This turns on support for kernel dump encryption and compression, and
netdump. arm and mips platforms are omitted for now, since they are more
constrained and don't benefit as much from these features.
Reviewed by: cem, manu, rgrimes
Tested by: manu (arm64)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15465
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
An lld-linked i386 kernel hangs on boot, after em(4) starts. This seems
similar to the issue that prompted us to disable VIMAGE on arm64 in
r326179. Disable VIMAGE on i386 for now while we investigate.
PR: 225077
Sponsored by: The FreeBSD Foundation
Iwasaki-san's copyright over. Remove FIXME code that couldn't possibly
work. Call tc_settime() with our estimate of the delta we've been
alseep (the one we print) to adjust the time. Not sure what to do
about callouts, so keep the small #ifdef in place there.
Differential Revision: https://reviews.freebsd.org/D13823
Logically, extend r286288 to cover all threads, by default.
The world has largely moved on from i386. Most FreeBSD users and developers
test on amd64 hardware. For better or worse, we have written a non-trivial
amount of kernel code that relies on stacks larger than 8 kB, and it "just
works" on amd64, so there has been little incentive to shrink it.
amd64 had its KSTACK_PAGES bumped to 4 back in Peter's initial AMD64 commit,
r114349, in 2003. Since that time, i386 has limped along on a stack half
the size. We've even observed the stack overflows years ago, but neglected
to fix the issue; see the 20121223 and 20150728 entries in UPDATING.
If anyone is concerned with this change, I suggest they configure their
AMD64 kernels with KSTACK_PAGES 2 and fix the fallout there first. Eugene
has identified a list of high stack usage functions in the first PR below.
PR: 219476, 224218
Reported by: eugen@, Shreesh Holla <hshreesh AT yahoo.com>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
It is for console presented at 2001 and featuring Pentium III
processor. Even if any of them are still alive and run FreeBSD, we do
not have any sign of life from their users. While removing another
dozens of #ifdefs from the i386 sources reduces the aversion from
looking at the code and improves the platform vitality.
Reviewed by: cem, pfg, rink (XBOX support author)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13016
HEAD. Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.
Disable building LINT-VIMAGE with VIMAGE being default.
This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.
Requested by: many
Reviewed by: kristof, emaste, hiren
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12639
This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though
the second with predictable complications on hot-plug and reboot events).
I tested it with PEX 8717 and PEX 8733 chips, but expect it should work
with many other compatible ones too. It supports up to two NT bridges
per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows,
6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines
in those chips, but they are not yet supported.
While there, rename Intel NTB driver from generic ntb_hw(4) to more specific
ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and
alike to Linux naming.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Bring back the i486 option in GENERIC by default.
The code related to i386 CPU variants configuration has received many
changes in the last years: most of the features are detected automatically,
so there are no performance penalties from keeping the 486 support enabled.
Re-instate the 486 support: while the general configuration could still be
cleaned a bit, there is no advantage in removing it.
Differential Revision: https://reviews.freebsd.org/D9879
80486 production was stopped by Intel on September 2007. Dropping the 486
configuration option from the GENERIC kernel improves performance
slightly.
Removing I486_CPU is consistent at this time: we don't support any
processor without a FPU and the PC-98 arch, which frequently involved i486
CPUs, is also gone so we don't test such platforms anymore.
Relnotes: yes
MFC after: 2 weeks
https://reviews.freebsd.org/D9879
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).
Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).
No Objection From: arch@
and device npx.
This means that FPU is always initialized and handled when available,
and SSE+ register file and exception are handled when available. This
makes the kernel FPU code much easier to maintain by the cost of
slight bloat for CPUs older than 25 years.
CPU_DISABLE_CMPXCHG outlived its usefulness, see the removed comment
explaining the original purpose.
Suggested by and discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko
Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217
Please report problems to freebsd-net@freebsd.org
Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.
Submitted by: mmacy@nextbsd.org
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks and Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8299
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.
- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.
- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.
- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.
- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .
Sponsored by: Mellanox Technologies
Copy over amd64's cloudabi64_sysvec.c into i386 and tailor it to work.
Again, we use a system call convention similar to FreeBSD, except that
there is no support for indirect system calls (%eax == 0).
Where i386 differs from amd64 is that we have to store thread/process
entry arguments on the stack instead of using registers. We also have to
put an extra pointer on the stack for TLS (for GSBASE). Place that
pointer in the empty slot that is normally used to hold return
addresses. That seems to keep the code simple.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7590
This driver only supports 10Mb Ethernet using PIO (the hardware supports
DMA, but the driver only does PIO). There are not any PCCard adapters
supported by this driver, only ISA cards. In addition, it does not use
bus_space but instead uses bcopy with volatile pointers triggering a
host of warnings. (if_ie.c is one of 3 files always built with
-Wno-error)
Relnotes: yes
This hardware is not present on any modern systems. The driver is quite
hackish (raw inb/outb instead of bus_space, and raw inb/outb to random
I/O ports to enable ACPI since it predated proper ACPI support).
Relnotes: yes
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
The si(4) driver supported multiport serial adapters for ISA, EISA, and
PCI buses. This driver does not use bus_space, instead it depends on
direct use of the pointer returned by rman_get_virtual(). It is also
still locked by Giant and calls for patch testing to convert it to use
bus_space were unanswered.
Relnotes: yes
PCI-express HotPlug support is implemented via bits in the slot
registers of the PCI-express capability of the downstream port along
with an interrupt that triggers when bits in the slot status register
change.
This is implemented for FreeBSD by adding HotPlug support to the
PCI-PCI bridge driver which attaches to the virtual PCI-PCI bridges
representing downstream ports on HotPlug slots. The PCI-PCI bridge
driver registers an interrupt handler to receive HotPlug events. It
also uses the slot registers to determine the current HotPlug state
and drive an internal HotPlug state machine. For simplicty of
implementation, the PCI-PCI bridge device detaches and deletes the
child PCI device when a card is removed from a slot and creates and
attaches a PCI child device when a card is inserted into the slot.
The PCI-PCI bridge driver provides a bus_child_present which claims
that child devices are present on HotPlug-capable slots only when a
card is inserted. Rather than requiring a timeout in the RC for
config accesses to not-present children, the pcib_read/write_config
methods fail all requests when a card is not present (or not yet
ready).
These changes include support for various optional HotPlug
capabilities such as a power controller, mechanical latch,
electro-mechanical interlock, indicators, and an attention button.
It also includes support for devices which require waiting for
command completion events before initiating a subsequent HotPlug
command. However, it has only been tested on ExpressCard systems
which support surprise removal and have none of these optional
capabilities.
PCI-express HotPlug support is conditional on the PCI_HP option
which is enabled by default on arm64, x86, and powerpc.
Reviewed by: adrian, imp, vangyzen (older versions)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D6136
Submitted by: Jun Su <junsu microsoft com>
Reviewed by: jhb, kib, sephe
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5910
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993
