Call the handler function with the lock held, return unlocked as we
might free the entry. Rework functions later in the call graph to be
either called with the lock held or, only if needed, unlocked.
Place asserts to document and tighten assumptions on various lle locking,
which were not always true before.
We call nd6_ns_output() unlocked and the assignment of ip6->ip6_src was
decentralized to minimize possible complexity introduced with the formerly
missing locking there. This also resulted in a push down of local
variable scopes into smaller blocks.
Reported by: many
PR: kern/148857
Submitted by: Dmitrij Tejblum (tejblum yandex-team.ru) (original version)
MFC After: 4 days
We do not respect rules 3 and 4 in the required list:
1. omit leading zeros
2. "::" used to their maximum extent whenever possible
3. "::" used where shortens address the most
4. "::" used in the former part in case of a tie breaker
5. do not shorten one 16 bit 0 field
6. use lower case
http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-04.html
Submitted by: Kalluru Abhiram @ Juniper Networks
Obtained from: Juniper Networks
Reviewed by: hrs, dougb
prevented the link-layer entry from being freed.
In both in.c and in6.c (though that code path seems to be basically dead)
plug a reference leak in case of a pending callout being drained.
In if_ether.c consistently add a reference before resetting the callout
and in case we canceled a pending one remove the reference for that.
In the final case in arptimer, before freeing the expired entry, remove
the reference again and explicitly call callout_stop() to clear the active
flag.
In nd6.c:nd6_free() we are only ever called from the callout function and
thus need to remove the reference there as well before calling into
llentry_free().
In if_llatbl.c when freeing entire tables make sure that in case we cancel
a pending callout to remove the reference as well.
Reviewed by: qingli (earlier version)
MFC after: 10 days
Problem observed, patch tested by: simon on ipv6gw.f.o,
Christian Kratzer (ck cksoft.de),
Evgenii Davidov (dado korolev-net.ru)
PR: kern/144564
Configurations still affected: with options FLOWTABLE
IFF_POINTOPOINT link types. The reason was due to the routing
entry returned from the kernel covering the remote end is of an
interface type that does not support ARP. This patch fixes this
problem by providing a hint to the kernel routing code, which
indicates the prefix route instead of the PPP host route should
be returned to the caller. Since a host route to the local end
point is also added into the routing table, and there could be
multiple such instantiations due to multiple PPP links can be
created with the same local end IP address, this patch also fixes
the loopback route installation failure problem observed prior to
this patch. The reference count of loopback route to local end would
be either incremented or decremented. The first instantiation would
create the entry and the last removal would delete the route entry.
MFC after: 5 days
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.
Reviewed by: bz
MFC after: immediately
automatic link-local address configuration:
- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.
- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.
- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.
- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.
- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".
Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days
- Interface link-local address is not reachable within the
node that owns the interface, this is due to the mismatch
in address scope as the result of the installed interface
address loopback route. Therefore for each interface
address loopback route, the rt_gateway field (of AF_LINK
type) will be used to track which interface a given
address belongs to. This will aid the address source to
use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
only for validation reason. Doing so will eliminate as much
of the special case (loopback addresses) handling code
as possible, however, these empty nd6 entries should not
be returned to the userland applications such as the
"ndp" command.
Since both of the above issues contain common files, these
files are committed together.
Reviewed by: bz
MFC after: immediately
list/index locks, to protect link layer address tables. This avoids
lock order issues during interface teardown, but maintains the bug that
sysctl copy routines may be called while a non-sleepable lock is held.
Reviewed by: bz, kmacy
MFC after: 3 days
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
address is configured with a /128 prefix. This is no longer necessary due
to r192011. In fact that code conflicts with r192011. This patch removes
the host route installation when detecting the /128 prefix, and instead
let the code added by r192011 to install the loopback route for that IPv6
interface address.
Reviewed by: bz
Approved by: re
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
- Allow loopback route to be installed for address assigned to
interface of IFF_POINTOPOINT type.
- Install loopback route for an IPv4 interface addreess when the
"useloopback" sysctl variable is enabled. Similarly, install
loopback route for an IPv6 interface address when the sysctl variable
"nd6_useloopback" is enabled. Deleting loopback routes for interface
addresses is unconditional in case these sysctl variables were
disabled after an interface address has been assigned.
Reviewed by: bz
Approved by: re
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
to a non loopback/ppp link type) through the loopback interface. Prior
to the new L2/L3 rewrite, this host route was explicitly created when
processing the IPv6 address assignment. This loopback host route is
deleted when that IPv6 address is removed from the interface.
Reviewed by: bz, gnn
Approved by: re
in one additional case, avoiding an ifaddr reference leak.
Defer releasing the in6_ifaddr's in6_ifaddrhead reference until the
end of in6_unlink_ifa(), as callers are inconsistent regarding whether
or not they hold a reference across the call. This avoids using the
ifaddr after it may have been freed.
Reported by: tegge
Reviewed by: tegge
Approved by: re (blanket)
MFC after: 6 weeks
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.
Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.
Reviewed by: bz
MFC after: 6 weeks
in particular, add a reference for in6_ifaddrhead since we do remove a
reference for it when an IPv6 address is removed. This fixes ifconfig
delete of an IPv6 alias.
Reported by: tegge
MFC after: 6 weeks
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead). Adopt
the code styles and conventions present in netinet where possible.
Reviewed by: gnn, bz
MFC after: 6 weeks (possibly not MFCable?)
rather than pointers, requiring callers to properly dispose of those
references. The following routines now return references:
ifaddr_byindex
ifa_ifwithaddr
ifa_ifwithbroadaddr
ifa_ifwithdstaddr
ifa_ifwithnet
ifaof_ifpforaddr
ifa_ifwithroute
ifa_ifwithroute_fib
rt_getifa
rt_getifa_fib
IFP_TO_IA
ip_rtaddr
in6_ifawithifp
in6ifa_ifpforlinklocal
in6ifa_ifpwithaddr
in6_ifadd
carp_iamatch6
ip6_getdstifaddr
Remove unused macro which didn't have required referencing:
IFP_TO_IA6
This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc). In a few cases, add missing if_addr_list locking
required to safely acquire references.
Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit. Once
we have mbuf tag deep copy support, this can be fixed.
Reviewed by: bz
Obtained from: Apple, Inc. (portions)
MFC after: 6 weeks (portions)
- Unify reference count and lock initialization in a single function,
ifa_init().
- Move tear-down from a macro (IFAFREE) to a function ifa_free().
- Move reference count bump from a macro (IFAREF) to a function ifa_ref().
- Instead of using a u_int protected by a mutex to refcount(9) for
reference count management.
The ifa_mtx is now used for exactly one ioctl, and possibly should be
removed.
MFC after: 3 weeks
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
by creating a child jail, which is visible to that jail and to any
parent jails. Child jails may be restricted more than their parents,
but never less. Jail names reflect this hierarchy, being MIB-style
dot-separated strings.
Every thread now points to a jail, the default being prison0, which
contains information about the physical system. Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().
Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings. The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.
Approved by: bz (mentor)
route is also being deleted, the link-layer address table
(arp or nd6) will flush those L2 llinfo entries that match
the removed prefix.
Reviewed by: kmacy
-- A routing socket message is not generated when an IPv6 address is
either inserted or deleted from an interface. The missing routing
message problem was discovered by Randall Stewart and Michael Tuxen
during SCTP testing.
-- Previously when an IPv6 address is configured on an interface, if the
prefix length is /128, then a host route is instaleld in the kernel
for this address. But this host route is not deleted when that IPv6
address is removed from the interface.
-- Routes to the link-local all-nodes multicast address and the
interface-local all-nodes multicast address are not removed when
the last IPv6 address is removed from an interface.
Reviewed by: bz, gnn
import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
in FreeBSD 5.x to allow network device drivers to run with Giant
despite the network stack being Giant-free. This significantly
simplifies calls into ioctl() on network interfaces, especially
in the multicast code, as well as eliminates deferred invocation
of interface if_start routines.
Disable the build on device drivers still depending on
IFF_NEEDSGIANT as they no longer compile. They will be removed
in a few weeks if they haven't been made MPSAFE in that time.
Disabled drivers:
if_ar
if_axe
if_aue
if_cdce
if_cue
if_kue
if_ray
if_rue
if_rum
if_sr
if_udav
if_ural
if_zyd
Drivers that were already disabled because of tty changes:
if_ppp
if_sl
Discussed on: arch@
net/route.h.
Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.
We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.
This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
return zero on success and an error code otherwise. The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family. For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.
Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes). Remove the explicit
jailed() checks that preceded many of the function calls.
Approved by: bz (mentor)
a locked route. Thus we have to use RTFREE_LOCKED(9) to get it unlocked
and rtfree(9)d rather than just rtfree(9)d.
Since the PR was filed, new places with the same problem were added
with new code. Also check that the rt is valid before freeing it
either way there.
PR: kern/129793
Submitted by: Dheeraj Reddy <dheeraj@ece.gatech.edu>
MFC after: 2 weeks
Committed from: Bugathon #6
by the new kernel option COMPAT_ROUTE_FLAGS for binary backward
compatibility. The RTF_LLDATA flag maps to the same value as RTF_LLINFO.
RTF_LLDATA is used by the arp and ndp utilities. The RTF_LLDATA flag is
always returned to the userland regardless whether the COMPAT_ROUTE_FLAGS
is defined.
read with libkvm) to the addresses of a prison, when inside a
jail. [1]
As the patch from the PR was pre-'new-arp', add checks to the
llt_dump handlers as well.
While touching RTM_GET in route_output(), consistently use
curthread credentials rather than the creds from the socket
there. [2]
PR: kern/68189
Submitted by: Mark Delany <sxcg2-fuwxj@qmda.emu.st> [1]
Discussed with: rwatson [2]
Reviewed by: rwatson
MFC after: 4 weeks
jail-aware. Up to now we returned the first address of the interface
for SIOCGIFADDR w/o an ifr_addr in the query. This caused problems for
programs querying for an address but running inside a jail, as the
address returned usually did not belong to the jail.
Like for v6, if there was an ifr_addr given on v4, you could probe
for more addresses on the interfaces that you were not allowed to see
from inside a jail. Return an error (EADDRNOTAVAIL) in that case
now unless the address is on the given interface and valid for the
jail.
PR: kern/114325
Reviewed by: rwatson
MFC after: 4 weeks
to ip_output(). The destionation is represented in a sockaddr{} object
that may contain other pieces of information, e.g., port number. This
same destination sockaddr{} object may be passed into L2 code, which
could be used to create a L2 entry. Since there exists a L2 table per
address family, the L2 lookup function can make address family specific
comparison instead of the generic bcmp() operation over the entire
sockaddr{} structure.
Note in the IPv6 case the sin6_scope_id is not compared because the
address is currently stored in the embedded form inside the kernel.
The in6_lltable_lookup() has to account for the scope-id if this
storage format were to change in the future.
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
