Commit Graph

42 Commits

Author SHA1 Message Date
Kazutaka YOKOTA
8166ba27bd Hack for the "out-of-sync" error.
- Count the number of this error.
- When the error is detected for the first time, the psm driver will
  throw few data bytes (up to entire packet size) and see if it can
  get back to sync.
- If the error still persists, the psm driver disable/enable the mouse
  and see if it works.
- If the error still persists and the count goes up to 20,
  the psm driver reset and reinitialize the mouse. The counter
  is reset to zero.
- It also discards an incomplete data packet when the interval
  between two consequtive bytes are longer than pre-defined timeout
  (2 seconds).  The last byte which arrived late will be regarded as
  the first byte of a new packet.  This is louie's idea.

You may see the following error logs during the above operations:

  "psmintr: delay too long; resetting byte count"
  "psmintr: out of sync (%04x != %04x)"
  "psmintr: discard a byte (%d)"
  "psmintr: re-enable the mouse"
  "psmintr: reset the mouse"

MFC after:	1 month
2001-10-13 10:28:02 +00:00
Takanori Watanabe
c84f2b288e Add PnP ID 'IBM3781' for TP240 mouse. 2001-10-03 07:26:28 +00:00
Kazutaka YOKOTA
d4b248f23e Yet another turn of workaround for psm/ACPI/PnP BIOS
problems currently experienced in -CURRENT.

This should fix the problem that the PS/2 mouse is detected
twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
Kazutaka YOKOTA
cd6cd68d18 Refine ACPI/PnP BIOS probe/attach routines a bit.
- Add workaround for the problematic PnP BIOS which does not assign
  irq resource for the PS/2 mouse device node; if there is no irq
  assigned for the PS/2 mouse node, refer to device.hints for an
  irq number. If we still don't find an irq number in the hints
  database, use a hard-coded value.
- Delete unused ivars.
- Bit of clean up in probe/attach.
- Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Kazutaka YOKOTA
ef92e4471a Update the atkbdc, atkbd, and psm drivers to probe/attach
more cleanly and consistently in all APCI, PnP BIOS, and "hint"
cases.

NOTE: this doesn't necessarily solve the problem that the PS/2
mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Garrett Wollman
0a2c3d48c6 select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
Kazutaka YOKOTA
872dfb2dd3 - Add a hack for "psmintr: out of sync.." This is NOT a fix,
but a hack! Add `flags 0x8000' to the psm driver to enable it.
  The psm driver will try to get out of out-of-sync situation
  by disabling the mouse and immediately enable it again.

If you are seeing this out-of-sync problem because of an
incompetent(?!) KVM switch, this hack will NOT be good
for you.  However, if you are occasionally seeing the
problem because of lost mouse interrupt, this might help.
2000-12-01 05:26:24 +00:00
Kazutaka YOKOTA
ed584487bd - Slightly rearrnage IntelliMouse Explorer and Logitech
MouseMan+ identification routines for efficiency.
  No functional change.
2000-12-01 05:24:30 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Poul-Henning Kamp
f6b5c74c35 Initiate deorbit burn sequence for <machine/mouse.h>.
Replace all in-tree uses with <sys/mouse.h> which repo-copied a few
moments ago from src/sys/i386/include/mouse.h by peter.
This is also the appropriate fix for exo-tree sources.

Put warnings in <machine/mouse.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/mouse.h> files will be removed.
2000-10-09 08:08:36 +00:00
John Baldwin
86ab18a705 Fix several 64-bit-ism warnings due to sizeof(int) != sizeof(void *) on
the alpha.
2000-09-22 08:40:05 +00:00
Kazutaka YOKOTA
01819900ae Add spltty()/splx() in the watchdog timer routine. 2000-08-24 08:49:44 +00:00
Kazutaka YOKOTA
fc581b6bf6 Fix GENERIC_MOUSE_ENTRY.
Submitted by: Graham Wheeler <gram@cequrux.com> and gibbs
2000-07-28 03:48:46 +00:00
Kazutaka YOKOTA
7ce6464adc This is yet another attempt to fix "psmintr out of sync.." problems.
- Properly protect the watchdog timer routine.
- Relocate the sync check statement so that we don't see too many
  error messages.
2000-07-22 04:08:12 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Kazutaka YOKOTA
d0a99324a3 - Add temporary workaround to fool some "clever" KVM switch products
which think they know the IntelliMouse 4-byte packet and believe,
  wrongly, that any other protocols use 3-byte packets.
- Update a couple of comment lines for A4 Tech mice.
2000-04-02 08:28:21 +00:00
Kazutaka YOKOTA
3346e881c1 - Add Support for the following PS/2 mice:
- Microsoft IntelliMouse Explorer: 2 buttons on top, 2 side buttons
    and a wheel which also acts as the middle button.  The mouse is
    recognized as "IntelliMouse Explorer".
  - Genius NetScroll Optical: 2 buttons on top, 2 side buttons and a
    wheel which also acts as the middle button.  The mouse is recognized
    as "NetMouse/NetScroll Optical".
  - MouseSystems SmartScroll Mouse (OEM from Genius?): 3 buttons on top,
    1 side button and a wheel.  The mouse is recognized as Genius
    "NetScroll".
  - IBM ScrollPoint: 2 buttons on top and a stick between the buttons.
    The stick can perform "horizontal scroll" in W*ndows environment.
    The horizontal movement of the stick is detected.  It is currently
    mapped to the Z axis movement in the same way as the first wheel.
    The mouse is recognized as "MouseMan+", as it is considered to be
    a variation of MouseMan.
  - A4 Tech 4D and 4D+ mice. These mice have two wheels! The movement
    of the second wheel is reported as the Z axis movement in the
    same way as the first wheel. These mice are recognized as "4D
    Mouse" and "4D+ Mouse".
  - Tweak IntelliMouse support code a bit so that less-than-compatible
    wheel mice can work properly with the psm driver.
- Add driver configuration flags which correspond to the kernel
  options PSM_HOOKRESUME and PSM_RESETAFTERSUSPEND, so that we don't
  need to recompile the kernel when we need these functions.
- Properly keep track of the irq resource.
- Add a watchdog timer in case interrupts are lost (experimental).
- Add `detach' function (experimental).
2000-03-18 15:21:40 +00:00
Peter Wemm
a6b8513096 Don't free(sc) before returning an error from probe, it does not "belong"
to us, subr_bus.c will free it.  This bug (panic: freeing already free)
was exposed by kern/subr_bus.c rev 1.54

Not explicitly approved by: jkh (but this is a showstopper and fallout of
the above approved change)
2000-03-01 19:30:36 +00:00
Peter Wemm
8f8e587948 Use config's conditional compilation rather than using #ifdefs that make
modular compilation harder.  I'm doing this because people seem to like
cut/pasting examples of bad practices in existing code.
2000-01-29 15:08:56 +00:00
Kazutaka YOKOTA
273157da59 - Add the device resume method. It supercedes the existing resume
routine which hooks the apm driver.
- Rename the PSM_HOOKAPM option to PSM_HOOKRESUME.
- Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
Peter Wemm
1faa5a84a8 Use DEVICE_MODULE() directly instead of DEV_DRIVER_MODULE. psm.c uses
make_dev() already.
1999-11-08 07:29:23 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Kazutaka YOKOTA
7d27f93ac4 Improve the detection code for GlidePoint. This is still a kludge,
but better than before...

PR: kern/13215
1999-08-22 06:11:52 +00:00
Kazutaka YOKOTA
e6d37e188f Recognize Interlink VersaPad. `Tap' action will be recognized
as the button 4.

Submitted by: Masachika ISHIZUKA <ishizuka@ish.org>
1999-08-17 12:14:13 +00:00
Kazutaka YOKOTA
01533d852e Improve Logitech MouseMan+ protocol support. 1999-07-12 15:16:14 +00:00
Kazutaka YOKOTA
551e01b126 Implement a kludge for some wheeled mice for which infamous "psmintr:
out of sync..." messages is generated and the wheel movement is not
recognized.

The trick is found by Takashi Nishida.
1999-07-12 13:40:21 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Kazutaka YOKOTA
2b9e6c7549 Fix PS/2 MouseMan+ protocol. We have been looking at a wrong place
for the sign bit for roller movement!
1999-06-03 12:42:10 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Poul-Henning Kamp
52400704e9 Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Kazutaka YOKOTA
d1a67a9435 Revive APM hooking code for i386 arch now that the same source file is
used for both i386 and alpha (the code was in sys/i386/isa/psm.c, but
was disabled when ported to alpha.)
1999-05-09 04:58:35 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Peter Wemm
25f4337454 Merge revs 1.57 and 1.60 of i386/isa/psm.c 1999-04-18 15:12:11 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Doug Rabson
8a99777019 Update the alpha port to use the new syscons.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> (partly)
1999-01-23 16:53:30 +00:00
Doug Rabson
08b6a4cbee * Add hooks to allow the X server to access I/O ports and memory.
* Update drivers to the latest version of the bus interface.

The ISA drivers' use of the new resource api is minimal.  Garrett has
some much cleaner drivers which should be more easily shared between
i386 and alpha.  This has only been tested on cia based machines.  It
should work on lca and apecs but I might have broken something.
1998-11-15 18:25:17 +00:00
Doug Rabson
66d22cfe03 Port the ps/2 mouse driver to the alpha. 1998-11-08 18:43:03 +00:00