One could run this from any directory, but it's designed to do
regression testing on sys/boot (it only tests on a subset of
architectures since all of them would take a lot longer and not help).
This will also ensure that future commits to sys/boot compile
everywhere.
Sponsored by: Netflix
diff (and man page) are not from GNU, as of r317209, and should not be
deleted if WITHOUT_GNU_DIFF is set. (WITHOUT_GNU_DIFF still controls
whether diff3 is built.)
Sponsored by: The FreeBSD Foundation
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
/usr/local/etc gets created and populated by packages. However, if no
packages are installed when setup_nanobsd is run, this symlink won't
get created, causing problems if packages are installed later (say on
first boot). Therefore, always create the symlink and etc/local. It
does no harm and may help.
Inspired by crochet issue #183 (consuingly says NanoBSD, means crochet)
Sponsored by: Netflix
This function was only set in legacy.sh and only at the very end after
the disk image had been successfully created. The only difference will be
that the message 'Error encountered. Please check...' will not appear if
nanobsd.sh exits with an error after the disk image has been created.
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
== Rationale ==
r295380 introduced "make check" and consolidated means for running
test code in an attempt to simplify running tests. One could either
install files/libraries/programs and run "make check", or run "make check"
with an explicit CHECKDIR, e.g., `make check CHECKDIR=$(make -V.OBJDIR)``.
One criticism that was received is that "make check" should be run with
the intent of making dev->test->commit easier, which means that the target
audience's workflow should be developers. One developer pattern available
in other opensource projects is to run test code from a developer sandbox,
instead of installing to a system.
== Method ==
This approach is slightly different from the standard approach, in the sense
that it builds and installs into a deterministic directory under .OBJDIR (as I call it,
the "sandbox"), then runs "make check" against that. In the event the test
run is successful, the deterministic directory is removed to save space.
== Approach ==
bsd.lib.mk, bsd.prog.mk:
To support this functionality, a new variable `HAS_TESTS` is being added.
HAS_TESTS enables appropriate behavior with bsd.lib.mk and bsd.prog.mk, as
follows:
- Add "make check" as an available target from the directory.
- Pass down appropriate variables via ${TESTS_ENV}, i.e.,
${TESTS_LD_LIBRARY_PATH} and ${TESTS_PATH}.
One should add "HAS_TESTS" to directories containing tests in them, e.g. from
bin/sh/Makefile,
HAS_TESTS=
SUBDIR.${MK_TESTS}+= tests
HAS_TESTS doesn't automatically add the tests subdirectory for flexibility
reasons.
bsd.opts.mk, src.opts.mk:
- The knob ${MK_MAKE_CHECK_USE_SANDBOX} has been added, both to explicitly
direct (internally) when to set a deterministic ${DESTDIR} and to also allow
users to disable this behavior globally, i.e., via src.conf.
- MK_TESTS has been promoted from src.opts.mk to bsd.opts.mk to leverage
syntactic sugar for having MK_TESTS be a dependency for
MK_MAKE_CHECK_USE_SANDBOX, but to also ensure that src.opts.mk isn't required
to use suite.test.mk (which is a dependency of bsd.test.mk).
suite.test.mk:
- beforecheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Build.
-- Run "make hierarchy" on the sandbox dir.
-- Install the tests/files to the sandbox dir.
- aftercheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Remove the sandbox dir.
Again, because the dependency order set in bsd.test.mk is
beforecheck -> check -> aftercheck, "make check" will not be run unless
"beforecheck" completes successfully, and "aftercheck" will not be run unless
"beforecheck" and "check" complete successfully.
== Caveats ==
- This target must either be run with MK_INSTALL_AS_USER or as root. Otherwise
it will fail when running "make install" as the default user/group for many
makefiles when calling INSTALL is root/wheel.
- This target must be run from a suitable top-level directory. For example,
running tests from `tests/sys/fs/tmpfs` won't work, but `tests/sys/fs` will,
because `tests/sys/fs/tmpfs` relies on files installed by `tests/sys/fs`.
- Running MK_INSTALL_AS_USER may introduce determinism issues. However, using
it could identify deficiences in tests in terms of needing to be run as
root, which are not properly articulated in the test requirements.
- The doesn't negate the need for running "make installworld" and
"make checkworld", etc. Again, this just is intended to simplify the
dev->test->commit workflow.
== Cleanup done ==
- CHECKDIR is removed; one can use "MK_MAKE_CHECK_USE_SANDBOX=no" to enable
"legacy" (r295380) behavior.
MFC after: 2 months
Relnotes: yes (CHECKDIR removed; "make check" behavior changed)
Requested by: jhb
Reviewed by: arch (silence), testing (silence)
Differential Revision: D11905
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).
They should *not* be in the rcmds package which is disabled by default. We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."
This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.
This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.
PR: 220953
Reported by: peter@, jhb@
Differential Revision: https://reviews.freebsd.org/D11743
This method is required for querying file / disk sizes which is needed
at least for finding all copies of ZFS VDEV labels.
Reported by: ngie
MFC after: 1 week
- Standardize on SRCTOP instead of .CURDIR-relative paths
- Use LIBADD instead of a mix of specifying -lgeom via DPADD/LDADD/LDFLAGS.
Specifying -lgeom via LDFLAGS is an especially unnecessary and odd
pattern.
MFC after: 1 week
pager_output(..) has always returned int. For some reason (probably the
clang 5.0 update), this mismatch now results in an error with CC=clang.
MFC after: 1 week
The wlanwds code was just creating a clone VAP without specifying the MAC
address to use for said clone VAP. This meant that if an interface
was cloned from an AP interface that wasn't the first created VAP
(which shares the same MAC as the parent physical interface by default)
then the cloned interface would have the wrong MAC and traffic wouldn't work.
Besides chip bugs (ha!) this isn't a requirement.
So, teach wlanwds to:
* look up the link layer address for a given interface (which really should
be a library interface, and will likely quickly become one);
* use this when creating a cloned interface for a DWDS peer;
* (net80211 already has the infrastructure to do this, it just needed to be
used);
* add some extra logging to see what MAC addresses, parent interfaces, etc
are being created.
Whilst here, add a reminder that I should extend this to include monitoring
a specific VAP for DWDS updates rather than just the parent interface.
This is the first step in allowing for multiple DWDS hops, which is a
pre-requisite for adrian's house having wifi in the single upstairs room.
Tested:
* AR9380, DWDS AP + AP mode - with DWDS AP being the second VAP created
with a different MAC address;
* AR9331 (Carambola2), AP + DWDS STA;
* passing traffic
TODO:
* fix 802.11s so this DWDS stuff is no longer required!
.cvs into the image.
This makes .gitignore files in the working tree appear in the final
tree...
PR: 192178
Submitted by: Jason Unovitch
Sponsored by: Netflix
MFC After: 3 days
The defualt NANO_PACKAGE_LIST is *, which fails to work
properly. Expand glob characters and make sure that we install the
special pkg package first.
Sponsored by: Netflix
Submitted by: wout at canodus dot be
PR: 219405
MFC After: 3 days
`MK_ZONEINFO_LEAPSECONDS_SUPPORT == yes` and
`MK_ZONEINFO_OLD_TIMEZONES_SUPPORT == yes`.
Keep `LEAPSECONDS` and `OLDTIMEZONES` for backwards compatibility,
but print out a warning notifying users that they should use the new
variables, in an effort to migrate them to the variables. This is being
done mostly for automated build tools, etc, that might rely on these
variables being set. The variables will be removed in the future on
^/head, e.g., after ^/stable/12 is cut.
MFC after: 1 month
Relnotes: yes
Reviewed by: bdrewery
Differential Revision: D11376
- Always unlink $cmd after exit via END block.
- The tests don't function well if kern.geom.debugflags != 0. Save debugflags,
then restore them at the end of the test.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
This will allow the tool to be used with arbitrary geom(4) classes, like GEOM.
Specify class=PART explicitly in the tester to keep existing behavior.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Before this test just checked scenario of setting and removing the accept
filter at different states of the socket. Now it also checks that accept
filter works: we connect to the server, and then check that we can't accept,
then we send 1 byte of data and check again.
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
- Use a new 'char *key' to allocate storage for keys and assign the
pointer to the session2_op 'const char *' members after the key is
initialized.
- Mark the 'find' variable used in crfind() static so that crfind()
doesn't return a pointer to stack garbage.
Reported by: olivier (1)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
roff documentation from the build.
Those documents will be added to the doc tree and distributed as PDF from
the documentation website. As they are valuable has history, but do not match
current FreeBSD
Further more, the ascii format we were using to distribute them is not really
accurate for such documents.
more details:
https://lists.freebsd.org/pipermail/freebsd-arch/2017-May/018211.html
This adds a separate library for supporting std::experimental features.
It is purposefully static, and must be explicitly linked into programs
using -lc++experimental.
PLEASE NOTE: there is NO WARRANTY as to any stability or continuing
existence of the features in the std::experimental parts of the C++
library!
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D10840
src.conf(5) knobs
This will allow consumers of FreeBSD to use the unmodified configuration
files out of the box more than previously.
Both newsyslog.conf and syslog.conf:
- /var/log/lpd-errs (MK_LPR != no)
- /var/log/ppp.log (MK_PPP != no)
- /var/log/xferlog (MK_FTP != no)
newsyslog.conf:
- /var/log/amd.log (MK_AMD != no)
- /var/log/pflog (MK_PF != no)
- /var/log/sendmail.st (MK_SENDMAIL != no)
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
wlanwds monitors the physical interface for DWDS requests from VAPs,
but the clone is created against the physical interface. So, if you
have a secondary VAP setup (with a separate, non-physical-default MAC
address) which is configured for DWDS, the temporary DWDS VAPs created
will have the MAC of the parent physical interface and NOT the
actual cloned interface + MAC.
This .. stumped me for a few minutes.
Maybe I'll fix it. Maybe I won't. At least I now have DWDS+encryption
working at home.
Tested:
* yes, with DWDS 11n repeaters now working on freebsd.
By default this logs to syslog only, not stderr. It makes it difficult
to debug exactly what's going on. So allow '-e' to log to stderr so I
have a chance of actually debugging wlanwds /dynamic WDS (DWDS) issues.
When this option is enabled, only gdb and kgdb are installed to
/usr/libexec for use by crashinfo(8). Other bits of GDB such as
gdbserver and gdbtui are not installed. For this option to be
effective, GDB must be enabled.
Rework r317094 to re-enable GDB on all platforms but enable
GDB_LIBEXEC on platforms for which the GDB in ports is a superset of
functionality.
Reviewed by: emaste, kib
Suggested by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10449
If the commands had failed previously, it would press on and result in a
series of cascading failures. Fail early and continue on to the next case
instead of executing additional commands after a previously failed series
of steps.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
- Make the logfile for $out be built off the basename for $cmd, instead of $cmd.
(r317292 broke this assumption).
- Rename $mntpt to $mntpt_prefix for clarity, as this variable is a prefix for
mountpoints.
- Reindent the umount directive block while here to match the rest of the code.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
The `remove` verb hasn't been present in geom_part*(4) for well
over a decade, if ever. I couldn't find any references to it in
^/stable/5 at least, which is around the timeframe that this test
was written.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
- Declare $count with the `my` scope operator to permit `use strict`.
- Add `use strict`.
- Use `use warnings` instead of using `-w` in the shebang.
- Don't unlink $cmd when done (prevents unnecessary rebuilding).
- Improve the error message when running with insufficient permissions, e.g.,
non-root.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
This is being done to reduce ambiguity and to make the tests more portable
in the future to other locations in the source tree.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
The GNU extension bits in the base system are old, no longer faithful
to upstream, and surprising in some regards. Switch to documenting
WITH_GNU_GREP_COMPAT and default GNU_GREP_COMPAT to OFF in the name of
good behavior.
According to http://www.regular-expressions.info, GNU extensions:
- Add missing quantifiers to BREs: \?, \+
- Add branching to BREs: \|
- Add backreferences (\1 through \9) to EREs
- Add \w, \W, \s, and \S corresponding to :alnum:, [^[:alnum:]],
:space:, and [^[:space:]] respectively
- Add word boundaries and anchors:
\b: word boundary
\B: not word boundary
\<: Strt of word
\>: End of word
\`: Start of subject string
\': End of subject string
These extensions are still available in /usr/bin/grep by default today,
as it is still GNU grep. As part of the bsdgrep migration plan these
extensions may be added to bsdgrep's regex support if necessary.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10114
Bugs have been found in the fastmatch implementation as used in bsdgrep.
Some have been fixed (r316495) while fixes for others are in review
(D10098).
In comparison with the fastmatch implementation, Kyle Evans found that:
- regex(3)'s performance with literal expressions offers a speed
improvement over fastmatch
- regex(3)'s performance, both with simple BREs and EREs, seems to be
comparable
The regex implementation was imported in r226035, and the commit message
reports:
This is a temporary solution until the whole regex library is
not replaced so that BSD grep development can continue and the
backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost
yet but several minor bugs have been found and fixed.
Introduce a WITH_/WITHOUT_BSD_GREP_FASTMATCH knob to support testing
of both approaches.
PR: 175314, 194823
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: bdrewery (in part)
Differential Revision: https://reviews.freebsd.org/D10282
rpcbind(8) with/without warmstart support.
The knob defaults to off to preserve POLA for the feature.
See rpcbind(8) for more details about the warmstart feature.
MFC after: 7 weeks
Relnotes: yes
Sponsored by: Dell EMC Isilon
These have no effect (and WITHOUT_GNU is documented as having no
effect). I intend to later introduce a WITHOUT_GPL knob to serve a
similar purpose as WITHOUT_GNU's previously documented intent, but with
a more accurate name. To avoid confusion over the transition though just
remove the existing, nonfunctional ones.
/etc/pam.d/ftp* should be installed with MK_FTP != no and
/etc/pam.d/telnetd should be installed when MK_TELNET != no.
MFC after: 7 weeks
Sponsored by: Dell EMC Isilon
Copying the source VCS ID from WITH_/WITHOUT_* into the generated
src.conf.5 is not necessary, as it is generally possible to determine
the same information using the VCS to examine commit metadata. The
individual source files also match the name of the option recorded in
the generated file, so it is clear from where the content originated.
The copied IDs generate extraneous, non-content noise in the generated
src.conf.5 in some cases, including the first time the file is generated
on a stable branch. In addition, the source file $FreeBSD$ tags are not
expanded by git or other non-Subversion VCSs, which means that makeman
previously could not be used in a non-Subversion working tree.
I accept that there's some desire to keep these, but on balance believe
there is more benefit in removing them.
Reviewed by: imp, ngie
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7997
Add WITH_LLD_BOOTSTRAP and WITHOUT_LLD_BOOTSTRAP knobs, similar to the
Clang bootstrap knobs.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10249
That doesn't work (mandoc complains about the macro being empty).
That's what I get for being clever and not verifying before committing
things again *sigh*.
MFC after: 1 month
X-MFC with: r315766
Partyhat to: ngie
Sponsored by: Dell EMC Isilon
