Commit Graph

73 Commits

Author SHA1 Message Date
Hans Petter Selasky
f0188618f2 Fix multiple incorrect SYSCTL arguments in the kernel:
- Wrong integer type was specified.

- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.

- Logical OR where binary OR was expected.

- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.

- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.

- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.

- Updated "EXAMPLES" section in SYSCTL manual page.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2014-10-21 07:31:21 +00:00
Steven Hartland
e248a3d1f6 Bring in LSI's phase19 changes
* Removed unused mpssas_discovery_timeout function.
* Don't alter mapping boundaries if not raid firmware.
* Check free_busaddr instead of post_busaddr (diff minimisation really)

MFC after:	2 weeks
2014-07-30 18:21:06 +00:00
Steven Hartland
7571e7f64a Bring in LSI's phase16 - phase18 changes
* Implements Start Stop Unit for SATA direct-attach devices in IR mode to avoid
  data corruption.
* Use CAM_DEV_NOT_THERE instead of CAM_SEL_TIMEOUT and CAM_TID_INVALID

Obtained from:	LSI
MFC after:	2 weeks
2014-07-30 17:58:17 +00:00
Scott Long
9b6ea4e794 Don't overload the CCB status field within the driver.
Obtained from:	Netflix, Inc.
MFC after:	2 days
2014-07-01 10:51:20 +00:00
Scott Long
601781ccc3 Add accessor functions for manipulating the CAM CCB status field.
Reviewed by:	gibbs
Obtained from:	Netflix, Inc
MFC after:	2 days
2014-07-01 04:44:18 +00:00
Scott Long
b7f7712702 Refactor some code in mps.c to reduce header pollution.
Reviewed by:	gibbs
Obtained from:	Netflix, Inc.
MFC after:	2 days
2014-07-01 04:33:36 +00:00
Alexander Motin
c2a0f07a10 Increase taskqueue thread priority from idle to PRIBIO.
Idle priority is not even time-share, so if system is busy in any way,
those events may never be executed.  Since in some cases system waits
for events processed by that thread, that may cause deadlocks.
2014-05-24 13:00:49 +00:00
Kenneth D. Merry
d2b4e18b21 Fix TLR (Transport Layer Retry) support in the mps(4) and mpr(4) drivers.
TLR is necessary for reliable communication with SAS tape drives.

This was broken by change 246713 in the mps(4) driver.  It changed the
cm_data field for SCSI I/O requests to point to the CCB instead of the data
buffer.  So, instead, look at the CCB's data pointer to determine whether
or not we're talking to a tape drive.

Also, take the residual into account to make sure that we don't go off the
end of the request.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2014-05-08 20:28:22 +00:00
Scott Long
0823577306 Add some assertions to ensure that the target array doesn't get accessed
out of bounds.

Obtained from:	Netflix, Inc.
MFC after:	3 days
2014-04-07 15:13:24 +00:00
Alexander Motin
37b8d8c41c Restore SIM freeze/release match, broken at r253549.
This fixes problem with SIM left in frozen state after reinit, for example,
after firmware update.

MFC after:	1 week
2014-02-27 21:48:34 +00:00
Alexander Motin
ec3dd42625 Pass proper pointer to bus_dmamem_free() in mps_iocfacts_free().
Passing there pointer into the middle of allocated area caused kernel
panic during reinit, for example, after firmware upgrade.

MFC after:	1 week
2014-02-27 11:34:26 +00:00
Nathan Whitehorn
123055f01f Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.

MFC after: 2 weeks
2013-10-30 14:04:47 +00:00
Kenneth D. Merry
cd04f04fb5 Fix an issue that caused Integrated RAID volumes on LSI mps(4) controllers
to not get scanned on boot.

The problem originated in change 253549.  With the change to the mps(4)
driver to scan only targets that it knows it has (as opposed to scanning
the entire bus), scanning RAID volumes on boot was omitted.

So, for versions of FreeBSD that have the scanning changes
(__FreeBSD_version 1000039 and higher), scan RAID volumes that are added
whether or not we're booting.

PR:		kern/181784
Reported by:	Xiguang Wang <kurapica@gmail.com>
Tested by:	Dennis Glatting <dg@pki2.com>
Sponsored by:	Spectra Logic
Approved by:	re (delphij)
MFC After:	3 days
2013-09-12 22:06:12 +00:00
Kenneth D. Merry
ec99409e7e Fix mps(4) driver breakage that came in in change 253550 that
manifested itself in out of chain frame conditions.

When the driver ran out of chain frames, the request in question
would get completed early, and go through mpssas_scsiio_complete().

In mpssas_scsiio_complete(), the negation of the CAM status values
(CAM_STATUS_MASK | CAM_SIM_QUEUED) was ORed in instead of being
ANDed in.  This resulted in a bogus CAM CCB status value.  This
didn't show up in the non-error case, because the status was reset
to something valid (e.g. CAM_REQ_CMP) later on in the function.

But in the error case, such as when the driver ran out of chain
frames, the CAM_REQUEUE_REQ status was ORed in to the bogus status
value.  This led to the CAM transport layer repeatedly releasing
the SIM queue, because it though that the CAM_RELEASE_SIMQ flag had
been set.  The symptom was messages like this on the console when
INVARIANTS were enabled:

xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0

mps_sas.c:	In mpssas_scsiio_complete(), use &= to take status
		bits out.  |= adds them in.

		In the error case in mpssas_scsiio_complete(), set
		the status to CAM_REQUEUE_REQ, don't OR it in.

MFC after:	3 days
Sponsored by:	Spectra Logic
2013-08-21 21:30:56 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Alexander Motin
fe97b88c15 Add brace missing in r254253. 2013-08-12 20:17:37 +00:00
Scott Long
32373512c3 r253460 accidentally some moderately expensive debugging code, even
when debugging isn't enabled.  Work around this.

Submitted by:	mav
Obtained from:	Netflix
MFC after:	3 days
2013-08-12 19:16:55 +00:00
Scott Long
fe8391035a Rate limit the 'out of chain frame' messages to once per 60 seconds.
Obtained from:	Netflix
MFC after:	3 days
2013-08-09 01:10:33 +00:00
Scott Long
d9802deb4e Sometimes a device misbehaves so badly that it disrupts the entire system.
Add a tunable that allows such a device to be excluded from the driver.
The id parameter is the target id that the driver assigns to a given device.

dev.mps.X.exclude_ids=<id>,<id>

Obtained from:	Netflix
MFC after:	3 days
2013-08-09 01:09:02 +00:00
Scott Long
7263f45e6f Fix a printf typo.
Obtained from:	LSI
2013-07-30 17:35:06 +00:00
Kenneth D. Merry
9b91b192fb Merge in phase 14+ -> 16 mps driver fixes from LSI:
---------------------------------------------------------------
System panics during a Port reset with ouststanding I/O
---------------------------------------------------------------
It is possible to call mps_mapping_free_memory after this
memory is already freed, causing a panic. Removed this extra
call to mps_mappiing_free_memory and call mps_mapping_exit
in place of the mps_mapping_free_memory call so that any
outstanding mapping items can be flushed before memory is
freed.

---------------------------------------------------------------
Correct memory leak during a Port reset with ouststanding I/O
---------------------------------------------------------------
In mps_reinit function, the mapping memory was not being
freed before being re-allocated. Added line to call the
memory free function for mapping memory.

---------------------------------------------------------------
Use CAM_SIM_QUEUED flag in Driver IO path.
---------------------------------------------------------------
This flag informs the XPT that successful abort of a CCB
requires an abort ccb to be issued to the SIM.  While
processing SCSI IO's, set the CAM_SIM_QUEUED flag in the
status for the IO. When the command completes, clear this
flag.

---------------------------------------------------------------
Check for CAM_REQ_INPROG in I/O path.
---------------------------------------------------------------
Added a check in mpssas_action_scsiio for the In Progress
status for the IO. If this flag is set, the IO has already
been aborted by the upper layer (before CAM_SIM_QUEUED was
set) and there is no need to send the IO. The request will
be completed without error.

---------------------------------------------------------------
Improve "doorbell handshake method" for mps_get_iocfacts
---------------------------------------------------------------
Removed call to get Port Facts since this information is
not used currently.

Added mps_iocfacts_allocate function to allocate memory
that is based on IOC Facts data.  Added mps_iocfacts_free
function to free memory that is based on IOC Facts data.
Both of the functions are used when a Diag Reset is performed
or when the driver is attached/detached. This is needed in
case IOC Facts changes after a Diag Reset, which could
happen if FW is upgraded.

Moved call of mps_bases_static_config_pages from the attach
routine to after the IOC is ready to process accesses based
on the new memory allocations (instead of polling through
the Doorbell).

---------------------------------------------------------------
Set TimeStamp in INIT message in millisecond format Set the IOC
---------------------------------------------------------------

---------------------------------------------------------------
Prefer mps_wait_command to mps_request_polled
---------------------------------------------------------------
Instead of using mps_request_polled, call mps_wait_command
whenever possible. Change the mps_wait_command function to
check the current context and either use interrupt context
or poll if required by using the pause or DELAY function.
Added a check after waiting 50mSecs to see if the command
has timed out. This is only done if polliing, the msleep
command will automatically timeout if the command has taken
too long to complete.

---------------------------------------------------------------
Integrated RAID: Volume Activation Failed error message is
displayed though the volume has been activated.
---------------------------------------------------------------
Instead of failing an IOCTL request that does not have a
large enough buffer to hold the complete reply, copy as
much data from the reply as possible into the user's buffer
and log a message saying that the user's buffer was smaller
than the returned data.

---------------------------------------------------------------
mapping_add_new_device failure due to persistent table FULL
---------------------------------------------------------------
When a new device is added, if it is determined that the
device persistent table is being used and is full, instead
of displaying a message for this condition every time, only
log a message if the MPS_INFO bit is set in the debug_flags.

Submitted by:	LSI
MFC after:	1 week
2013-07-22 18:41:53 +00:00
Kenneth D. Merry
b01773b0f1 CAM and mps(4) driver scanning changes.
Add a PIM_NOSCAN flag to the CAM path inquiry CCB.  This tells CAM
not to perform a rescan on a bus when it is registered.

We now use this flag in the mps(4) driver.  Since it knows what
devices it has attached, it is more efficient for it to just issue
a target rescan on the targets that are attached.

Also, remove the private rescan thread from the mps(4) driver in
favor of the rescan thread already built into CAM.  Without this
change, but with the change above, the MPS scanner could run before
or during CAM's initial setup, which would cause duplicate device
reprobes and announcements.

sys/param.h:
	Bump __FreeBSD_version to 1000039 for the inclusion of the
	PIM_RESCAN CAM path inquiry flag.

sys/cam/cam_ccb.h:
sys/cam/cam_xpt.c:
	Added a PIM_NOSCAN flag.  If a SIM sets this in the path
	inquiry ccb, then CAM won't rescan the bus in
	xpt_bus_regsister.

sys/dev/mps/mps_sas.c
	For versions of FreeBSD that have the PIM_NOSCAN path
	inquiry flag, don't freeze the sim queue during scanning,
	because CAM won't be scanning this bus.  Instead, hold
	up the boot.  Don't call mpssas_rescan_target in
	mpssas_startup_decrement; it's redundant and I don't
	know why it was in there.

	Set PIM_NOSCAN in path inquiry CCBs.

	Remove methods related to the internal rescan daemon.

	Always use async events to trigger a probe for EEDP support.
	In older versions of FreeBSD where AC_ADVINFO_CHANGED is
	not available, use AC_FOUND_DEVICE and issue the
	necessary READ CAPACITY manually.

	Provide a path to xpt_register_async() so that we only
	receive events for our own SCSI domain.

	Improve error reporting in cases where setup for EEDP
	detection fails.

sys/dev/mps/mps_sas.h:
	Remove softc flags and data related to the scanner thread.

sys/dev/mps/mps_sas_lsi.c:
	Unconditionally rescan the target whenever a device is added.

Sponsored by:	Spectra Logic
MFC after:	1 week
2013-07-22 18:37:07 +00:00
Scott Long
1610f95c56 Overhaul error, information, and debug logging.
Obtained from:	Netflix
MFC after:	3 days
2013-07-19 00:12:41 +00:00
Alan Somers
2ce303e83d sys/dev/mps/mps.c
sys/dev/mps/mps_user.c
	Fix uninitialized memory reference in mps_read_config_page.  It was
	referencing a field (params->hdr.Ext.ExtPageType) that would only be
	set when reading an Extended config page.  The symptom was that
	MPSIO_READ_CFG_PAGE ioctls would randomly fail with
	MPI2_IOCSTATUS_CONFIG_INVALID_PAGE errors.  The solution is to
	determine whether an extended or an ordinary config page is requested
	by looking at the PageType field, which should be available regardless.

	Similarly, mps_user_read_extcfg_header and mps_user_read_extcfg_page,
	which call mps_read_config_page, had to be fixed to always set the
	PageType field.  They were implicitly assuming that
	mps_read_config_page always operated on Extended pages.

Reviewed by:	ken
Approved by:	ken (mentor)
MFC after:	3 days
2013-06-04 22:32:33 +00:00
Alexander Motin
ee6b37b56b Fix NULL-dereference kernel panic in case of mps_attach() failure.
MFC after:	1 week
2013-05-22 02:15:07 +00:00
Steven Hartland
5d0b98f2c3 Fix uninitialized warning in mps
Reviewed by:	pjd (mentor)
Approved by:	pjd (mentor)
MFC after:	2 weeks
2013-05-03 10:37:59 +00:00
Alexander Motin
e5dfa058da MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning.  NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph".  If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
2013-04-14 09:55:48 +00:00
Alexander Motin
47bf7bcb97 Except one case mps(4) driver does not touch the data and works well with
unmapped I/O.  That one exception is access to INQUIRY VPD request result.
Those requests are never unmapped now, but to be safe add respective check
there and allow unmapped I/O for the SIM by setting PIM_UNMAPPED flag.
2013-03-28 11:24:30 +00:00
John Baldwin
f9379dc411 Replace the TDP_NOSLEEPING flag with a counter so that the
THREAD_NO_SLEEPING() and THREAD_SLEEPING_OK() macros can nest.

Reviewed by:	attilio
2013-03-01 22:03:31 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Eitan Adler
db702c59cf remove duplicate semicolons where possible.
Approved by:	cperciva
MFC after:	1 week
2012-10-22 03:00:37 +00:00
John W. De Boskey
a3554325a5 Don't lose the 255'th disk behind the initiator.
Reviewed by:	ken@
MFC after:	1 month
2012-10-19 23:42:45 +00:00
Kenneth D. Merry
0e28d282b7 Add casts to unbreak the i386 PAE build for the mps(4) driver.
MFC after:	3 days
Prompted by:	Garrett Cooper
2012-10-02 23:04:12 +00:00
Eitan Adler
96240c89f0 Correct double "the the"
Approved by:	cperciva
MFC after:	3 days
2012-09-14 21:28:56 +00:00
Alexander Motin
61c49b4dd1 Several fixes to allow firmware/BIOS flash access from user-level:
- remove special handling of zero length transfers in mpi_pre_fw_upload();
 - add missing MPS_CM_FLAGS_DATAIN flag in mpi_pre_fw_upload();
 - move mps_user_setup_request() call into proper place;
 - increase user command timeout from 30 to 60 seconds;
 - avoid NULL dereference panic in case of firmware crash.
Set max DMA segment size to 24bit, as MPI SGE supports it.
Use mps_add_dmaseg() to add empty SGE instead of custom code.
Tune endianness safety.

Reviewed by:	Desai, Kashyap <Kashyap.Desai@lsi.com>
Sponsored by:	iXsystems, Inc.
2012-08-01 17:31:31 +00:00
Alexander Motin
1914fdecbe Fix kernel panic on camcontrol reset for specific target, caused by
uninitialized cm_targ in mpssas_action_resetdev().

Reviewed by:	Desai, Kashyap <Kashyap.Desai@lsi.com>
Sponsored by:	iXsystems, Inc.
MFC after:	3 days
2012-08-01 12:24:13 +00:00
Christian Brueffer
1d50dd1f08 Fix a small memory leak in mpssas_get_sata_identify(). The change has been
submitted upstream as well.

Reviewed by:	ken, scottl
Obtained from:	DragonFly BSD (change df8658e030226dd015cff9749452666d8fe1e87b)
MFC after:	5 days
2012-07-18 09:06:07 +00:00
Kenneth D. Merry
82e4855cad Change the mps(4) driver to only scan a target if that is what is
needed instead of scanning the full bus every time.

Submitted by:	mav
Discussed with:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
MFC after:	3 days
2012-06-29 17:00:52 +00:00
Kenneth D. Merry
be4aa869c1 Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version
14.00.00.01-fbsd.

Their description of the changes is as follows:

1.	Copyright contents has been changed in all respective .c
	and .h files

2.	Support for WRITE12 and READ12 for direct-io (warpdrive only)
	has been added.

3.      Driver has added checks to see if Drive has READ_CAP_16
	support before sending it down to the device.
	If SPC3_SID_PROTECT flag is set in the inquiry data, the
	device supports protection information, and must support
	the 16 byte read capacity command, otherwise continue without
	sending read cap 16. This will optimize driver performance,
	since it will not send READ_CAP_16 to the drive which does
	not have support of READ_CAP_16.

4.      With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not
	use DELAY() which is busy loop implementation.
	It will use <msleep> (Better way to sleep without busy
	loop). Also from the HBA reset code path and some other
	places, DELAY() is replaced with msleep() or "pause()",
	which is based on sleep/wakeup style calls.  Driver use
	msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP
	flags to avoid busy loop which is not required all the
	time.e.a

	a. While driver is getting loaded, driver calls most of the
	   commands with NO_SLEEP.
	b. When Driver is functional and it needs Reinit of HBA,
	   CAN_SLEEP flag is used.

5.	<mpslsi> driver is not Endian safe. It will not work on Big
	Endian machines	like Sparc and PowerPC platforms because it
	assumes it is running on a Little Endian machine.

	Driver code is modified such way that it does not assume CPU
	arch is Little Endian.
	a. All places where Driver interacts from HBA to Host, it
	   converts Little Endian format to CPU format.
	b. All places where Driver interacts from Host to HBA, it
	   converts CPU format to Little Endian.

6.	Findout memory leaks in FreeBSD Driver and resolve those,
	such as memory leak in targ's luns creation/deletion.
	Also added additional checks to see memory allocation
	success/fail.

7.	Add loginfo prints as debug message, i.e. When FW sends any
	loginfo, Driver should print those as debug message.
	This will help for debugging purpose.

8.	There is possibility to get config request timeout. Current
	driver is able to detect config request timetout, but it does
	not do anything on config_request timeout.  Driver should
	call mps_reinit() if any request_poll (which is called as
	part of config_request) is time out.

9.	cdb length check is required for 32 byte CDB. Add correct mpi
	control value for 32 bit CDB as below while submitting SCSI IO
	Request to controller.
	mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;

10.	Check the actual status of Message unit reset
	(mps_message_unit_reset).Previously FreeBSD Driver just writes
	MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack
	(it just wait for 50 millisecond).  So, Driver now check the
	status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing
	it to the FW.

	Now it also checking for whether doorbell ack uses msleep with
	proper sleep flags, instead of <DELAY>.

11.	Previously CAM does not detect Multi-Lun Devices. In order to
	detect Multi-Lun Devices by CAM the driver needs following change
	set:
	a. There is "max_lun" field which Driver need to set based on
	   hw/fw support. Currently LSI released driver does not set
	   this field.
	b. Default of "max_lun" should not be 0 in OS, but it is
	   currently set to 0 in CAM layer.
	c. Export max_lun capacity to 255

12.	Driver will not reset target info after port enable complete and
	also do Device removal when Device remove from FW.  The detail
	description is as follows
	a. When Driver receive WD PD add events, it will add all
	   information in driver local data structure.
	b. Only for WD, we have below checks after port enable
	   completes, where driver clear off all information retrieved
	   at #1.
	if ((sc->WD_available &&
             (sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) ||
             (sc->WD_valid_config && (sc->WD_hide_expose ==
                            MPS_WD_HIDE_IF_VOLUME)) {
		  // clear off target data structure.
	}
	It is mainly not to attach PDs to OS.

	FreeBSD does bus rescan as older Parallel scsi style. So Driver
	needs to handle which Drive is visible to OS.  That is a reason
	we have to clear off targ information for PDs.

	Again, above logic was implemented long time ago. Similar concept
	we have for non-wd also. For that, LSI have introduced different
	logic to hide PDs.

	Eventually, because of above gap, when Phy goes offline, we
	observe below failure. That is what Driver is not doing complete
	removal of device with FW. (which was pointed by Scott)
	Apr  5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove
	Apr  5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe

	Now Driver will not reset target info after port enable complete
	and also will do Device removal when Device remove from FW.

13.	Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID"
	error code on request to the Target IDs that have no devices
	conected at that moment.  As if "CAM_TID_INVALID" error code
	is returned to the CAM Layaer then it results in a huge chain
	of errors in verbose kernel messages on boot and every
	hot-plug event.

Submitted by:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
MFC after:	3 days
2012-06-28 03:48:54 +00:00
Kevin Lo
c61325d009 Correct sizeof usage
Obtained from:	DragonFly
2012-06-25 05:41:16 +00:00
Kenneth D. Merry
17a46b474f Make the mps(4) module depend on the cam module.
Submitted by:	Mykola Dzham <i@levsha.me>
MFC after:	3 days
2012-03-07 22:39:11 +00:00
Kenneth D. Merry
ecef54656d Set the max_lun field of the path inquiry CCB to 8.
This allows LUNs greater than 0 to be probed.  It can be increased later if
need be.

This brings back SVN rev 224973, which was inadvertently removed with the
import of the LSI driver.

Reported by:	dwhite
MFC after:	3 days
2012-02-14 22:27:43 +00:00
Kenneth D. Merry
bab893586b Return BUS_PROBE_DEFAULT instead of BUS_PROBE_VENDOR from the mps driver
probe routine.

This will allow LSI to ship drivers that return BUS_PROBE_VENDOR to
override the in-tree version of the driver.

MFC after:	3 days
2012-02-11 00:28:30 +00:00
Kenneth D. Merry
653c521f8d Bring in a number of mps(4) driver fixes from LSI:
1.  Fixed timeout specification for the msleep in mps_wait_command().
    Added 30 second timeout for mps_wait_command() calls in mps_user.c.

2.  Make sure we call mps_detach_user() from the kldunload path.

3.  Raid Hotplug behavior change.

    The driver now removes a volume when it goes to a failed state,
    so we also need to add volume back to the OS when it goes to
    opitimal/degraded/online from failed/missing.

    Handle raid volume add and remove from the IR_Volume event.
4.  Added some more debugging information.

5.  Replace xpt_async(AC_LOST_DEVICE, path, NULL) with
    mpssas_rescan_target().

    This is to work around a panic in CAM that shows up when adding a
    drive with a rescan and removing another device from the driver thread
    with an AC_LOST_DEVICE async notification.

    This problem was encountered in testing with the LSI sas2ircu utility,
    which was used to create a RAID volume from physical disks.  The driver
    has to create the RAID volume target and remove the physical disk
    targets, and triggered a panic in the process.

    The CAM issue needs to be fully diagnosed and fixed, but this works
    around the issue for now.

6.  Fix some memory initialization issues in mps_free_command().

7.  Resolve the "devq freeze forever" issue.  This was caused by the
    internal read capacity command issued in the non-head version of the
    driver.  When the command completed with an error, the driver wasn't
    unfreezing thd device queue.

    The version in head uses the CAM infrastructure for getting the read
    capacity information, and therefore doesn't have the same issue.

8.  Bump the version to 13.00.00.00-fbsd. (this is very close to LSI's
    internal stable driver 13.00.00.00)

Submitted by:	Kashyap Desai <Kashyap.Desai@lsi.com>
MFC after:	3 days
2012-02-09 00:16:12 +00:00
Kenneth D. Merry
d043c56453 Bring in the LSI-supported version of the mps(4) driver.
This involves significant changes to the mps(4) driver, but is not a
complete rewrite.

Some of the changes in this version of the driver:
 - Integrated RAID (IR) support.
 - Support for WarpDrive controllers.
 - Support for SCSI protection information (EEDP).
 - Support for TLR (Transport Level Retries), needed for tape drives.
 - Improved error recovery code.
 - ioctl interface compatible with LSI utilities.

mps.4:		Update the mps(4) driver man page somewhat for the driver
		changes.  The list of supported hardware still needs to be
		updated to reflect the full list of supported cards.

conf/files:	Add the new driver files.

mps/mpi/*:	Updated version of the MPI header files, with a BSD style
		copyright.

mps/*:		See above for a description of the new driver features.

modules/mps/Makefile:
		Add the new mps(4) driver files.

Submitted by:	Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by:	ken
MFC after:	1 week
2012-01-26 18:17:21 +00:00
Alexander Motin
a0b435f856 Set maximum I/O size for mps(4) to MAXPHYS. Looking into the code, I see
no reason why it should be limited to 64K of DFLTPHYS. DMA data tag is any
way set to allow MAXPHYS, S/G lists (chain elements) are sufficient and
overflows are also handled. On my tests even 1MB I/Os are working fine.

Reviewed by:	ken@
2011-12-28 22:49:28 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Marius Strobl
50e66535b9 Sync with ahc(4)/ahd(4)/sym(4) etc:
Zero any sense not transferred by the device as the SCSI specification
mandates that any untransferred data should be assumed to be zero.

Reviewed by:	ken
2011-10-07 21:23:42 +00:00
Kenneth D. Merry
1cc052e80f Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00