Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this. POSIX does have a requirement on the
application that maxfds not exceed {OPEN_MAX}, but does not require the
implementation to check it ("may fail").
PR: 95239
Apart from the fact that nothing should have OPEN_MAX as a limit (as opposed
to RLIMIT_NOFILE from getrlimit() or _SC_OPEN_MAX from sysconf()), POSIX
does not require us to check this.
PR: 95239
Submitted by: Todd Miller
Append '__' prefix to the tag of struct oflock, and put it under BSD
namespace. Structure is needed both by libc and kernel, thus cannot be
hidden under #ifdef _KERNEL.
Move a set of non-standard F_* and O_* constants into BSD namespace.
SUSv4 explicitely allows implemenation to pollute F_* and O_* names
after fcntl.h is included, but it costs us nothing to adhere
to the specification if exact POSIX compliance level is requested by
user code.
Change some spaces after #define to tabs.
Noted by and discussed with: bde
MFC after: 1 week
This method is more sandbox-friendly and also should be faster as only
one syscall is needed instead of three.
In case of an error fall back to the old method.
Reviewed by: simon, gleb
MFC after: 2 weeks
The function isascii_l() is not in POSIX even though isascii() is,
probably because isascii() is marked as obsolete. The other functions,
like digittoint_l() and ishexnumber_l(), are FreeBSD-specific just like
their non-_l versions.
clock_gettime(2) functions if supported. The speedup seen in
microbenchmarks is in range 4x-7x depending on the hardware.
Only amd64 and i386 architectures are supported. Libc uses rdtsc and
kernel data to calculate current time, if enabled by kernel.
Hopefully, this code is going to migrate into vdso in some future.
Discussed with: bde
Reviewed by: jhb
Tested by: flo
MFC after: 1 month
First, extend the changes in r230782 to better handle the common case
of using NOREUSE with sequential reads. A NOREUSE file descriptor
will now track the last implicit DONTNEED request it made as a result
of a NOREUSE read. If a subsequent NOREUSE read is adjacent to the
previous range, it will apply the DONTNEED request to the entire range
of both the previous read and the current read. The effect is that
each read of a file accessed sequentially will apply the DONTNEED
request to the entire range that has been read. This allows NOREUSE
to properly handle misaligned reads by flushing each buffer to cache
once it has been completely read.
Second, apply the same changes made to read(2) by r230782 and this
change to writes. This provides much better performance in the
sequential write case as it allows writes to still be clustered. It
also provides much better performance for misaligned writes. It does
mean that NOREUSE will be generally ineffective for non-sequential
writes as the current implementation relies on a future NOREUSE
write's implicit DONTNEED request to flush the dirty buffer from the
current write.
MFC after: 2 weeks
string buffer for each linelist l_line into one large string. Since
linelists parsed out during the previous passes store the pointers to
previously allocated l_lines, the reallocation caused undefined
behaviour on accessing the buffers, and quite deterministic fault on
freeing them (in mountd(8) startup).
This fixes reading of netgroup(5) file which contains more then one
netgroup.
Discussed with: ghelmer
MFC after: 3 days
http://austingroupbugs.net/view.php?id=385#c713
(Resolved state) recommend this way for the current standard (called
"earlier" in the text)
"However, earlier versions of this standard did not require this, and the
same example had to be written as:
// buf was obtained by malloc(buflen)
ret = write(fd, buf, buflen);
if (ret < 0) {
int save = errno;
free(buf);
errno = save;
return ret;
}
"
from feedback I have for previous commit it seems that many people prefer
to avoid mass code change needed for current standard compliance
and prefer to track unpublished standard instead, which requires now
that free() itself must save errno, not its usage code.
So, I back out "save errno across free()" part of previous commit,
and will fill PR for changing free() isntead.
2) Remove now unused serrno.
MFC after: 1 week
"The setting of errno after a successful call to a function is
unspecified unless the description of that function specifies that
errno shall not be modified."
However, free() in IEEE Std 1003.1-2008 does not mention its interaction
with errno, so MAY modify it after successful call
(it depends on particular free() implementation, OS-specific, etc.).
So, save errno across free() calls to make code portable and
POSIX-conformant.
2) Remove unused serrno assignment.
MFC after: 1 week
The stat structures returned on pipes seems to contain all the
information required by POSIX. Especially the wording "and thus to a
pipe" makes little sense, because it seems to imply a certain
relationship between sockets and pipes that simply isn't there.
MFC after: 2 weeks
this fflush may fail to write data in the buffer.
PR: kern/137819
Submitted by: Eric Blake <ebb9@byu.net>
Reviewed by: theraven
Approved by: cperciva
MFC after: 2 weeks
function. The purpose of the __eabi() function is to set up the
runtime and is called first thing by main(). The runtime is already
set up for us prior to caling main, so there's nothing to do for
us in the EABI case.
avoid creating bad entries in the grp list as a result of memory allocation
failures while building new entries.
PR: bin/83340
Reviewed by: delphij (prior version of patch)
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
[ENOENT] A component of file_name does not name an existing file or
file_name points to an empty string.
[ENOTDIR] A component of the path prefix is not a directory, or the
file_name argument contains at least one non- <slash> character
and ends with one or more trailing <slash> characters and the last
pathname component names an existing file that is neither a
directory nor a symbolic link to a directory.
Add checks for the listed conditions, and set errno accordingly.
Update the realpath(3) manpage to mention SUS behaviour. Remove the
requirement to include sys/param.h before stdlib.h.
PR: 128933
MFC after: 3 weeks
The typical case was:
static __inline int
convert_ccl(FILE *fp, char * __restrict p, [...])
{
[...]
if (p == SUPPRESS_PTR) {
[...]
} else {
[...]
}
[...]
}
This qualifier says that the pointer is the only one at that time
pointing to the resource.
Here, clang considers that "p" will never match "SUPPRESS_PTR" and
optimize the if{} block out. This leads to segfaults in programs calling
vfscanf(3) and vfwscanf(3) with just the format string (no arguments
following it).
The following softwares were reported to abort with segmentation fault
and this patch fixes it:
o cmake
o smartd
o devel/ORBit2
dim@ opened an LLVM PR to discuss this clang optimization:
http://llvm.org/bugs/show_bug.cgi?id=12656
Tested by: bsam@
conversions. Both the specification and the documentation say the
width is interpreted as the max number of wide characters to read, but
the implementation was interpreting it as the number of bytes to convert.
(See also r105317.)
This change has security implications for any applications that depend
on the buggy behavior, but the impact in practice is probably nil.
Any such application would already be buggy on other platforms that
get the semantics right. Also, these conversions are rarely used;
%ls, %lc, and %l[ are more appropriate.
reading wide characters manually. With this change, they now use
fgetwc(). To make this work, we use an internal version of fgetwc()
with a few extensions: it takes an mbstate * because non-wide streams
don't have a built-in mbstate, and it indicates the number of bytes
read.
vfscanf() now resembles vfwscanf() more closely. Minor functional
improvements include working xlocale support in vfscanf(), setting the
stream error indicator on encoding errors, and proper handling of
shift-based encodings. (Actually, making shift-based encodings work
with non-wide streams is hopeless, but the implementation now matches
the broken specification.)
This tool changes the default buffering behaviour of standard
stdio streams.
It only works on dynamic binaries. To make it work for static
ones it would require cluttering stdio because there no single
entry point.
PR: 166660
Reviewed by: current@, jhb
Approved by: kib (mentor)
MFC after: 1 week
indicates the avaliability of FILE, to prevent possible reordering of
the writes as seen by other CPUs.
Reported by: Fengwei yin <yfw.bsd gmail com>
Reviewed by: jhb
MFC after: 1 week
by separate conversion functions. This will hopefully make bugs more
noticeable (I noticed several already) and provide opportunities to
reduce code duplication.
prior to 3.0.0 release). This fixes several bugs related to memory
initialization.
Mangle __jemalloc_a0{malloc,calloc,free}() just like all the other
library-internal symbols in jemalloc, and adjust the tls allocation code
in libc to use the mangled names.
(i.e., the return value would overflow), set errno to EOVERFLOW
and return an error. This improves the chances that buggy
applications -- for instance, ones that pass in a negative integer
as the size due to a bogus calculation -- will fail in safe ways.
Returning an error in these situations is specified by POSIX, but
POSIX appears to have an off-by-one error that isn't duplicated in
this change.
Previously, some of these functions would silently cap the size at
INT_MAX+1, and others would exit with an error after writing more
than INT_MAX characters.
PR: 39256
MFC after: 2 weeks
true if the size is zero.
- Fix a claim that sprintf() is the same as snprintf() with an
infinite size. It's equivalent to snprintf() with a size of
INT_MAX + 1.
- Document the return values in the return values section.
- Document the possible errno value of EOVERFLOW.
MFC after: 2 weeks
infinite loop pretty much unconditionally. It's remarkable that the
patch that introduced the bug was never tested, but even more
remarkable that nobody noticed for over two years.
PR: 167039
MFC after: 3 days
prior to 3.0.0 release) as contrib/jemalloc, and integrate it into libc.
The code being imported by this commit diverged from
lib/libc/stdlib/malloc.c in March 2010, which means that a portion of
the jemalloc 1.0.0 ChangeLog entries are relevant, as are the entries
for all subsequent releases.
outside the range of valid file descriptors
PR: kern/164970
Submitted by: Peter Jeremy <peterjeremy@acm.org>
Reviewed by: jilles
Approved by: cperciva
MFC after: 1 week
usermode context switches (long jumps and ucontext operations). If these
are used across threads, multiple threads can end up with the same TLS base.
Madness will then result.
This makes behavior on PPC match that on x86 systems and on Linux.
MFC after: 10 days
privilege attempts to toggle SF_SETTABLE flags.
- Use the '^' operator in the SF_SNAPSHOT anti-toggling check.
Flags are now stored to ip->i_flags in one place after all checks.
Submitted by: bde
is already open in this process.
If the named semaphore is already open, sem_open() only increments a
reference count and did not take the flags into account (which otherwise
happens by passing them to open()). Add an extra check for O_CREAT|O_EXCL.
PR: kern/166706
Reviewed by: davidxu
MFC after: 10 days
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
application destroys semaphore after sem_wait returns. Just enter
kernel to wake up sleeping threads, only update _has_waiters if
it is safe. While here, check if the value exceed SEM_VALUE_MAX and
return EOVERFLOW if this is true.
Because the utmpx interface is generally not required to be thread-safe,
but it is nice to have, if easy to do so. Therefore don't make a mess
out of the code and only use it if __NO_TLS is not defined.
no waiters, we still increase and decrease count in user mode without
entering kernel, once there is a waiter, sem_post will enter kernel to
increase count and wake thread up, this is atomicy and allow us to
gracefully destroy semaphore after sem_wait returned.
pathnames.
With the current API (no *at functions), FTS_NOCHDIR requires that the
fts_accpath start with the original path passed to fts_open(); therefore,
the depth that can be reached is limited by the {PATH_MAX} constraint on
this pathname.
MFC after: 1 week
