on backing file device and inode numbers.
This is useful for gmountver(8) regression tests.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12230
mark the page as referenced rather than calling vm_page_activate(). This
allows the page's act_count to grow beyond ACT_INIT and better reflect
its usage. (See also r324146, which modified a function used by tmpfs,
uiomove_object_page(), to behave in the same way.)
Reviewed by: kib, markj
MFC after: 2 weeks
attachment code for various SOCs and busses. Remove all the static and
should-have-been-static and named-differently instances of it.
This should eliminate the recently-grown build warnings about multiple
definitions when building arm kernels.
- Added more compatibility strings to drivers not yet converted
- Added new RPI platform code compatibility string to match the ones used
upstream
- Adapted RPI and RPI2 DTS to match the new platform code compatibility
string
The goal is to use the upstream DTBs as a replacement for our custom one.
This is now possible with these changes.
Additionally, as the RPI firmware automatically chooses the right DTB for
us, this would allow to have one common armv6 kernel for RPI0 and RPI1
(BCM2835-based), and one common armv7 kernel for RPI2 v1.1 (BCM2836-based),
and RPI2 v1.2 / RPI3 (BCM2837-based).
Submitted by: Sylvain Garrigues <sylgar@gmail.com>
Differential Revision: https://reviews.freebsd.org/D12360
machine independent parts of the existing code to a new file that can be
shared between amd64 and arm64.
Reviewed by: kib (previous version), imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12434
Use make_dev_s(9) to create device, since the device ioctl interface
needs to access si_drv1 to get softc pointer.
Remove the common but not functional attempt to prevent parallel
accesses by file descriptors by blocking more than one open. Either
threads in one process, or forked siblings, or file descriptors passed
over unix domain sockets all allow to execute parallel requests once
one fd is opened. Since ioctl handler uses smbus_request_bus() to
take the bus ownership, the correct mechanism establishes exclusive
access already.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When enabled by EEPROM, use it to relax translation address/size alignment
requirements for BAR2 window by 128 or 256 times.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
needed, but it silences an erroneous Coverity warning and makes the code a
little more logically consistent. Also mark the sysctl as MPSAFE.
Sponsored by: Netflix
Defining a variable with the description and then only use it in the
SYSCTL declaration led to an unused variable warning. In the SYSCTL the
passed value is discarded using __DESCR.
Use xpt_done_direct in preference to xpt_done when completing a
successful I/O. Continue to use xpt_done when there's an error, or for
completion of the submission of a CCB. This eliminates a context
switch to the cam_doneq thread.
Sponsored by: Netflix
Suggested by: scottl@
parser.
This allows us to use the EROM parser API in cases where the standard bus
space I/O APIs are unsuitable. In particular, this will allow us to parse
the device enumeration table directly from bhndb(4) drivers, prior to
full attach and configuration of the bridge.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12510
Add bhnd(4) API for explicitly registering BHND platform devices (ChipCommon,
PMU, NVRAM, etc) with the bus, rather than walking the newbus hierarchy to
discover platform devices. These devices are now also refcounted; attempting
to deregister an actively used platform device will return EBUSY.
This resolves a lock ordering incompatibility with bwn(4)'s firmware loading
threads; previously it was necessary to acquire Giant to protect newbus access
when locating and querying the NVRAM device.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12392
IPV6_EXs in RSS never mean fragment. They mean:
"- Home address from the home address option in the IPv6 destination
options header. If the extension header is not present, use the
Source IPv6 Address.
- IPv6 address that is contained in the Routing-Header-Type-2 from
the associated extension header. If the extension header is not
present, use the Destination IPv6 Address."
UDP_IPV4_EX is an invalid RSS hash type, which will be removed.
Quoted from:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/rss-hashing-types#ndishashipv6ex
Reviewed by: erj
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12450
UDP checksum offload does not work in Azure if following conditions are
met:
- sizeof(IP hdr + UDP hdr + payload) > 1420.
- IP_DF is not set in IP hdr
Use software checksum for UDP datagrams falling into this category.
Add two tunables to disable UDP/IPv4 and UDP/IPv6 checksum offload, in
case something unexpected happened.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D12429
GPUs: radeonkms, i915kms
NICs: if_em, if_igb, if_bnxt
This metadata isn't used yet, but it will be handy to have later to
implement automatic module loading.
Reviewed by: imp, mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12488
This change allows to just call sdhci_start_slot() in SDHCI drivers
and not to think about which stack handles the operation.
As a side effect, this will also fix MMCCAM with sdhci_acpi driver.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12471
out. Since it can't be paged out, it is never actually enqueued in a
paging queue. Nonetheless, passing PQ_INACTIVE to vm_page_unwire()
creates the appearance that the page "frame" is being enqueued in the
inactive queue. As of r288122, we can avoid this false impression by
passing PQ_NONE.
MFC after: 1 week
1) Choose correct Firmware options for HW LRO for best performance
2) Delete TBD and other comments which are not required.
3) Added sysctl interface to enable / disable / modify different factors
of HW LRO.
4) Disabled HW LRO by default to avoid issues with packet forwarding
This allows much better control over the LRO configuration via sysctls, and
uses much better defaults. Hardware LRO can now be enabled/disabled
independantly from the software LRO, and the tuning parameters are exposed.
manpage updates coming soon.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12223
If the packet is smaller than MTU, disable the TSO flags.
Move TCP header parsing inside the IS_TSO?() test.
Add a new IFLIB_NEED_ZERO_CSUM flag to indicate the checksums need to be zeroed before TX.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12442
- Use HWRM_FUNC_VF_CFG instead of HWRM_FUNC_CFG on VFs
- Fix NPAR/VF detection
- Clean up flag definitions
- Don't allow WoL on VFs
Although the bnxt driver doesn't support SR-IOV so can create VFs yet,
the PF could be running Linux or ESCi with a VF passed through to a
FreeBSD guest. This fixes the driver for that use case.
Submitted by: Siva Kallam <siva.kallam@@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12410
accepts PQ_NONE as the specified queue and returns a Boolean indicating
whether the page's wire count transitioned to zero. Use these features
in dev/drm2.
Reviewed by: kib, markj
MFC after: 1 week
1/4 of the number of queues times queue entries is too limiting. It
works up to about 4k IOPS / 3.0GB/s for hardware that can do
4.4k/3.2GB/s with nvd. 3/4 works better, though it highlights issues
in the fairness of nda's choice of TRIM vs READ. That will be fixed
separately.
In ql_hw_send() return EINVAL when TSO framelength exceeds max
supported length by HW.(davidcs)
2. ql_os.c:
In qla_send() call bus_dmamap_unload before freeing mbuf or
recreating dmmamap.(davidcs)
In qla_fp_taskqueue() Add additional checks for IFF_DRV_RUNNING
Fix qla_clear_tx_buf() call bus_dmamap_sync() before freeing
mbuf.
Submitted by:David.Bachu@netapp.com
MFC after:5 days
