Commit Graph

57 Commits

Author SHA1 Message Date
Warner Losh
d1458cfdf4 MFp4: First batch of dev/usb/usbdevs.h -> usbdevs.h changes. 2004-06-27 12:41:44 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Maxime Henrion
866a788cc2 We don't need to initialize if_output, ether_ifattach() does it
for us.
2004-05-23 16:11:53 +00:00
Ian Dowse
eadf519a78 Replace the static "qdat" structure with a per-instance softc field
in all USB ethernet drivers. The qdat structure contains a pointer
to the interface's struct ifnet and is used to process incoming
packets, so simultaneous use of two similar devices caused crashes
and confusion.

The if_udav driver appeared in the tree since Daan's PR, so I made
similar changes to that driver too.

PR:		kern/59290
Submitted by:	Daan Vreeken <Danovitsch@Vitsch.net>
2004-05-23 12:35:25 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Johan Karlsson
33a3109794 Remove duplicate
#include <sys/cdefs.h>
__FBSDID(...);

Leave the one matching the other files in this directory.
2003-11-14 11:09:45 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Josef Karthauser
cd719b55bd Make it easier to run this code on RELENG_4.
Submitted by:	luoqi
2003-10-04 21:41:01 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
John-Mark Gurney
fb393615ed add missing machine/bus.h headers that are now necessary because of the
bus_dma addition.
2003-07-16 02:20:14 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Murray Stokely
65793abdff Add ID for Kawasaki LSI Inc. USB-Ethernet, rev 1.00/2.02 adapter.
PR:		kern/50064
Submitted by:	Scott Renfro <scott@renfro.org>
MFC after:	3 days
2003-04-07 10:26:59 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Ian Dowse
417d8f25fc Re-fetch the interface handle after setting the config number,
because the previous interface handle gets freed when the config
number is set. This fixes a problem where memory could be accessed
after it was freed when the interface was ifconfig'd up.

Reviewed by:	n_hibma
2002-07-15 14:37:36 +00:00
Josef Karthauser
906e5d2c1b We not long need to use USBD_NO_TSLEEP. 2002-04-07 12:19:50 +00:00
Josef Karthauser
3847d1fda8 MFNetBSD: if_aue.c (1.26), if_auereg.h (1.6), if_cue.c (1.10),
if_cuereg.h (1.5), if_kue.c (1.11), if_kuereg.h (1.5)

    date: 2000/03/02 12:37:51;  author: augustss;
    Use ratecheck() to limit error messages on disconnect.
    Break out some common functionality.
2002-04-07 12:04:02 +00:00
Josef Karthauser
6a69a08a22 Use the UE_GET_XFERTYPE macro. 2002-04-06 21:28:57 +00:00
Josef Karthauser
47c61eef1b Rename foo_gone to foo_dying, in keeping with the rest of the usb code. 2002-04-06 20:17:13 +00:00
Josef Karthauser
3d9e00aa02 Replace device_t with device_ptr_t. 2002-04-06 19:55:52 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Josef Karthauser
c8d05bc5f5 Use ANSI prototypes and declarations. 2002-04-02 11:54:28 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Peter Wemm
1408f3e993 Make these depend on the usb module so they can use its symbols if they
are loaded as seperate .ko files
2001-08-22 05:33:57 +00:00
Nick Hibma
6e4a2c5638 Add the Abocom URE 450 ethernet adapter.
Submitted by:   dima@bog.msu.su
2001-04-09 18:44:11 +00:00
Nick Hibma
b9688f84b0 Add id for the IO Data ET/T
PR:		23877
Submitted by:	Makoto MATSUSHITA <matusita@jp.freebsd.org>
2001-04-07 20:47:29 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Poul-Henning Kamp
78d82c8c59 Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead of
<sys/queue.h> implementation details.

Created with:   /usr/sbin/sed
Reviewed with:  /sbin/md5
2001-02-03 16:29:10 +00:00
Bosko Milekic
08812b3925 Implement MTX_RECURSE flag for mtx_init().
All calls to mtx_init() for mutexes that recurse must now include
the MTX_RECURSE bit in the flag argument variable. This change is in
preparation for an upcoming (further) mutex API cleanup.
The witness code will call panic() if a lock is found to recurse but
the MTX_RECURSE bit was not set during the lock's initialization.

The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to
MTX_RECURSED, which is more appropriate given its meaning.

The following locks have been made "recursive," thus far:
eventhandler, Giant, callout, sched_lock, possibly some others declared
in the architecture-specific code, all of the network card driver locks
in pci/, as well as some other locks in dev/ stuff that I've found to
be recursive.

Reviewed by: jhb
2001-01-19 01:59:14 +00:00
Bill Paul
0b32bab160 Add a forgotten mutex_exit()/KUE_UNLOCK() to kue_init(). 2000-11-23 05:58:48 +00:00
Bill Paul
f709eddf9f Convert the USB ethernet drivers to use mutexes. Also convert
usb_ethersubr.c. This module maintains two queues for packets which
are each protected with one mutex. These are all the changes I can
do for now. Removing the USBD_NO_TSLEEP flag doesn't work yet: when
I tried it, the system would usually freeze up after a NIC had been
operating for a while. The usb_ethersubr module itself ought to
go away; this is the next thing I need to test.
2000-10-24 22:38:54 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Bill Paul
a2693d6d71 Handle watchdog timeouts better. We can't really call the foo_init()
routines from foo_watchdog() because foo_watchdog() is called at
interrupt context, and that's a no-no due to the way the USB stack
is currently set up.

What we do now is call the TX end of frame handler manually to clear
the completed transmission, then check the send queue and send off
any frames that are pending.

Also turned off the interrupt pipe stuff in if_aue, since it appears
to tickle a bug in the USB stack that I haven't found yet.
2000-06-01 23:16:42 +00:00
Nick Hibma
cdb51d12a6 OpenBSD has a broken debugger that does not grok static. Use a
#define Static  static

that the OpenBSD folks can define it to be empty if they like.
2000-04-03 20:58:30 +00:00
Bill Paul
554d5470ef Add vendor/product ID for two more KLSI-based devices, including a
USB ethernet adapter being handed out by @Home.
2000-03-29 19:44:48 +00:00
Bill Paul
b485fb175f Regenerate usbdevs files.
Also add device entry in if_kue.c for the LINKSYS USB10T adapter.

Also add calls to bpfdetach() in detach routines.
2000-03-21 15:20:41 +00:00
Bill Paul
726fcd3955 Add another device/vendor code combination to support yet another
KLSI-based device (Skymaster DHU-0404).
2000-03-18 01:36:37 +00:00
Bill Paul
a6d9a40e81 More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
  following improvements:
        o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
          quirk. This allows drivers to specify busy waiting only for
          certain transfers (namely control transfers for reading/writing
          registers and stuff).
        o New USBD_FORCE_SHORT_XFER flag can be used to deal with
          devices like the ADMtek Pegasus that sense the end of bulk OUT
          transfers in a special way (if a transfer is exactly a multiple
          of 64 bytes in size, you need to send an extra empty packet
          to terminate the transfer).
        o usbd_open_pipe_intr() now accepts an interval argument which
          can be used to change the rate at which the interrupt callback
          routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
          value specified in the device's config data, but drivers can
          override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
  control transfers. We no longer force the non-tsleep hack for
  bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
  need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
  usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
  when a device has been detached, and use this flag to perform
  tests to prevent the drivers from trying to do control transfers
  if this is the case. This is necessary because calling if_detach()
  with INET6 enabled will eventually result in a call to the driver's
  ioctl() routine to delete the multicast groups on the interface,
  which will result in attempts to perform control transfers. (It's
  possible this also happens even without INET6 support enabled.) This
  is pointless since we know that if the detach method has been called,
  the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
  to initialize the device states without trying to close and re-open the
  pipes. This is partly because we don't want to frob things at interrupt
  context, but also because this doesn't seem to work right and I don't
  want to panic the system just because a USB device may have stopped
  responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
  transfer is needed. Unfortunately, the design of the chip makes it hard
  to get this exactly right. Hopefully, this will go away once either
  Nick or Lennart finds the bug in the uhci driver that makes this ugly
  hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Bill Paul
7b7b87d7ef Change the mechanism by which we detect that the firmware is already
running. It turns out that trying to read the MAC address when there's
no firmware creates a zero length transfer. This apparently doesn't
hurt anything on a UHCI controller, but OHCI controllers generate an
IOERROR, and the device doesn't initialize.

Instead, check the bcdDevice revision code. We know this will be
different when the firmware is running, so if we detect the firmware's
code instead of the bare hardware's code, we skip the firmware load.
2000-01-17 23:14:40 +00:00
Bill Paul
20a08a85e4 Remove device name strings from vendor/product lists since we don't use
them (they're read from the device directly). Also do a set_config
command for the ADMtek and CATC drivers.
2000-01-16 22:45:07 +00:00
Bill Paul
4c645f4852 Pull my head out of my ass and actually make the tx netisr stuff work right.
Do not not not call m_freem() in the txeof routines. Let the netisr routine
do it. This also makes the tx netisr queuing much simpler (I can just use
another ifqueue instead of the mess I had before.)

Thanks to Bosko Milekic for making me actually think about what I was
doing for a minute.
2000-01-14 01:36:16 +00:00
Bill Paul
f1a80ccf63 Clean up rxeof routines a little. 2000-01-14 00:49:28 +00:00
Bill Paul
4f0a6f0403 Bunch of updates:
- Add vendor/device ID for Corega USB-T ethernet adapter to necessary
  places so that it will work with the kue driver.

- Add vendor/device ID for CATC Netmate devices for driver to be added
  soon.

- Get really crazy about netisr stuff: avoid doing any mbuf allocations
  or deallocations at splbio/splusb.

- Fix if_aue driver so that it works with LinkSys USB100TX: you need
  to flip the GPIO bits just the right way to put the PHY in the right
  mode.
2000-01-13 20:13:58 +00:00
Bill Paul
502c509ce0 Apply the same netisr mechanism to transmissions as well. In order to
drive the transmitter, we have to check the interface's send queue in the
TX end of frame handler (i.e. the usb bulk out callback) and push out new
transmissions if the queue has packets in it and the transmitter is
ready. But the txeof handler is also called from a USB callback running
at splusb() too.

Grrr.
2000-01-12 17:46:40 +00:00
Bill Paul
611d6a1573 Straighten out the logic in kue_setmulti() a little (the case where we
have no multicast entries to add is not handled right).
2000-01-11 18:09:19 +00:00
Bill Paul
a0067d7b89 Attempt to fix a problem with receiving packets on USB ethernet interfaces.
Packets are received inside USB bulk transfer callbacks, which run at
splusb() (actually splbio()). The packet input queues are meant to be
manipulated at splimp(). However the locking apparently breaks down under
certain circumstances and the input queues can get trampled.

There's a similar problem with if_ppp, which is driven by hardware/tty
interrupts from the serial driver, but which must also manipulate the
packet input queues at splimp(). The fix there is to use a netisr, and
that's the fix I used here. (I can hear you groaning back there. Hush up.)

The usb_ethersubr module maintains a single queue of its own. When a
packet is received in the USB callback routine, it's placed on this
queue with usb_ether_input(). This routine also schedules a soft net
interrupt with schednetisr(). The ISR routine then runs later, at
splnet, outside of the USB callback/interrupt context, and passes the
packet to ether_input(), hopefully in a safe manner.

The reason this is implemented as a separate module is that there are
a limited number of NETISRs that we can use, and snarfing one up for
each driver that needs it is wasteful (there will be three once I get
the CATC driver done). It also reduces code duplication to a certain
small extent. Unfortunately, it also needs to be linked in with the
usb.ko module in order for the USB ethernet drivers to share it.

Also removed some uneeded includes from if_aue.c and if_kue.c

Fix suggested by: peter
Not rejected as a hairbrained idea by: n_hibma
2000-01-10 23:12:54 +00:00
Bill Paul
5edf2bc0a5 Leave the SOFS value (number of StartOfFrames to wait while filling
an URB before sending ZLP) set to the default. Choosing a bad value
can apparently cause a lockup on some machines/controllers.

Reported by: Doug Ambrisko
2000-01-08 00:40:44 +00:00