Commit Graph

60 Commits

Author SHA1 Message Date
Matthew Dillon
2f9e4e8025 Limit the amount of KVM reserved for the buffer cache and for swap-meta
information.  The default limits only effect machines with > 1GB of ram
and can be overriden with two new kernel conf variables VM_SWZONE_SIZE_MAX
and VM_BCACHE_SIZE_MAX, or with loader variables kern.maxswzone and
kern.maxbcache.  This has the effect of leaving more KVM available for
sizing NMBCLUSTERS and 'maxusers' and should avoid tripups where a sysad
adds memory to a machine and then sees the kernel panic on boot due to
running out of KVM.

Also change the default swap-meta auto-sizing calculation to allocate half
of what it was previously allocating.  The prior defaults were way too high.
Note that we cannot afford to run out of swap-meta structures so we still
stay somewhat conservative here.
2001-08-20 00:41:12 +00:00
Jeroen Ruigrok van der Werven
6b1d8ceabe Fix CMSG and ALIGN macro usage.
Previously we had to include <machine/param.h> or <sys/param.h> bogusly
due to the fact that <sys/socket.h> CMSG macros needed the ALIGN macro,
which was defined in param.h.  However, including param.h was a disaster
for namespace pollution.
This solution, as contributed by shin a while ago, fixes it elegantly
by wrapping the definitions around some namespace pollution preventer
definitions.
This patch was long overdue.
This should allow any network programmer to use <sys/socket.h> as
before.

PR:		19971, 20530
Submitted by:	Martin Kaeske <MartinKaeske@lausitz.net>
		Mark Andrews <Mark.Andrews@nominum.com>
Patch submitted by:	shin
Reviewed by:	bde
2000-11-08 16:59:25 +00:00
Paul Saab
c794ceb56a Implement write combining for crashdumps. This is useful when
write caching is disabled on both SCSI and IDE disks where large
memory dumps could take up to an hour to complete.

Taking an i386 scsi based system with 512MB of ram and timing (in
seconds) how long it took to complete a dump, the following results
were obtained:

Before:				After:
	WCE           TIME		WCE           TIME
	------------------		------------------
	1	141.820972		1	 15.600111
	0	797.265072		0	 65.480465

Obtained from:	Yahoo!
Reviewed by:	peter
2000-10-17 10:05:49 +00:00
Bosko Milekic
ec222a71d9 Cleanup comment in machine/param.h regarding mbuf-related sizes, and get rid
of MCLOFSET, which does not appear to be used anywhere anymore, and if it is,
it probably shouldn't be.
2000-10-08 03:52:27 +00:00
Paul Saab
92b123a002 Move MAXCPU from machine/smp.h to machine/param.h to fix breakage
with !SMP kernels.  Also, replace NCPUS with MAXCPU since they are
redundant.
2000-09-23 12:18:06 +00:00
Jonathan Lemon
863bdc0cff Change the mbuf size from 128 -> 256. Increasing the mbuf header size
caused some headers not to fit in MHLEN any more.  This matches the
current size on the alpha, so it shouldn't cause problems.

Problem observed by:	   Geoff Rehmet <geoff@is.co.za>
Originally suggested by:   shin
2000-03-29 05:39:04 +00:00
Peter Wemm
7ba4a77549 Reclaim UPAGES_HOLE (8k) that was chopped out of process address space.
The UPAGES have not been there since Jan '96, but the hole was preserved
for BSD/OS binary compatability.  This has been fixed other ways (%ebx
now has a pointer to PS_STRINGS), and the stack is nowhere near where
it used to be so this hack isn't required anymore.
1999-12-11 10:54:06 +00:00
Matthew Dillon
8b22cebb2c Back out a portion of the last commit. DFLTPHYS and MAXPHYS cannot
be set by a kernel conf option due to the struct buf structural
    dependancy (sizing of b_pages[]) creating a conflict with modules
    (which are not compiled with kernel config options overrides).

    We'll be able to sysctl these two later on when the buffer subsystem
    is revamped.
1999-09-22 05:48:31 +00:00
Matthew Dillon
a59d364a23 Change default block size for user VBLK device access from 2K to PAGE_SIZE
(4K on an i386, 8K on an alpha).

    Make BLKDEV_IOSIZE, DFLTPHYS, and MAXPHYS kernel-configurable.
1999-09-22 04:11:55 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Warner Losh
1684ea5706 Don't define MACHINE, MACHINE_ARCH, _MACHINE or _MACHINE_ARCH if
already defined.  This allows for cross building to work because we
need to lie to make to tell it to use the target names rather than the
host names.

This should have no effect on either architecture.  I've confirmed
that the intel build by make buildworld's for the past 3 months.
1999-03-01 06:10:16 +00:00
Luoqi Chen
1c6d46f93c Introduce machine-dependent macro pgtok() to convert page count to number
of kilobytes. Its definition for each architecture could be optimized to
avoid potential numerical overflows.
1999-02-19 19:34:49 +00:00
Peter Wemm
6c7178bdfb OBJFORMAT_DEFAULT = elf now. (this is where /usr/bin/objformat and
libc/gen/getobjformat.c get their default from)
1999-01-07 06:35:18 +00:00
David Greenman
6cde7a165f Fixed two potentially serious classes of bugs:
1) The vnode pager wasn't properly tracking the file size due to
   "size" being page rounded in some cases and not in others.
   This sometimes resulted in corrupted files. First noticed by
   Terry Lambert.
   Fixed by changing the "size" pager_alloc parameter to be a 64bit
   byte value (as opposed to a 32bit page index) and changing the
   pagers and their callers to deal with this properly.
2) Fixed a bogus type cast in round_page() and trunc_page() that
   caused some 64bit offsets and sizes to be scrambled. Removing
   the cast required adding casts at a few dozen callers.
   There may be problems with other bogus casts in close-by
   macros. A quick check seemed to indicate that those were okay,
   however.
1998-10-13 08:24:45 +00:00
John Polstra
cfa4d73988 Add a new library function getobjformat(). It checks all the
standard places ("/etc/objformat", ${OBJFORMAT}, argv) for an
indication of the user's preferred object file format.  This
consolidates some code that was starting to be duplicated in more
and more places.

Use the new function in ldconfig.

Note: I don't think that gcc should use getobjformat(), even though
it could.  The compiler should limit itself to functions that are
widespread, to ease porting and cross-compilation.
1998-09-09 01:21:25 +00:00
KATO Takenori
582e52862a - hw.machine_arch returns cpu architecture type.
- moved definition of MACHINE_ARCH from cpu.h to parm.h as alpha.
- Added definitions of _MACHINE and _MACHINE_ARCH.
- Added hw.ispc98. The hw.ispc98 is 1 in PC98 kernel and is 0 in
  IBM-PC kernel.

Discussed with:	John Birrell <jb@FreeBSD.ORG>
1998-08-31 08:41:58 +00:00
Bruce Evans
7cac38703b Oops, uoff_t can't be used here yet. 1998-06-15 04:50:55 +00:00
Bruce Evans
f0c2a198e7 Removed LOCORE ifdef. This header isn't used for locore stuff.
Use uoff_t instead of `unsigned long long' for unsigned offsets.

Fixed some style bugs.
1998-06-14 15:21:27 +00:00
John Dyson
50ce7ff499 Add better support for larger I/O clusters, including larger physical
I/O.  The support is not mature yet, and some of the underlying implementation
needs help.  However, support does exist for IDE devices now.
1998-01-24 02:01:46 +00:00
Steve Passe
78292efeef Another round of lock pushdown.
Add a simplelock to deal with disable_intr()/enable_intr() as used in UP kernel.
UP kernel expects that this is enough to guarantee exclusive access to
regions of code bracketed by these 2 functions.
Add a simplelock to bracket clock accesses in clock.c: clock_lock.

Help from:	Bruce Evans <bde@zeta.org.au>
1997-08-30 08:08:10 +00:00
KATO Takenori
662f9a6987 Move MACHINE_ARCH definition from <machine/param.h> to <machine/cpu.h>.
Submitted by:	Bruce Evans <bde@zeta.org.au>
1997-08-30 02:52:04 +00:00
KATO Takenori
d3e65fbc89 Fix typo in the comment introduced by me. 1997-08-29 11:01:14 +00:00
KATO Takenori
664f85174a Added a sysctl arg, hw.machine_arch. The hw.machine_arch is "ibm-pc"
on IBM-PC box and is "pc-98" on NEC PC-98 box.  Userland program can
distinguish architecture on which the program runs.
1997-08-29 09:03:40 +00:00
Steve Passe
886e789627 The last of the encapsolation of cpl/spl/ipending things into a critical
region protected by the simplelock 'cpl_lock'.

Notes:

 - this code is currently controlled on a section by section basis with
   defines in machine/param.h.  All sections are currently enabled.

 - this code is not as clean as I would like, but that can wait till later.

 - the "giant lock" still surrounds most instances of this "cpl region".
   I still have to do the code that arbitrates setting cpl between the
   top and bottom halves of the kernel.

 - the possibility of deadlock exists, I am committing the code at this
   point so as to exercise it and detect any such cases B4 the "giant lock"
   is removed.
1997-08-24 00:05:37 +00:00
Steve Passe
b3e4e390f6 Moved the COM_LOCK and COM_UNLOCK macros to machine/param.h. 1997-08-21 05:47:25 +00:00
Steve Passe
4a73d99f7e Made PEND_INTS default.
Made NEW_STRATEGY default.
Removed misc. old cruft.

Centralized simple locks into mp_machdep.c
Centralized simple lock macros into param.h

More cleanup in the direction of making splxx()/cpl MP-safe.
1997-08-21 05:08:25 +00:00
Steve Passe
75d23f5f87 Turn on the lockmanager by default for SMP.
Reviewed by:	"John S. Dyson" <toor@dyson.iquest.net>
1997-08-18 05:34:01 +00:00
John Dyson
48a09cf276 VM86 kernel support.
Work done by BSDI, Jonathan Lemon <jlemon@americantv.com>,
	Mike Smith <msmith@gsoft.com.au>, Sean Eric Fagan <sef@kithrup.com>,
	and probably alot of others.
Submitted by:	Jnathan Lemon <jlemon@americantv.com>
1997-08-09 00:04:06 +00:00
John Dyson
d3d1eb995b Fix the DDB breakpoint code when using the 4MB page support. 1997-08-07 05:15:52 +00:00
Steve Passe
28f53d312c pushed down "volatility" of simplelock to actual int inside the struct.
Submitted by:    bde@zeta.org.a
1997-08-04 19:14:56 +00:00
Steve Passe
e27fb7b666 param.h:
Macros to convert the Lite2 lock manager primitives to the names used
	in the kernel proper.  This allows us to hide them from the lock
	manager till they can be turned on.
smp.h:
	declarations for the new simplelock functions.
1997-07-24 23:48:53 +00:00
Steve Passe
d9593fb979 Forced 32bit alignment of struct simple_lock in param.h.
Added declarations of new simple_lock data and functions to smp.h.
1997-07-23 20:42:16 +00:00
Steve Passe
b1ba015c25 Added a missing semicolon, compile failed when I turned on simple_lock().
Evidently this has never been compiled before, NOT a good sign...
1997-07-22 23:19:48 +00:00
Peter Wemm
de871ab682 Define UPAGES_HOLE at 2 (same as current UPAGES) in case UPAGES changes
later.  This is used to calculate the top of user address space.
1997-04-07 09:27:21 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
John Dyson
996c772f58 This is the kernel Lite/2 commit. There are some requisite userland
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.

The system boots and can mount UFS filesystems.

Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
		Mount_std mounts will not work until the getfsent
		library routine is changed.

Reviewed by:	various people
Submitted by:	Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
bb2038d538 Improved the btodb() and dbtob() macros. I made them give unsigned
[long long] results when I last worked on them, but they are normally
used together with to daddr_t's and off_t's which are signed, so the
unsigned results did little except cause warnings.
1996-10-06 19:24:02 +00:00
Poul-Henning Kamp
aa8de40ae5 Another sweep over the pmap/vm macros, this time with more focus on
the usage.  I'm not satisfied with the naming, but now at least there is
less bogus stuff around.
1996-05-03 21:01:54 +00:00
Poul-Henning Kamp
5084d10dd0 Move atdevbase out of locore.s and into machdep.c
Macroize locore.s' page table setup even more, now it's almost readable.
Rename PG_U to PG_A (so that I can...)
Rename PG_u to PG_U.  "PG_u" was just too ugly...
Remove some unused vars in pmap.c
Remove PG_KR and PG_KW
Remove SSIZE
Remove SINCR
Remove BTOPKERNBASE

This concludes my spring cleaning, modulus any bug fixes for messes I
have made on the way.

(Funny to be back here in pmap.c, that's where my first significant
contribution to 386BSD was... :-)
1996-05-02 22:25:18 +00:00
Poul-Henning Kamp
e911eafcba removed:
CLBYTES PD_SHIFT PGSHIFT NBPG PGOFSET CLSIZELOG2 CLSIZE pdei()
        ptei() kvtopte() ptetov() ispt() ptetoav() &c &c
new:
        NPDEPG

Major macro cleanup.
1996-05-02 14:21:14 +00:00
David Greenman
b64b660cd3 Made "NMBCLUSTERS" calculation dynamic and fixed bogus use of "NMBCLUSTERS"
in machdep.c (it should use the global nmbclusters). Moved the calculation
of nmbclusters into conf/param.c (same place where nmbclusters has always
been assigned), and made the calculation include an extra amount based
on "maxusers". NMBCLUSTERS can still be overrided in the kernel config
file as always, but this change will make that generally unnecessary. This
fixes the "bug" reports from people who have misconfigured kernels seeing
the network hang when the mbuf cluster pool runs out.

Reviewed by:	John Dyson
1995-05-25 07:41:28 +00:00
Gary Palmer
43decb5384 Bruces fixes for large filesystems
Submitted by:	Bruce Evans <bde@zeta.org.au>
1995-02-19 10:36:17 +00:00
David Greenman
fb1322e408 Decrease MCLBYTES from 4k back to 2k. It isn't likely that we'll be doing
page flipping anytime soon and 4k just wastes memory. Performance via the
looback interface will decrease slightly by this change. Idealy, we need
buffers that can have variable sizes, but this requires a rewrite of far
too much code at the moment.
1995-01-23 19:21:49 +00:00
Bruce Evans
6052572ac4 Replace unsigned' by u_int' so that it is not necessary to include
<sys/types.h> before including this header.  This header is now
idempotent.

Uniformize idempotency #ifdef.
1994-09-18 22:05:22 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
David Greenman
04f1835605 1) "Pre-faulting" in of pages into process address space
Eliminates vm_fault overhead on process startup and
		mmap referenced data for in-memory pages.

		(process startup time using in-memory segments *much* faster)

	2)	Even more efficient pmap code.  Code partially cleaned up.
		More comments yet to follow.

		(generally more efficient pte management)

	3)	Pageout clustering ( in addition to the FreeBSD V1.1 pagein
		clustering.)

		(much faster paging performance on non-write behind disk
		subsystems, slightly faster performance on other systems.)

	4)	Slightly changed vm_pageout code for more efficiency and
		better statistics.  Also, resist swapout a little more.

		(less likely to pageout a recently used page)

	5)	Slight improvement to the page table page trap efficiency.

		(generally faster system VM fault performance)

	6)	Defer creation of unnamed anonymous regions pager until needed.

		(speeds up shared memory bss creation)

	7)	Remove possible deadlock from swap_pager initialization.

	8)	Enhanced procfs to provide "vminfo" about vm objects and user
		pmaps.

	9)	Increased MCLSHIFT/MCLBYTES from 2K to 4K to improve net &
		socket performance and to prepare for things to come.

John Dyson
dyson@implode.root.com
David Greenman
davidg@root.com
1994-03-07 11:38:49 +00:00
David Greenman
ec120393a0 VM system performance improvements from John Dyson and myself. The
following is a summary:

1) increased object cache back up to a more reasonable value.
2) removed old & bogus cruft from machdep.c (clearseg, copyseg,
	physcopyseg, etc).
3) inlined many functions in pmap.c
4) changed "load_cr3(rcr3())" into tlbflush() and made tlbflush inline
	assembly.
5) changed the way that modified pages are tracked - now vm_page struct
	is kept updated directly - no more scanning page tables.
6) removed lots of unnecessary spl's
7) removed old unused functions from pmap.c
8) removed all use of page_size, page_shift, page_mask variables - replaced
	with PAGE_ constants.
9) moved trunc/round_page, atop, ptoa, out of vm_param.h and into i386/
	include/param.h, and optimized them.
10) numerous changes to sys/vm/ swap_pager, vnode_pager, pageout, fault
	code to improve performance. LRU algorithm modified to be more
	effective, read ahead/behind values tuned for better performance,
	etc, etc...
1994-01-31 04:19:00 +00:00
David Greenman
7f8cb36869 "New" VM system from John Dyson & myself. For a run-down of the
major changes, see the log of any effected file in the sys/vm
directory (swap_pager.c for instance).
1994-01-14 16:25:31 +00:00
Garrett Wollman
aaf08d94ca Make everything compile with -Wtraditional. Make it easier to distribute
a binary link-kit.  Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.

NB: -Wtraditional will henceforth be forgotten.  This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax.  These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00