instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
r359461 introduced this nifty script to centralize these things, so add
shm_open.c there to remove a total of one (1) bad example from
Makefile.inc1.
Looked over by: emaste
For head/, this will remain eternally default-on to maintain the status quo.
For stable/ branches, it should be flipped to default-off to maintain the
status quo.
There's value in being able to flip it one way or the other easily on head
or stable branches, whether you want to gain some performance back on head/
(for machines there's little chance you'll actually hit an assertion) or
potentially diagnose a problem with the version of llvm on an older branch.
Currently, stable branches get the CFLAGS+= -ndebug line uncommented; going
forward, they will instead have the default of LLVM_ASSERTIONS flipped.
Reviewed by: dim, emaste, re (gjb)
MFC after: 1 week
MFC note: flip the default of LLVM_ASSERTIONS
Differential Revision: https://reviews.freebsd.org/D24264
It's rather awkward to debug issues with the dependency cleanup hacks
when implemented via make. Add a cleanup shell script and move the
libomp hack there as an initial example.
Reviewed by: brooks
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24228
In-tree gdb is essentially obsolete. We kept it for sparc64 (because
gdb in ports lacked sparc64 support) and as a fallback for crashinfo.
gdb was installed to /libexec on all archs other than sparc64, where the
WITHOUT_GDB_LIBEXEC option was default, with gdb installed to /usr/bin.
With sparc64's retirement WITH_GDB_LIBEXEC became the default for all
architectures, but it was still possible to set it off and install gdb
into /usr/bin.
As the next step in gdb's retirement, remove the option and install gdb
only into /libexec as the crashinfo fallback. We expect users to install
the gdb port or package for debugging. The in-tree gdb lacks support for
a number of supported architectures and does not support contemporary
DWARF debug info.
Reviewed by: jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24227
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
Now that LLD 10 is out, and required patches have landed, we are now ready
to finally switch away from the ancient in-tree ld.bfd.
Special thanks to Fangrui Song for many hours of work on getting the
32-bit powerpc lld ready for prime-time.
Reviewed by: emaste (earlier revision), jhibbits
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24111
Having kyua in the base system will simplify automated testing in CI and
eliminates bootstrapping issues on new platforms.
The build of kyua is controlled by WITH(OUT)_TESTS_SUPPORT.
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24103
autofs was introduced with FreeBSD 10.1 and is the supported method for
automounting filesystems. As of r296194 the amd man page claimed that it
is deprecated. Remove it from base now; the sysutils/am-utils port is
still available if necessary.
Discussed with: cy
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
It does extremely useful things like execute sendmail and spew dubiously
accurate factoids.
From the feedback, it seems like it is an essential utility in a modern unix
and not at all a useless bikeshed. How do those Linux people live without it?
Reverts r358561.
elfctl is a tool for modifying the NT_FREEBSD_FEATURE_CTL ELF note,
which contains a set of flags for enabling or disabling vulnerability
mitigations and other features.
Reviewed by: csjp, kib
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23910
Now that we no longer have GCC 4.2.1 in the tree and can assume FreeBSD
is being built with a C++11 compiler available, we can use BSDL dtc
unconditionally and retire the GPL dtc.
GPL dtc now has FreeBSD CI support via Cirrus-CI to help ensure it
continues to build/work on FreeBSD and is available in the ports tree
if needed.
The copy of (copyfree licensed) libfdt that we actually use is in
sys/contrib/libfdt so the extra copy under contrib/dtc/libfdt can be
removed along with the rest of the GPL dtc.
Reviewed by: kevans, ian, imp, manu, theraven
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23192
LLVM's libunwind is used on all FreeBSD-supported CPU architectures and
is a required component.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23123
As described in Warner's email message[1] to the FreeBSD-arch mailing
list we have reached GCC 4.2.1's retirement date. At this time all
supported architectures either use in-tree Clang, or rely on external
toolchain (i.e., a contemporary GCC version from ports).
GCC 4.2.1 was released July 18, 2007 and was imported into FreeBSD later
that year, in r171825. GCC has served us well, but version 4.2.1 is
obsolete and not used by default on any architecture in FreeBSD. It
does not support modern C and does not support arm64 or RISC-V.
Thanks to everyone responsible for maintaining, updating, and testing
GCC in the FreeBSD base system over the years.
So long, and thanks for all the fish.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2020-January/019823.html
PR: 228919
Reviewed by: brooks, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23124
We've grown to also require libthr and libprivatestd to be explicitly linked
in here, so do this now to fix freebsd-wifi-build.
Submitted by: Pavel Timofeev <timp87 gmail com>
Use of binutils is being incrementally reduced. The specific binutils
are listed in the WITH_BINUTILS and WITHOUT_BINUTILS descriptions; there
is no need to list the specific tools again in the descriptions for the
_BOOTSTRAP options.
MFC after: 1 week
simple_httpd was granted a reprieve from the picobsd removal based on having
some reported user; it turns out this user isn't actually using the version
in base and merging their changes would be difficult at this point, so the
version in base will simply continue to rot. Retire it now, it may make a
comeback to ports with the improved version.
No notice issued because its current visibility has only been for ~3
months, and a notice has been previously issued about picobsd removal.
In order to do so we need to install the msdosfs headers to the bootstrap
sysroot and avoid includes of kernel headers that may not exist on every
host (e.g. sys/lockmgr.h). This change should allow bootstrapping of makefs
on FreeBSD 11+ as well as Linux and macOS.
We also have to avoid using the IO_SYNC macro since that may not be
available. In makefs it is only used to switch between calling
bwrite() and bdwrite() which both call the same function. Therefore we
can simply always call bwrite().
For our CheriBSD builds we always bootstrap makefs by setting
LOCAL_XTOOL_DIRS='lib/libnetbsd usr.sbin/makefs' and use the makefs binary
from the build tree to create a bootable disk image.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D23201
and the headers. If the user decides to install the system without Casper
support, then the Casper functions are mocked, but they still exist in
the system.
PR: 242971
MFC after: 2 weeks
