jhb, mjg, mat, bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25671
Allow TLS records to be decrypted in the kernel after being received
by a NIC. At a high level this is somewhat similar to software KTLS
for the transmit path except in reverse. Protocols enqueue mbufs
containing encrypted TLS records (or portions of records) into the
tail of a socket buffer and the KTLS layer decrypts those records
before returning them to userland applications. However, there is an
important difference:
- In the transmit case, the socket buffer is always a single "record"
holding a chain of mbufs. Not-yet-encrypted mbufs are marked not
ready (M_NOTREADY) and released to protocols for transmit by marking
mbufs ready once their data is encrypted.
- In the receive case, incoming (encrypted) data appended to the
socket buffer is still a single stream of data from the protocol,
but decrypted TLS records are stored as separate records in the
socket buffer and read individually via recvmsg().
Initially I tried to make this work by marking incoming mbufs as
M_NOTREADY, but there didn't seemed to be a non-gross way to deal with
picking a portion of the mbuf chain and turning it into a new record
in the socket buffer after decrypting the TLS record it contained
(along with prepending a control message). Also, such mbufs would
also need to be "pinned" in some way while they are being decrypted
such that a concurrent sbcut() wouldn't free them out from under the
thread performing decryption.
As such, I settled on the following solution:
- Socket buffers now contain an additional chain of mbufs (sb_mtls,
sb_mtlstail, and sb_tlscc) containing encrypted mbufs appended by
the protocol layer. These mbufs are still marked M_NOTREADY, but
soreceive*() generally don't know about them (except that they will
block waiting for data to be decrypted for a blocking read).
- Each time a new mbuf is appended to this TLS mbuf chain, the socket
buffer peeks at the TLS record header at the head of the chain to
determine the encrypted record's length. If enough data is queued
for the TLS record, the socket is placed on a per-CPU TLS workqueue
(reusing the existing KTLS workqueues and worker threads).
- The worker thread loops over the TLS mbuf chain decrypting records
until it runs out of data. Each record is detached from the TLS
mbuf chain while it is being decrypted to keep the mbufs "pinned".
However, a new sb_dtlscc field tracks the character count of the
detached record and sbcut()/sbdrop() is updated to account for the
detached record. After the record is decrypted, the worker thread
first checks to see if sbcut() dropped the record. If so, it is
freed (can happen when a socket is closed with pending data).
Otherwise, the header and trailer are stripped from the original
mbufs, a control message is created holding the decrypted TLS
header, and the decrypted TLS record is appended to the "normal"
socket buffer chain.
(Side note: the SBCHECK() infrastucture was very useful as I was
able to add assertions there about the TLS chain that caught several
bugs during development.)
Tested by: rmacklem (various versions)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24628
This function manages the loop around crypto_dispatch and coordination
with ktls_ocf_callback.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25757
Allocate iovec arrays and struct cryptop and struct ocf_operation
objects on the stack to reduce avoid the overhead of malloc().
These structures are all small enough to fit on the stack of the KTLS
worker threads.
Reviewed by: gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25692
The function is called from a KLD load handler, so it may sleep.
- Stop checking for errors from uma_zcreate(), they don't happen.
- Convert M_NOWAIT allocations to M_WAITOK.
- Remove error handling for existing M_WAITOK allocations.
- Fix style.
Reviewed by: cem, delphij, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25696
These routines are similar to crypto_getreq() and crypto_freereq() but
operate on caller-supplied storage instead of allocating crypto
requests from a UMA zone.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25691
The global counters were not SMP-friendly. Use per-CPU counters
instead.
Reviewed by: jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25466
The counters are exported by a sysctl and have the same width on all
platforms anyway.
Reviewed by: cem, delphij, jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25465
It was added a very long time ago. It is single-threaded, so only
really useful for basic measurements, and in the meantime we've gotten
some more sophisticated profiling tools.
Reviewed by: cem, delphij, jhb
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25464
In addition to reducing lines of code, this also ensures that the full
allocation is always zeroed avoiding possible bugs with incorrect
lengths passed to explicit_bzero().
Suggested by: cem
Reviewed by: cem, delphij
Approved by: csprng (cem)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25435
