1) Allow the sending of more than one control message at a time
over a unix domain socket. This should cover the PR 29499.
2) This requires that unp_{ex,in}ternalize and unp_scan understand
mbufs with more than one control message at a time.
3) Internalize and externalize used to work on the mbuf in-place.
This made life quite complicated and the code for sizeof(int) <
sizeof(file *) could end up doing the wrong thing. The patch always
create a new mbuf/cluster now. This resulted in the change of the
prototype for the domain externalise function.
4) You can now send SCM_TIMESTAMP messages.
5) Always use CMSG_DATA(cm) to determine the start where the data
in unp_{ex,in}ternalize. It was using ((struct cmsghdr *)cm + 1)
in some places, which gives the wrong alignment on the alpha.
(NetBSD made this fix some time ago).
This results in an ABI change for discriptor passing and creds
passing on the alpha. (Probably on the IA64 and Spare ports too).
6) Fix userland programs to use CMSG_* macros too.
7) Be more careful about freeing mbufs containing (file *)s.
This is made possible by the prototype change of externalise.
PR: 29499
MFC after: 6 weeks
to strdup() the address string before returning it via *targaddr
because the caller will free the string.
Change the comment at the top of getclnthandle() to clarify that
the caller is responsible for freeing *targaddr.
Noticed by: sobomax
whether or not connect(2) is used for UDP client sockets. The default
is not to connect(), so existing clients will see no change in
behaviour.
The use of connect(2) for UDP clients has a number of advantages:
only replies from the intended address are received, and ICMP errors
pertaining to the connection are reported back to the application.
data pointer. This bug has been here since the ti-rpc import; it
apparently broke the clnt_control CLGET_SVC_ADDR options.
PR: misc/27813
Submitted by: Jean-Luc Richier <Jean-Luc.Richier@imag.fr>
accidentally clobber the server address if a stray packet arrived
at the client port. This would result in any further retransmits
going to the wrong address.
For now, fix this by not saving the source address of the reply; this
matches the pre-tirpc behaviour.
terminates the string in all cases, based on code from netstat(1).
The path in a sockaddr_un is terminated either by a '\0', or by
the end of the sockaddr as defined by sun_len.
Previously, the code could write the "safety" '\0' beyond the end
of the sockaddr (sockaddr_un's need only be large enough to store
sun_len bytes), and writing into the the supplied sockaddr is bad
anyway.
address" string to a netbuf/sockaddr "transport address". In the
case of an AF_LOCAL address, it was missing the code to actually
point the netbuf at the newly allocated sockaddr_un, so the caller
ended up with a netbuf containing junk.
Submitted by: Martin Blapp <mb@imp.ch>
than the default buffer size in the old RPC code (8800 bytes), and
it could not be overriden by the application. This caused problems
with CFS (/usr/port/security/cfs).
Change this default back to UDPMSGSIZE (8800 bytes), but more
importantly, allow applications to use larger message sizes for
all protocols if desired. Choose an arbitrary maximum message size
of 256k instead of using the default as the maximum (which is
silly).
Reported by: ache
Reviewed by: alfred, Martin Blapp <mb@imp.ch>
`nc_error' variables. Move the nc_lock mutex from mt_misc.c to a
static variable within this function, since it is only used here.
Add a new getnetconfigent() error code `NC_NOTFOUND' to report the
case where the specified netid was not found. Set nc_error in all
error cases in getnetconfigent() so that the error messages returned
by nc_(s)perror are always meaningful.
Add a terminating \n to the output of nc_perror() to match both
our manpage and other implementations of this function.
Reviewed by: deischen, alfred, Martin Blapp <mb@imp.ch>
RPC clients hanging. The real problem turned out to be missing
cleanup code; this was fixed in clnt_vc.c r1.5 and clnt_dg.c r1.4.
Submitted by: Martin Blapp <mb@imp.ch>
so that the underscored versions of the pthread functions get
declared. This removes around 300 lines of 'implicit declaration
of XXX' warnings from the output of a libc build with -Wall.
Reviewed by: Martin Blapp <mb@imp.ch>, alfred
to make asynchronous RPCs. This is needed to help fix ypbind, which can no
longer override the clnt_dg_call() method (formerly the clntudp_call()
method) due to all the internal descriptor locking code in TI-RPC. Turning
on this flag allows us to send an RPC request, then return immediately,
and handle a reply later, rather than being forced to do the request
and reply in a single function call.
Also fix a byte ordering bug: when clnt_dg_call() increments the XID
prior to transmitting a request, it uses the raw value, which is wrong.
The XID is stored in network byte order, i.e. big-endian. The CLSET_XID
and CLGET_XID commands in clnt_dg_control() use ntohl()/htonl() to get
the byte ordering right, but because clnt_dg_call() does not do this,
using CLSET_XID/CLGET_XID doesn't actually work, unless you're on a
big endian host, which we aren't (yet). Fix clnt_dg_call() to byte swap
properly when doing the increment.
Make struct cmessage visible from socket.h (about 4 places were
defining it for themselves which wasn't good)
Make __rpc_get_local_uid() useable and give it prototype that's
visible.
Fix some issues with printing out usernames from rpcbind and keyserv.
should have been repo-copied from it in the first place.
Apply all of our fixes up to and including revision 1.14 to
the original rpc.3 manpage, including conversion to mdoc(7).
associated changes that had to happen to make this possible as well as
bugs fixed along the way.
Bring in required TLI library routines to support this.
Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.
This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).
The submitter has agreed to continue on and bring us up to the
1999 release.
Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.
Many userland updates were done to bring the code up to par with
the recent RPC API.
There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.
While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.
New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.
Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.
Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.
Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul
Reviewed by: David Cross <dec@freebsd.org>, jkh <jkh@freebsd.org>
Approved by: jkh <jkh@freebsd.org>
Obtained from: Ian Dowse <iedowse@maths.tcd.ie>, David Cross <dec@freebsd.org>
We have been running this patch on a production NIS server for 2.5 weeks now.
Normally we would have ypserv die at least once a week, and often many times
a day.
This patch treats and error from select as zeroing out the FD_SET to indicate
that no fds are ready for reading. This is safe because the rpc code
always re-inits the FDSET before calling select.
adding (weak definitions to) stubs for some of the pthread
functions. If the threads library is linked in, the real
pthread functions will pulled in.
Use the following convention for system calls wrapped by the
threads library:
__sys_foo - actual system call
_foo - weak definition to __sys_foo
foo - weak definition to __sys_foo
Change all libc uses of system calls wrapped by the threads
library from foo to _foo. In order to define the prototypes
for _foo(), we introduce namespace.h and un-namespace.h
(suggested by bde). All files that need to reference these
system calls, should include namespace.h before any standard
includes, then include un-namespace.h after the standard
includes and before any local includes. <db.h> is an exception
and shouldn't be included in between namespace.h and
un-namespace.h namespace.h will define foo to _foo, and
un-namespace.h will undefine foo.
Try to eliminate some of the recursive calls to MT-safe
functions in libc/stdio in preparation for adding a mutex
to FILE. We have recursive mutexes, but would like to avoid
using them if possible.
Remove uneeded includes of <errno.h> from a few files.
Add $FreeBSD$ to a few files in order to pass commitprep.
Approved by: -arch
