The key problem was that the aperture size detection using the MSAC bit
doesn't work -- the bit appears to be set even when it shouldn't be. Linux
takes a different approach, testing for a bit of the GMADR (PCIR_BAR(2)) being
set. However, as I don't think that's a safe way to test aperture size, we
just allocate the resource and check its size. This also pointed out that
agp_generic_attach hadn't been allocating our aperture resource, which may
have caused problems in some cases.
Also corrected is a minor copy-and-pasteo in an error case.
PR: kern/103079
Submitted by: mnag
Tested on: i945GM, i915GM
MFC after: 2 weeks
With the first part of my previous Summer of Code work, we get:
-made libalias modular:
-support for 'particular' protocols (like ftp/irc/etcetc) is no more
hardcoded inside libalias, but it's available through external
modules loadable at runtime
-modules are available both in kernel (/boot/kernel/alias_*.ko) and
user land (/lib/libalias_*)
-protocols/applications modularized are: cuseeme, ftp, irc, nbt, pptp,
skinny and smedia
-added logging support for kernel side
-cleanup
After a buildworld, do a 'mergemaster -i' to install the file libalias.conf
in /etc or manually copy it.
During startup (and after every HUP signal) user land applications running
the new libalias will try to read a file in /etc called libalias.conf:
that file contains the list of modules to load.
User land applications affected by this commit are ppp and natd:
if libalias.conf is present in /etc you won't notice any difference.
The only kernel land bit affected by this commit is ng_nat:
if you are using ng_nat, and it doesn't correctly handle
ftp/irc/etcetc sessions anymore, remember to kldload
the correspondent module (i.e. kldload alias_ftp).
General information and details about the inner working are available
in the libalias man page under the section 'MODULAR ARCHITECTURE
(AND ipfw(4) SUPPORT)'.
NOTA BENE: this commit affects _ONLY_ libalias, ipfw in-kernel nat
support will be part of the next libalias-related commit.
Approved by: glebius
Reviewed by: glebius, ru
just use the COULD_BOUNCE flag for both and retire the USE_FILTER flag.
This fixes the problem that rev 1.81 introduced with the if_bfe driver
(and possibly others).
Who would have thought that getting a kernel printf right would be so
tricky?
MFC after: 3 days
Submitted by: Gavin Atkinson <gavin dot atkinson at ury dot york dot ac dot uk>
closing a window where a file system using softupdates could be async
for a short while if both MNT_UPDATE and MNT_ASYNC were passed as flags
to nmount(). Add MNTK_SOFTDEP flag to ensure that softdep_mount()
doesn't increase mnt_noasync multiple times.
sync() and sync_fsync() without losing MNT_ASYNC. Add MNTK_ASYNC flag
which is set only when MNT_ASYNC is set and mnt_noasync is zero, and
check that flag instead of MNT_ASYNC before initiating async io.
the VRRPv2 advertisements will originate from the wrong source address.
This only affects kernels compiled with MROUTING and after the MRT_INIT
ioctl() has been issued.
Set imo_multicast_vif in carp's softc to the invalid value -1 after it is
zeroed by softc allocation, to stop the ip_output() path looking up the
incorrect source address thinking a vif is set.
PR: kern/100532
Submitted by: Bohus Plucinsky
MFC after: 1 week
written to the audit trail file:
- audit_record_write() now returns void, and all file system specific
error handling occurs inside this function. This pushes error handling
complexity out of the record demux routine that hands off to both the
trail and audit pipes, and makes trail behavior more consistent with
pipes as a record destination.
- Rate limit kernel printfs associated with running low on space. Rate
limit audit triggers for low space. Rate limit printfs for fail stop
events. Rate limit audit worker write error printfs.
- Document in detail the types of limits and space checks we perform, and
combine common cases.
This improves the audit subsystems tolerance to low space conditions by
avoiding toasting the console with printfs are waking up the audit daemon
continuously.
MFC after: 3 days
Obtained from: TrustedBSD Project
programs to find out exactly which events were registered and which were
returned... This should be lower in kern_kevent, but that would require
special munging due to locks and the functions used to copyin/copyout
kevents...
If someone wants to teach ktrace how to output pretty kevents, I have a
kevent prety printer that can be used...
The goal was to sync with the OSSv4 API 4Front Technologies uses in their
proprietary OSS driver. This was successful as far as possible. The part
of the API which is stable is implemented, for the rest there are some
stubs already.
New system ioctls:
- SNDCTL_SYSINFO - obtain audio system info (version, # of audio/midi/
mixer devices, etc.)
- SNDCTL_AUDIOINFO - fetch details about a specific audio device
- SNDCTL_MIXERINFO - fetch details about a specific mixer device
New audio ioctls:
- Sync groups (SNDCTL_DSP_SYNCGROUP/SNDCTL_DSP_SYNCSTART) which allow
triggered playback/recording on multiple devices (even across processes
simultaneously).
- Peak meters (SNDCTL_DSP_GETIPEAKS/SNDCTL_DSP_GETOPEAKS) - can query
audio drivers for peak levels (needs driver support, disabled for now).
- Per channel playback/recording levels -
SNDCTL_DSP_{GET,SET}{PLAY,REC}VOL. Note that these are still in name
only, just wrapping around the AC97-style mixer at the moment. The next
step is to push them down to the drivers.
Audio ioctls still under development by 4Front (for which stubs may exist
in this commit):
- SNDCTL_GETNAME, SNDCTL_{GET,SET}{SONG,LABEL}
- SNDCTL_DSP_{GET,SET}_CHNORDER
- SNDCTL_MIX_ENUMINFO, SNDCTL_MIX_EXTINFO - (might be documented enough in
the OSS releases to work on this. These ioctls cover the cool "twiddle
any knob on your card" features.)
Missing:
- SNDCTL_DSP_COOKEDMODE -- this ioctl is used to give applications direct
access to a card's buffers, bypassing the feeder architecture. It's
a toughy -- "someone" needs to decide :
(a) if this is desireable, and (b) if it's reasonably feasible.
Updates for driver writers:
So far, only two routines to the channel class (in channel_if.m) are added.
One is for fetching a list of discrete supported playback/recording rates
of a channel, and the other is for fetching peak level info (useful for
drawing peak meters). Interested parties may want to help pushing down
SNDCTL_DSP_{GET,SET}{PLAY,REC}VOL into the drivers.
To use the new stuff you need to rebuild the sound drivers or your kernel
(depending on if you use modules or not) and to install soundcard.h (a
buildworld/installworld handles this).
Sponsored by: Google SoC 2006
Submitted by: ryanb
Many thanks to: 4Front Technologies for their cooperation, explanations
and the nice license of their soundcard.h.
- Linux returns ENOPROTOOPT in a case of not supported opt to setsockopt.
- Return EISDIR in pread() when arg is a directory.
- Return EINVAL instead of EFAULT when namelen is not correct in accept().
- Return EINVAL instead of EACCESS if invalid access mode is entered in
access().
- Return EINVAL instead of EADDRNOTAVAIL in a case of bad salen param
to bind().
Submitted by: rdivacky
Tested with: LTP (vfork01 fails now, but it seems to be a race and
not caused by those changes)
MFC after: 1 week
the header field for possible later IPSEC SPD lookup, even
when the kernel is built without 'options INET6'.
PR: kern/57760
MFC after: 1 week
Submitted by: Joachim Schueth
you can't call tty_clone afterwords. OpenBSD and NetBSD both fail the
open call in that case, so we should do so as well. This can
be done in ctty_clone by returning with *dev==NULL. Admittedly this
causes open to return ENOENT, instead of ENXIO as on the other BSDs,
but this way requires the least touching of code.
Submitted by: Nate Eldredge <nge@cs.hmc.edu>
PR: 83375
MFC: 1 week
GDT to be loaded into FS.base and GS.base, these values of course
are not the values set by sysarch() with I386_SET_FSBASE and
I386_SET_GSBASE, the change fixed a crash for 32bit libthr after
signal handler returned and normal code is accessing thread pointer,
for example: movl %gs:8, %eax.
- Split out the communication protocols into their own files and use
a couple of function pointers in the softc that the commuication
protocols setup in their own attach routine.
- Add support for the SSIF interface (talking to IPMI over SMBus).
- Add an ACPI attachment.
- Add a PCI attachment that attaches to devices with the IPMI interface
subclass.
- Split the ISA attachment out into its own file: ipmi_isa.c.
- Change the code to probe the SMBIOS table for an IPMI entry to just use
pmap_mapbios() to map the table in rather than trying to setup a fake
resource on an isa device and then activating the resource to map in the
table.
- Make bus attachments leaner by adding attach functions for each
communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.)
that setup per-interface data.
- Formalize the model used by the driver to handle requests by adding an
explicit struct ipmi_request object that holds the state of a given
request and reply for the entire lifetime of the request. By bundling
the request into an object, it is easier to add retry logic to the various
communication backends (as well as eventually support BT mode which uses
a slightly different message format than KCS, SMIC, and SSIF).
- Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE.
- Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool
on FreeBSD/amd64.
- Add ipmi(4) to i386 and amd64 NOTES.
Submitted by: ambrisko (large portions of 2 and 3)
Sponsored by: IronPort Systems, Yahoo!
MFC after: 6 days
packets. Reimplement this correctly and use a sysctl that defaults to off so
the user doesnt get any suprises if ipfw blocks the ARP packet.
MFC after: 3 days
the entire record when a non-data mbuf is removed in the soreceive() path.
This only triggers a panic directly when compiled with INVARIANTS.
PR: 38495
Submitted by: James Juran
MFC after: 1 week
pmap_protect(), and pmap_copy() have optimizations for regions
larger than PMAP_TSB_THRESH (which works out to 16MB). This
caused a panic in tsb_foreach for kernel mappings, since
pm->pm_tsb is NULL in that case. This fix teaches tsb_foreach
to use the kernel's tsb in that case.
Submitted by: Michael Plass
MFC after: 3 days
Unfortunately, the QUEUE FULL event only tells you Bus && Target.
It doesn't tell you lun. In order for the XPT_REL_SIMQ action to
work, we have to have a real lun. But which one? For now, just
iterate over MPT_MAX_LUNS.
Practically speaking, this is only going to be happening for lower
quality SAS or SATA drives behind the SAS controller, which means
only lun 0, so it's not so bad.
Helpful Reminder Nagging from: John Baldwin, Fred Whiteside
MFC after: 5 days
of directory reading system calls.
Respell a mis-spelled event name.
Clean up white space/line wraps in a couple of places.
Assign event numbers to some new system call entries that have turned
up in the list since audit support was added.
Obtained from: TrustedBSD Project
returns the previous value that the "add" effected (In
this case we are adding -1), afterwhich we compare it
to '0'... to see if we free the mbuf... we should
be comparing it to '1'... Note that this only effects
when there is contention since there is a first part
to the comparison that checks to see if its '1'. So
this bug would only crop up if two CPU's are trying
to free the same mbuf refcount at the same time. This
will happen in SCTP but I doubt can happen in TCP or
UDP.
PR: N/A
Submitted by: rrs
Reviewed by: gnn,sam
Approved by: gnn,sam
of the chip to let ASF/IPMI firmware to respond to IPMI after attaching
and when the chip is down. David looked at it but could really say
what they right minimal config. stuff would be. It's not documented.
I figured this out via trial and error.
Reviewed by: davidch
behaves. This fixes a lot of test which failed before. For amd64 there
are still some problems, but without any testers which apply patches
and run some predefines tests we can't do more ATM.
Submitted by: Marcin Cieslak <saper@SYSTEM.PL> (minor fixups by myself)
Tested with: LTP
appears to be serving a useful purpose, as it was used during initial
development of MAC support for System V IPC.
MFC after: 1 month
Obtained from: TrustedBSD Project
Suggested by: Christopher dot Vance at SPARTA dot com
other problems while labels were first being added to various kernel
objects. They have outlived their usefulness.
MFC after: 1 month
Suggested by: Christopher dot Vance at SPARTA dot com
Obtained from: TrustedBSD Project
when allocating the record in the first place, allocate the final buffer
when closing the BSM record. At that point, more size information is
available, so a sufficiently large buffer can be allocated.
This allows the kernel to generate audit records in excess of
MAXAUDITDATA bytes, but is consistent with Solaris's behavior. This only
comes up when auditing command line arguments, in which case we presume
the administrator really does want the data as they have specified the
policy flag to gather them.
Obtained from: TrustedBSD Project
MFC after: 3 days
is incorrect, and causes endianness bugs on 64-bit big-endian
machines (sparc64), it's the best choice for now, as many of
these IOCTLs are used inside the kernel, and bogusly pass an
argument as "int *" which results in unaligned access panics
on sparc64 when attempting to dereference them via *(intptr_t *).
(Several of us are working on a real fix, which is uneasy.)
switch by worklist type contains two for() loops, for D_INDIRDEP and
D_PAGEDEP. On error, these loops are exited by break, where the switch
actually shall be leaved. Use goto instead of break to reach the error
handling code.
Reported by: Peter Holm
Reviewed by: tegge
Approved by: pjd (mentor)
MFC after: 2 weeks
code is still under giant lock, but the session/pgrp release code just used
proctree_locks. This explains why moving the proctree_lock in sys/kern/tty.c
rev. 1.258 did fix the panics in our SMP systems.
This should also fix some race panics with revoked ttys.
Reviewed by: jhb
MFC after: 1 week
and drop_dm_lock is true, no unlocking shall be attempted. The lock is
already dropped and memory is freed.
Found with: Coverity Prevent(tm)
CID: 1536
Approved by: pjd (mentor)
part of the hal distribution early on when the hal was built for
each os but it's been portable for a long time so move the os-specific
code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h
MFC after: 2 weeks
be recycled during the sleep, wrap the vn_lock with vhold/vdrop.
Check that coveredvp still points to the same mp after sleep (needed
because sleep dropped Giant).
Move check for user rights for unmount after coveredvp lock is obtained.
Tested by: Peter Holm
Reviewed by: tegge
Approved by: kan (mentor)
MFC after: 2 weeks
vnode lock in devfs_allocv. Do this by temporary dropping dm_lock around
vnode locking.
For safe operation, add hold counters for both devfs_mount and devfs_dirent,
and DE_DOOMED flag for devfs_dirent. The facilities allow to continue after
dropping of the dm_lock, by making sure that referenced memory does not
disappear.
Reviewed by: tegge
Tested by: kris
Approved by: kan (mentor)
PR: kern/102335
with other commonly used sysctl name spaces, rather than declaring them
all over the place.
MFC after: 1 month
Sponsored by: nCircle Network Security, Inc.
audit pipes. If the kernel record was not selected for the trail or the pipe,
any user supplied record attached to it would be tossed away, resulting in
otherwise selected events being lost.
- Introduce two new masks: AR_PRESELECT_USER_TRAIL AR_PRESELECT_USER_PIPE,
currently we have AR_PRESELECT_TRAIL and AR_PRESELECT_PIPE, which tells
the audit worker that we are interested in the kernel record, with
the additional masks we can determine if either the pipe or trail is
interested in seeing the kernel or user record.
- In audit(2), we unconditionally set the AR_PRESELECT_USER_TRAIL and
AR_PRESELECT_USER_PIPE masks under the assumption that userspace has
done the preselection [1].
Currently, there is work being done that allows the kernel to parse and
preselect user supplied records, so in the future preselection could occur
in either layer. But there is still a few details to work out here.
[1] At some point we need to teach au_preselect(3) about the interests of
all the individual audit pipes.
This is a RELENG_6 candidate.
Reviewed by: rwatson
Obtained from: TrustedBSD Project
MFC after: 1 week
m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.
Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:
m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */
m->m_flags |= M_VLANTAG;
to mark the packet m with the specified VLAN tag.
On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:
if (m->m_flags & M_VLANTAG) {
... = m->m_pkthdr.ether_vtag; /* htons()? */
... pass tag to hardware ...
}
VLAN tags are stored in host byte order. Byte swapping may be necessary.
(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)
Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag
memory allocation have to be done.
Reviewed by: thompsa, yar
Sponsored by: TCP/IP Optimization Fundraise 2005
unconfigured state of the kernel accounting system. This is used by
the accounting privilege regression test to determine whether
accounting is in use and will be disrupted by the regression test.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
MFC after: 1 month
- add support to power off the system [2]
- check the linux magic values [3]
Submitted by: Marcin Cieslak <saper@SYSTEM.PL> [1,2]
Modelled after: linux man page of the reboot() syscall [3]
Found by: LTP testcase "reboot02" [1]
Tested with: LTP testcase "reboot02" [1,3]
MFC after: 1 week
Use something like this:
route add -inet6 <dest_addr> <my_addr_on_that_interface> -interface -llinfo
This is usefull for wireless adhoc mesh networks.
MFC after: 5 days
of individual interfaces should match the ipackets/ibytes counter of
the aggregate (FEC) interface.
PR: kern/82189
Submitted by: Stikheev Andrew <sand AT zunet DOT ru>
MFC after: 3 days
- Added support for multicast filtering, now that the firmware
supports it. Note that this is not yet tested, as multicast
seems to panic -current (even w/o mxge loaded)
- Added workaround to cope with different irq data struct size on
pre-multicast firmware which can found running on nics.
- Added Intel E5000 PCIe chipsets to list providing aligned completions.
- Replaced various magic constants with #defines, now that they are
defined in the firmware headers.