Newer Book-E cores (e500mc, e5500, e6500) do not support the WE bit in the MSR,
and instead delegate CPU idling to the SoC.
Perhaps in the future the QORIQ_DPAA option for the mpc85xx platform will become
a subclass, which will eliminate most of the #ifdef's.
we're assuming hz=1000 and not gracefully handling when it isn't.
The math involved will return 0 for hz < 1000, which it is on some
platforms and on DragonflyBSD.
This doesn't fix it, it:
* converts one manual use over to use the macro, and
* comments where it needs some thought/fixing.
I'll think about this a bit more before fixing it.
Submitted by: imre@vdsz.com
This is a port from openbsd. It's incomplete and unstable, but it's better
than nothing. I have no plans to MFC this until it's complete and stable.
Submitted by: kevlo
If the system was booted with ZFS, a new menu item (#7) appears
It contains an autogenerated list of ZFS Boot Environments
This allows the user to switch to an alternate root file system
Use Cases:
- Revert a failed upgrade
- Concurrently run different versions of FreeBSD with common home directory
- Easier integration with the sysadmin/beadm utility
Requested by: many
Reviewed by: dteske
MFC after: 10 days
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3167
Thinking this through, and looking at process_assignment, I believe
moving the code would be wrong considering that set_conf_files is
called in one condition while set_nextboot_conf is guarded by a
different condition of having nextboot_enable="YES". So these must
stay separated and not combined.
MFC after: 1 week
- Declare some static functions in linux_compat.c instead if inside
various header files.
- Prefix FreeBSD local functions in the LinuxKPI with "linux_" to
avoid symbol name conflicts in the future and to make debugging
easier.
- Make the "struct kobj_ktype" declaractions constant to shave off a
few bytes from the data segment.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
implemented to lower the compiler warnings.
It fix the case of unused-but-set-variable spotted by gcc4.9.
Reviewed by: ngie, ae
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D4720
Keep xform.c as a meta-file including the broken out bits
existing code that includes xform.c continues to work as normal
Individual algorithms can now be reused elsewhere, including outside
of the kernel
Reviewed by: bapt (previous version), gnn, delphij
Approved by: secteam
MFC after: 1 week
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4674
lower vnode. Otherwise, reference to the lower vnode from the upper
one prevents final unlink.
PR: 178238
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
information on what the core supports. In most cases these will be
identical across most CPUs in the SoC, however there may be the case where,
with a big.LITTLE setup they may differ. In this case we print the
decoded data on all CPUs.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4725
the wrapper functions as used in r252511. We can directly use the
locking macros.
Reviewed by: jtl, rwatson
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4731
CPU_ISSET(), CPU_SET etc. in sparc64 asm. This approach has the
benefit of not clobbering %y, allowing to revert r222827 and
partially r222828.
- In r222828, CATR() already was changed to use the equivalent of
PCPU_GET(cpuid) instead of the MD module ID for KTR_CPU, so
belatedly also catch up with the C side of ktr(9). Originally,
in r203838 CATR() was moved away from directly reading the
module ID or equivalent as that became impractical with other
CPU types than USI/II supported. With r222828 in place, per-CPU
data generally is set up soon enough, though, that employing
PCPU things in ktr(9) also for use during early stages works.
- Unfortunately, an exception to the latter is the ktr(9) use
in pmap_bootstrap(), which actually is run so early that even
checking for bootverbose being set via the loader doesn't work.
Consequently, replace the ktr(9) use in pmap_bootstrap() with
OF_printf(9) and put it under #ifdef DIAGNOSTIC instead.
MFC after: 3 days
This includes the following changes:
* SMP kickoff for QorIQ (tested on P5020)
* Errata fixes for some silicon revisions
* Enables L2 (and L3 if available) caches
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
There's no need for it to be in asm. Also, by writing in C, and marking it
static in pmap.c, it saves a branch to the function itself, as it's only used in
one location. The generated asm is virtually identical to the handwritten code.
Fix erroneous error path in error messages when processing boot_conf.
Fixup stack comments for functions introduced by SVN r97201.
Remove a questioning stack comment introduced by SVN r186789.
NB: Comment removed because strdup usage here is correct/not a leak.
MFC after: 1 week
Add two new LWPINFO flags: PL_FLAG_BORN and PL_FLAG_EXITED for reporting
thread creation and destruction. Newly created threads will stop to report
PL_FLAG_BORN before returning to userland and exiting threads will stop to
report PL_FLAG_EXIT before exiting completely. Both of these events are
only enabled and reported if PT_LWP_EVENTS is enabled on a process.
This code is missing the racct_subr() call from kern_thr_exit() and would
require further code duplication in future changes.
Reviewed by: kib
MFC after: 1 week
- Map all 4GB as VA=PA so that args passed in from a bootloader can
be accessed regardless of where they are.
- Figure out the kernel load address by directly masking the PC rather
then by doing pc-relative math on the _start symbol.
- For EARLY_PRINTF support, map device memory as uncacheable (no-op for
ARM_NEW_PMAP because all TEX types resolve to uncacheable).
empty ldvar (which amounts to the varname string starting with '=') into
the if block that manipulates ldvar, which avoids later referencing ldvar
when it was never initialized.
Submitted by: Thomas Skibo
Pointy hat: ian
We'll remove the per-channel control_work_queue because it can't properly
do serialization of message handling, e.g., when there are 2 NIC devices,
vmbus_channel_on_offer() -> hv_queue_work_item() has a race condition:
for an SMP VM, vmbus_channel_process_offer() can run concurrently on
different CPUs and if the second NIC's
vmbus_channel_process_offer() -> hv_vmbus_child_device_register() runs
first, the second NIC's name will be hn0 and the first NIC's name will
be hn1!
We can fix the race condition by removing the per-channel control_work_queue
and run all the message handlers in the global
hv_vmbus_g_connection.work_queue -- we'll do this in the next patch.
With the coming next patch, we have to run the non-blocking handlers
directly in the kernel thread vmbus_msg_swintr(), because the special
handling of sub-channel: when a sub-channel (e.g., of the storvsc driver)
is received and being handled in vmbus_channel_on_offer() running on the
global hv_vmbus_g_connection.work_queue, vmbus_channel_process_offer()
invokes channel->sc_creation_callback, i.e., storvsc_handle_sc_creation,
and the callback will invoke hv_vmbus_channel_open() -> hv_vmbus_post_message
and expect a further reply from the host, but the handling of the further
messag can't be done because the current message's handling hasn't finished
yet; as result, hv_vmbus_channel_open() -> sema_timedwait() will time out
and th device can't work.
Also renamed the handler type from hv_pfn_channel_msg_handler to
vmbus_msg_handler: the 'pfn' and 'channel' in the old name make no sense.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: royger
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4596
Now vmbus_channel_on_offer() -> vmbus_channel_process_offer() can
safely run on the global hv_vmbus_g_connection.work_queue now.
We remove the per-channel control_work_queue to achieve the proper
serialization of the message handling.
I removed the bogus TODO in vmbus_channel_on_offer(): a vmbus offer
can only come from the parent partition, i.e., the host.
PR: kern/205156
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: Howard Su <howard0su gmail com>, delphij
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4597
coalescing and zipping multiple CQEs into a single merged CQE. The
feature is enabled by default and can be disabled by a sysctl.
Implementing this feature mlx5_cqwq_pop() has been separated from
mlx5e_get_cqe().
MFC after: 1 week
Submitted by: Mark Bloch <markb@mellanox.com>
Differential Revision: https://reviews.freebsd.org/D4598
Sponsored by: Mellanox Technologies
