nodes from the DTB by default. This will allow us to enumerate the CPUs
without hard coding the CPU count into code.
Reviewed by: br
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D9827
with geom_flashmap(4) and teach it about MMC for slicing enhanced
user data area partitions. The FDT slicer still is the default for
CFI, NAND and SPI flash on FDT-enabled platforms.
- In addition to a device_t, also pass the name of the GEOM provider
in question to the slicers as a single device may provide more than
provider.
- Build a geom_flashmap.ko.
- Use MODULE_VERSION() so other modules can depend on geom_flashmap(4).
- Remove redundant/superfluous GEOM routines that either do nothing
or provide/just call default GEOM (slice) functionality.
- Trim/adjust includes
Submitted by: jhibbits (RouterBoard bits)
Reviewed by: jhibbits
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Summary:
NXP/Freescale, among others, includes an optional cell-index property
on nodes to denote the SoC block number of the node. This can be useful if, for
example, a node is disabled or nonexistent in the fdt, or the blocks are not
organized in address-sorted order. For instance, on the P1022, DMA2 is located
at CCSR offset 0xC000, while DMA1 is located at 0x21000.
Reviewed By: jmcneill
Differential Revision: https://reviews.freebsd.org/D8054
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
Make FDT blob available via opaque hw.fdt.dtb sysctl, if a DTB has been
installed by the time sysctls are registered.
Reviewed by: andrew
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D7411
- Introduce new OF API function OF_prop_free to free memory allocated by
OF_getprop_alloc and OF_getencprop_alloc. Current code just calls free(9)
with M_OFWPROP memory class which assumes knowledge about OF_*prop_alloc
functions' internals and leads to unneccessary code coupling
- Convert some of the free(..., M_OFWPROP) instances to OF_prop_free
Files affected by this commit are the ones I was able to test on real
hardware. The rest of free(..., M_OFWPROP) instances will be handled with
idividual maintainers
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D6315
- in atags
- in DT blob (by using 'fdt chosen' U-Boot command)
The command line must start with guard's string 'FreeBSD:' and can contain
list of comma separated kenv strings. Also, boot modifier strings from
boot.h are recognised and parsed into boothowto.
The command line must be passed from U-Boot by setting of bootargs variable:
'setenv bootargs FreeBSD:boot_single=1,vfs.root.mountfrom=ufs:/dev/ada0s1a'
followed by 'fdt chosen' (only for DT based boot)
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
is the physical memory size so may be larger than a u_long can hold, e.g.
on ARM with LPAE we could see an address space of up to 40 bits. On ARM
u_long is only 32 bits so the memory size will be truncated, possibly to
zero.
Reported by: bz
Sponsored by: ABT Systems Ltd
Use u_long instead of uint32_t variables to avoid overflow
in case of PA space bigger than 32-bit.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: andrew, br, wma
Differential revision: https://reviews.freebsd.org/D5393
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
use of fdt_fixup_table on PowerPC and ARM. As such we can remove it from
other architectures as it's unneeded.
Reviewed by: nwhitehorn
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5013
Strict compatibility requirement is a root of problems when simplebus'
node has two compatibility strings (i.e. on Armada38x). Removing this
requirement should not interfere with other platforms.
fdt_is_compatible_strict() and fdt_find_compatible() calls were changed
in fdt_common.c and mv_common.c.
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4602
Strictly speaking, missing devinfo is error which can be caused
by instantiating child using device_add_child() instead of
BUS_ADD_CHILD(). However, we can tolerate it.
Approved by: kib (mentor)
Summary:
The RouterBoard uses a predefined partition map which doesn't exist in the fdt.
This change allows overriding the fdt slicer with a custom slicer, and uses this
custom slicer to define the flash map on the RouterBoard RB800.
D3305 converts the mpc85xx platform into a base class, so that systems based on
the mpc85xx platform can add their own overrides. This change builds on D3305,
and creates a RouterBoard (RB800) platform to initialize the slicer override.
Reviewed By: nwhitehorn, imp
Differential Revision: https://reviews.freebsd.org/D3345
Some FDT nodes have complex properties organized as a child sub-nodes
(e.g. timing for LCD panel) we need easy way to obtain handles for
these sub-nodes
This is only the minimum set of files needed to boot in qemu. As such it is
missing a few things.
The bus_dma code is currently only stub functions with a full implementation
from the development tree to follow.
The gic driver has been copied as the interrupt framework is different. It
is expected the two drivers will be merged by the arm intrng project,
however this will need to be imported into the tree and support for arm64
would need to be added.
This includes code developed by myself, SemiHalf, Ed Maste, and Robin
Randhawa from ARM. This has been funded by the FreeBSD Foundation, with
early development by myself in my spare time with assistance from Robin.
Differential Revision: https://reviews.freebsd.org/D2199
Reviewed by: emaste, imp
Relnotes: yes
Sponsored by: The FreeBSD Foundation
duplicated code in the two classes, and also allows devices in FDT-based
systems to declare simplebus as their parent and still work correctly
when the FDT data describes the device at the root of the tree rather
than as a child of a simplebus (which is common for interrupt, clock,
and power controllers).
Differential Revision: https://reviews.freebsd.org/D1990
Submitted by: Michal Meloun
Provide sys/dev/fdt/simplebus.h with the class declaration so that it
is possible to subclass FDT simplebus.
Differential Revision: https://reviews.freebsd.org/D1886
Reviewed by: nwhitehorn, imp
Instead of reusing the same reg parsing code, create one, common function
that puts reg contents to the resource list. Address cells and size cells
are passed rather than acquired here so that any bus can have different
default values.
Obtained from: Semihalf
Reviewed by: andrew, ian, nwhitehorn
Sponsored by: The FreeBSD Foundation
node. Take this in to account by searching until we find the range for the
root node.
Differential Revision: https://reviews.freebsd.org/D1160
Reviewed by: ian
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Increasingly, FDT data has the "simple-bus" compatible string on nodes
that have children, but we wouldn't consider them to be busses. If the
node lacks a ranges property then we will fail to attach successfully,
so fail to probe as well.
node's interrupts=<...> property creating resource list entries with a
single common implementation. This change makes ofw_bus_intr_to_rl() the
one true copy of that code and removes the copies of it from other places.
This also adds handling of the interrupts-extended property, which allows
specifying multiple interrupts for a node where each interrupt can have a
separate interrupt-parent. The bindings for this state that the property
cells contain an xref phandle to the interrupt parent followed by whatever
interrupt info that parent normally expects. This leads to having a
variable number of icells per interrupt in the property. For example you
could have <&intc1 1 &intc2 26 9 0 &intc3 9 4>.
Differential Revision: https://reviews.freebsd.org/D803
in the clocks=<...> properties of their FDT data. The clock properties
consist of 2-cell tuples, each containing a clock device node reference and
a clock number. A clock device driver can register itself as providing
this interface, then other drivers can turn the FDT clock node reference
into the corresponding device_t so that they can use the interface to query
and manipulate their clocks.
This provides convenience functions to enable or disable all the clocks
listed in the properties for a device, so most drivers will be able to
manage their clocks with a single call to fdt_clock_enable_all(dev).
