Commit Graph

26 Commits

Author SHA1 Message Date
Marius Strobl
136eda1dc3 - Add C-bus and ISA front-ends for le(4) so it can actually replace
lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP
  network cards as lnc(4) did and additionally a couple of PNP ones.
  Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S
  and is untested due to lack of such hardware, but given that's it's
  based on the respective lnc(4) and not too different from the ISA
  front-end it should be highly likely to work.
- Remove the descriptions of le(4), which where converted from lnc(4),
  from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common
  one in sys/conf/NOTES.
2006-05-17 21:25:23 +00:00
Yoshihiro Takahashi
7d11a60e60 Switch from the lnc driver to the le driver. But C-NET(98)S support is
dropped.
2006-05-15 11:15:34 +00:00
Yoshihiro Takahashi
819766797e Switch from OLDCARD to NEWCARD on pc98. 2005-09-27 13:10:24 +00:00
Yoshihiro Takahashi
e3e5366a05 Backout revision 1.20. I was a misunderstanding.
Pointed out by:	Watanabe Kazuhiro
Pointy hat to:	nyan
2005-03-10 13:07:32 +00:00
Warner Losh
5562482940 Catchup to wd removal 2005-01-04 07:26:51 +00:00
Yoshihiro Takahashi
e1dd8f11d1 Disable ed1 - ed12. 2004-10-24 12:07:02 +00:00
Yoshihiro Takahashi
2b117a5ab9 Rename the sound device drivers. 2004-07-17 10:22:42 +00:00
Warner Losh
c3959ad01c The bs driver was replaced with the ct(pc98) driver. takahashi-san
(nyan) says this driver is now obsolete and can be removed.
2004-04-07 05:44:51 +00:00
Yoshihiro Takahashi
877cbbe8a8 Don't use the pcic polling. 2004-03-16 12:40:11 +00:00
Warner Losh
26b74a3cdb comment out bs and wd entries in the hints 2004-03-14 23:02:07 +00:00
Søren Schmidt
8ba4488cea Add support for the PC98 platform to the ATA driver.
This mostly consists of functionality to serialize accesses to
the two ATA channels (which can also be used to "fix" certain
PCI based controllers).
Add support for Acard controllers.
Enable the ATA driver in PC98 GENERIC, and add device hints.
Update man page with latest support.

The PC98 core team has kindly provided me with a PC98
machine that made this all possible, thanks to all that
contributed to that effort, without that this would
probably newer have been possible..

Approved by: re@
2002-12-03 20:20:44 +00:00
Yoshihiro Takahashi
7fa62ecb09 Add hints for wd1, wd2 and wd3. 2002-11-03 06:52:43 +00:00
Yoshihiro Takahashi
43b6e2a273 MFi386: revision 1.10 2002-10-23 12:54:05 +00:00
Yoshihiro Takahashi
f974f604ef MFi386: revision 1.9. 2002-10-14 12:07:39 +00:00
Yoshihiro Takahashi
6cac891491 Added the pmc driver which supports power management controller of
old NEC PC-98NOTE.

Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
MFC after:	1 week
2001-10-24 14:46:40 +00:00
KATO Takenori
7cd8375d89 Commented out pcm hints.
Pointed out by:	nyan
2001-06-26 08:27:00 +00:00
Yoshihiro Takahashi
bedee18193 Added another wd33c93 based SCSI card driver which replaces the bs driver.
Now, default is still bs.

Submitted by:	nyan and non.
Obtained from:	NetBSD/pc98
2001-02-27 12:34:01 +00:00
Yoshihiro Takahashi
3cf9cf0797 Merged from sys/i386/conf/GENERIC.hints revision 1.6 and 1.7. 2001-01-13 13:23:22 +00:00
Yoshihiro Takahashi
4fca76da0c Removed the VoxWare sound drivers. 2000-12-10 10:02:32 +00:00
Yoshihiro Takahashi
8297c2fc98 Fixed to support 3Com 3C569B for PC-98.
Submitted by:	"Hirokazu WATANABE" <gwna@geocities.co.jp>
2000-12-09 04:25:07 +00:00
Yoshihiro Takahashi
0a917604f0 Added NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and PC-9801N-J02R
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.

Submitted by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from:	NetBSD/pc98
2000-10-02 14:27:20 +00:00
Yoshihiro Takahashi
ac1140b8d5 Disabled serial console. 2000-08-19 10:19:43 +00:00
Yoshihiro Takahashi
82583dd564 - Fixed the conversion to bus_space interface.
- Added PC-98 Cbus devices support.
  The original patch is submitted by chi@bd.mbn.or.jp (Chiharu Shibata)
- Removed old ed driver.
2000-08-17 12:15:45 +00:00
Yoshihiro Takahashi
4e281f317d Merged from sys/i386/conf/GENERIC.hints revision 1.3. 2000-08-08 11:56:45 +00:00
Yoshihiro Takahashi
c04eccbd1e - Moved "hint" informations to GENERIC.hints.
- Cosmetic changes.
2000-06-17 14:46:20 +00:00
Peter Wemm
f71c01cc52 Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.

config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel.  You can reconfigure your
isa devices with the likes of this at loader(8) time:
  set hint.ed.0.port=0x320

userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.

It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8).  See the "hints" directive in GENERIC
as an example.

All device wiring has been moved out of config(8).  There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file.  If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you.  You can also compile in the
hints directly with:  hints "device.hints"  as well.

There are a few things that I'm not too happy with yet.  Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it.  However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built.  A stack of man4 pages will need updating. :-/

Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated.  eg:  'device fe 4' will compile the fe driver with NFE set
to 4.  You can then set hints for 4 units (0 - 3).  Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this.  This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.

Please exercise EXTREME CAUTION when transitioning!

Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00