max
0db133d0e1
Change the loader.rc in the boot floppy to:
...
1. Enable use of serial console for installation by using autoboot
instead of boot.
2. Beep when the mfs root floppy needs to be placed in the fdd.
3. Beep again when mfs root image is loaded and the loader waits
for ten seconds before it starts booting for any input. (Serial
console users can say " boot -h" here.)
1999-04-25 16:42:46 +00:00
jkh
2d3f68eb3d
Remove the registration stuff; we're redoing this and the emailed
...
registrations have a high failure rate for various reasons.
1999-04-24 01:53:55 +00:00
obrien
3c9ea1572e
Add Id.
1999-04-21 07:42:02 +00:00
obrien
449239f9ad
Add compat3x to the mix.
...
Reviewed by: jkh
1999-04-21 07:22:37 +00:00
obrien
2e28696782
Add compat22 and compat3x.
1999-04-20 11:48:01 +00:00
obrien
1bc9bc495a
Add script to install the compat3x distribution.
1999-04-20 11:42:51 +00:00
obrien
4138845ac5
Add the compat3x dist.
1999-04-20 11:41:59 +00:00
jkh
1e0196bc01
Fix a misspelling.
1999-04-13 05:14:44 +00:00
n_hibma
021eca46c5
Update the list of supported USB devices with the list that is stored in
...
usbdevs.h and usbdevs_data.h. Any additional entries are welcome.
1999-04-11 00:18:07 +00:00
n_hibma
3a8af328c5
Updated the list of devices supported by the USB susystem.
...
Thanks Mike for the hint.
1999-04-10 16:54:12 +00:00
hm
63f97c43fe
Add ISDN cards supported by isdn4bsd to list of supported hardware,
...
remove nic driver for Dr. Neuhaus Niccy 300x ISDN cards from this list
1999-04-10 14:34:29 +00:00
msmith
d8f926e8b9
Add a skinny USB section. Note that the Zip mention preempts the actual
...
comitting of the umass driver by a little.
1999-04-08 21:42:11 +00:00
jkh
bd844dc286
State the need to read errata more, um, strongly.
1999-04-08 06:00:01 +00:00
jkh
8ffac43084
Don't allow upgrade to touch /usr/src; only evil can result from
...
that kind of overlay smashing.
1999-04-07 03:06:44 +00:00
wpaul
0848cf3290
Add driver support for gigabit ethernet adapters based on the Alteon
...
Networks Tigon 1 and Tigon 2 chipsets. There are a _lot_ of OEM'ed
gigabit ethernet adapters out there which use the Alteon chipset so
this driver covers a fair amount of hardware. I know that it works with
the Alteon AceNIC, 3Com 3c985 and Netgear GA620, however it should also
work with the DEC/Compaq EtherWORKS 1000, Silicon Graphics Gigabit
ethernet board, NEC Gigabit Ethernet board and maybe even the IBM and
and Sun boards. The Netgear board is the cheapest (~$350US) but still
yields fairly good performance.
Support is provided for jumbo frames with all adapters (just set the
MTU to something larger than 1500 bytes), as well as hardware multicast
filtering and vlan tagging (in conjunction with the vlan support in
-current, which I should merge into -stable soon). There are some hooks
for checksum offload support, but they're turned off for now since
FreeBSD doesn't have an officially sanctioned way to support checksum
offloading (yet).
I have not added the 'device ti0' entry to GENERIC since the driver
with all the firmware compiled in is quite large, and it doesn't really
fit into the category of generic hardware.
1999-04-06 17:08:31 +00:00
jkh
961da2f703
Add an option for resetting and rescanning the probed device list, perhaps
...
to now detect that CD you just remembered to put in the drive or that
pccard NIC that you've inserted (anybody can put pccardd in an mfsroot image
now you know.. :)
Requested by: Annelise Anderson <andrsn@andrsn.Stanford.EDU>
1999-04-06 08:25:53 +00:00
obrien
bc51f236b7
4.0 will offer EGCS over GCC to the world.
1999-04-04 21:50:07 +00:00
sada
4573e1f503
Make release would fail for lack of /etc/resolv.conf or $DISTFILES/
...
PR: misc/9913
Submitted by: YAMAMOTO Shigeru <shigeru@bremen.or.jp>
1999-03-31 11:18:52 +00:00
jkh
f814848424
Bump default root fs sizes, for both i386 and alpha architectures.
1999-03-30 04:09:21 +00:00
nik
8a4c019b33
If ALLLANG is not set then ensure that DOC_LANG=en is, so that
...
the English Handbook is built (it's not built by default any more).
1999-03-27 16:02:04 +00:00
jkh
84c118e40b
1. Update TAPE to point to new CAM-style device name.
...
2. Don't prompt for removal twice on fixit floppy.
Submitted by: jack <jack@germanium.xtalwind.net>
1999-03-27 01:48:44 +00:00
jkh
d06bd3ef73
Offer an X Kern Developer collection, by user request (it's also more
...
orthogonal to the other entries).
Clean up X selection code a bit.
Choose proper architecture subdirectories on mirror sites now that we've
gone fully to the new multi-arch directory scheme.
1999-03-19 10:54:38 +00:00
jkh
4b69622a7b
Add /etc/rc.firewall to list of "save after upgrade" targets.
1999-03-19 08:22:31 +00:00
jkh
fc153f1c59
This apparently works now, excise it from TROUBLE.TXT
1999-03-18 06:43:01 +00:00
obrien
c31d723601
Add import of ISC's DHCP client & the upgrade of Groff.
1999-03-15 09:41:22 +00:00
markm
aef4a2f1a5
Bitrot. Remove objlink as it is not pleasant to be downwind.
...
PR: 8071
Reviewed by: Sheldon Hearn <sheldonh@iafrica.com>
1999-03-14 20:41:14 +00:00
jkh
87b278912f
Update to post-branch state (yeesh!)
1999-03-12 22:45:42 +00:00
brian
1aaf914a32
Change permissions on /etc/ppp/ppp.conf to 0640.
1999-03-11 18:22:23 +00:00
jkh
798143c96b
Make proper symlinks for fixit mode and ELF binaries.
...
Noticed by: jdp
1999-03-11 09:38:06 +00:00
jkh
9b1ba235bb
Also look under FREEBSD/.. for distribution files; I meant to do this
...
for the DOS distro.
1999-03-10 21:59:01 +00:00
jkh
d8530dac13
We don't use this anymore - nuke it.
1999-03-10 03:50:38 +00:00
jkh
2857c35e80
Merge some doc updates which got only into the 3.0 branch during the last
...
release cycle.
1999-03-10 02:50:32 +00:00
abial
3d281fc46f
Take boot1/boot2 from their new place, i.e. /boot/, not from
...
(currently nonexistent) /usr/mdec/.
Submitted by: luigi
1999-03-09 21:15:08 +00:00
jkh
41f34ba0a5
o Use larger minimum root size on alpha.
...
o Use proper architecture subdir when fetching bits from snapshot servers.
Submitted by: Doug Rabson <dfr@nlsystems.com>
1999-03-09 12:36:28 +00:00
jkh
5c37b0fde4
Add Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules
...
Submitted by: Nick Sayer <nsayer@quack.kfu.com>
PR: 10456
1999-03-08 23:41:12 +00:00
jkh
6c9f56849f
Update reference to setup.exe (which is now dead).
1999-02-23 04:19:30 +00:00
jkh
a2bf462593
Document a changed variable name.
1999-02-18 23:59:58 +00:00
jkh
b0e0d556a3
Be more forgiving of PnP config saving failures.
1999-02-16 01:58:04 +00:00
jkh
714eb80137
Update to deal with pnp userconfig data.
...
Submitted by: abial
1999-02-15 07:07:37 +00:00
jkh
7b9b33664a
Add entry for gnome category.
1999-02-15 04:57:07 +00:00
jkh
e73871aa31
Write out new boot blocks on upgrade.
1999-02-15 02:22:47 +00:00
jkh
98443a91bd
Unbreak the fixit floppy.
...
Clean up some of the media handling to use common routines.
1999-02-15 00:49:33 +00:00
abial
5ecd2a4582
Copy the 'reboot' script only for "dial" floppy.
1999-02-15 00:27:00 +00:00
jkh
7561b0c8db
Put a convenient marker in rc.conf to show updates.
...
Better screen saver descriptions.
1999-02-14 21:35:02 +00:00
jkh
9783bd5729
Fix incorrect initial state for two variables.
1999-02-14 21:26:29 +00:00
jkh
3565782866
MF3: SYSVMSG addition, fluff with release notes.
1999-02-14 20:14:58 +00:00
jkh
3041913b7e
Include all the recent screen savers.
1999-02-14 20:14:07 +00:00
jkh
77bebb0662
Update to match ports reality.
1999-02-14 18:53:17 +00:00
jkh
48def07a8d
4.0-current!
1999-02-14 18:48:44 +00:00
des
5e764fdd0e
Ignore errors from chflags. This makes it possible to make installworld
...
with DESTDIR set to an NFS-mounted file system.
1999-02-14 13:56:15 +00:00