Commit Graph

1018 Commits

Author SHA1 Message Date
Peter Wemm
233036aac1 Use sigemptyset rather than sa_mask = 0.
Submitted by:	"John W. DeBoskey" <jwd@unx.sas.com>
1999-09-30 19:55:00 +00:00
Jordan K. Hubbard
56373d38a8 Sigh, too many late nights! 1999-09-30 08:32:35 +00:00
Jordan K. Hubbard
222e52ceae Oh bollocks, I really screwed up the "auto" check here. Time
to crack the K&R; I must have forgotten the C language. :)

Embarrassingly noticed by:	Howard Gutch <logix@foobar.franken.de>
1999-09-27 21:48:28 +00:00
Bill Paul
1088f6c7c1 Spruce up the ADMtek driver: conver to newbus, miibus and add support
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).

Also updated various documentation to mention the AN985 and created
a loadable module.

I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
1999-09-22 05:07:51 +00:00
Mark Murray
df3819c1b4 Prepare for K5. 1999-09-19 22:30:39 +00:00
Jordan K. Hubbard
6dc5df3d74 execute a strategic clear. 1999-09-19 08:24:32 +00:00
Jordan K. Hubbard
04270f9e70 Deal with new "auto" setting for network_interfaces. 1999-09-19 07:46:55 +00:00
Jordan K. Hubbard
eeeeec707a MF3: various small tweaks. 1999-09-17 09:32:22 +00:00
Jordan K. Hubbard
b1da34ca31 If enlightenment is present, gnome-session starts it automagically. 1999-09-15 02:52:56 +00:00
David E. O'Brien
34dda9f49f Foo. Maybe I should get Peter to hook ispell up in commit_prep.pl. 1999-09-14 10:38:45 +00:00
David E. O'Brien
029cd954bb Add the NIS domain to the tweakable knobs. 1999-09-14 09:15:35 +00:00
Jordan K. Hubbard
543992e0df Apparently, it's not console=serial to set the serial console,
it's serial=comconsole.  I wish it were easier to figure this
stuff out. :)

Submitted by:	jfieber
1999-09-13 16:24:08 +00:00
Jordan K. Hubbard
3349701ae5 Provide another installation option for GNOME so we have the more "classic
GNOME" desktop that Debian does as an option.
1999-09-08 04:48:26 +00:00
Jordan K. Hubbard
7bd659ebaf Only do dhclient once; it has its own internal retry which is more than
long enough (and doing it multiple times results in a dialog which waits
AGES to complete).
1999-09-06 15:06:17 +00:00
Bill Paul
e5a9fd5435 This commit adds driver support for PCI fast ethernet NICs based on
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.

The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."

This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
1999-09-06 06:14:30 +00:00
Bill Paul
9555e59a1e This commit adds driver support for the Silicon Integrated Systems
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.

This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
1999-09-05 21:01:03 +00:00
Jordan K. Hubbard
dc05425fa3 Update to XFree86 release 3.3.5 1999-09-04 16:24:33 +00:00
Jordan K. Hubbard
29ed216a4d o Catch up with pnp changes - kget no longer saves pnp data.
o Catch up with ncurses updates - some internal function names have changed.
1999-09-04 16:01:15 +00:00
Jordan K. Hubbard
68318acfc3 It's "router_flags" not "routerflags"
Submitted by:	kasey@ambernetworks.com
PR:		13534
1999-09-02 11:55:11 +00:00
Jordan K. Hubbard
3910e95363 Oh crud, did I ever screw the pooch! Rather than sync this with -stable,
I backed-out the changes in -current and didn't touch stable at all (I
thought I had my patch order reversed, not what actually happened).
AIEEE!  I can't even blame the crack for this one since I broke my
crack pipe a few weeks ago.  I think sleep deprivation gets the blame
for this one.

Medal for noticing this one goes to:	Jim Bloom <bloom@acm.org>
1999-09-02 00:51:16 +00:00
Jordan K. Hubbard
d03dcaa779 MFC: Catch 3.2-stable sysinstall up to 4.0-current level functionality,
bringing in DHCP support.  The only thing I left out were Poul-Henning's
newfs changes since I'm not sure if he's brought the rest of that support
into -stable yet.  If it turns out that this is the case, I'll MFC those
changes too.
1999-09-01 04:29:30 +00:00
Brian Somers
3655c82c30 Ppp is started on vty2, not vty3 1999-09-01 00:53:25 +00:00
Jordan K. Hubbard
979b9153d4 Always set the MBR value. When you leave it uninitialized, it seems
like libdisk does bad things. :)
1999-08-28 12:10:13 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Jordan K. Hubbard
40a94c5bc6 Fix a typo.
Reported by:	Terry Jones <terry@cliffs.ucsd.edu>
1999-08-27 06:25:37 +00:00
Jordan K. Hubbard
989a239a42 Fix assorted style problems and bring up to date.
Submitted by:	Alexey M. Zelkin <phantom@cris.net>
PR:		13271
1999-08-22 05:14:23 +00:00
Bill Paul
23e4757cd7 This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)

This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.

The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00
Jordan K. Hubbard
a57fdae0a0 Quiet some overly chatty debug output, do some minor cleanups to
the DHCP support code.
1999-08-21 07:13:20 +00:00
Chris Costello
f437b38cf7 Fix a bunch of broken cross-references 1999-08-18 05:55:22 +00:00
Mike Pritchard
cd31900403 The sysinstall man page menetions that it was due to be replaced
in a previous FreeBSD version.  That never happened.  Document that
it is due to be replaced, but leave it open-ended as to when.

Also do some mdoc cleanup.

PR:		docs/13148
PR:		docs/13144
Submitted by:	Lee Cremeans <lcremeans@erols.com>
		Alex M. Zelkim <phantom@cris.net>
Discussed with: jkh
1999-08-17 10:57:18 +00:00
Jordan K. Hubbard
58e59935e6 Re-enable play-nice-with-DHCP option now that bpf is the default
in GENERIC.  Now a dhcp-configured system will both install and boot
initially with proper interface configuration.
1999-08-07 01:43:39 +00:00
Søren Schmidt
6ed561dcf3 Add a local distribution under the "costum distribution" menu.
This allows to add local additions on install time..
1999-08-05 20:04:56 +00:00
Poul-Henning Kamp
8a9b8e429b Make the newfs parameters a global option.
The default is still "-b 8192 -f 1024" but my experiments show that
"-b 16384 -f 4096 -c 100" is a more sensible value for modern
disksizes.
1999-08-05 19:50:26 +00:00
Jordan K. Hubbard
88ed36c1ec Stay on the serial console if installed that way.
Requested by:	max
1999-08-05 10:07:09 +00:00
Satoshi Asami
c32d66c130 Add new ports category "ftp". 1999-08-02 11:33:19 +00:00
Bill Fumerola
66085eafa5 Add the 'Swiss' font, which refers to the name of the font, not the locale.
Apologies To:	Dan Nelson <dan@emsphone.com>
1999-07-29 21:15:10 +00:00
Bill Fumerola
e3bae09e70 we only need to declare i if we are building for the alpha. 1999-07-29 21:12:54 +00:00
Brian Somers
7078355be0 Allow room for editing labels on disks that are >= 10000Mb
Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
1999-07-29 06:28:52 +00:00
Jordan K. Hubbard
6bac631969 Don't show fdisk choice on Alpha.
Suggested by:		obrien
1999-07-29 06:23:17 +00:00
Brian Somers
51f80ae148 Add a default ppp.conf (mode 600).
Originally submitted by: Wayne Self <wself@cdrom.com>

Allow a ppp startup option in rc.conf.

Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.

Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
1999-07-26 10:49:37 +00:00
Bill Paul
691c152864 This commit adds device driver support for Adaptec Duralink PCI fast
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.

The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.

This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
Jordan K. Hubbard
5706693521 Disable more PC98isms on the Alpha 1999-07-23 15:39:51 +00:00
Jordan K. Hubbard
6181e5c577 More changes for the Alpha X support - don't list PC98 servers since they make
no sense here but list the TGA server, since it does.
1999-07-23 03:42:23 +00:00
Jordan K. Hubbard
d49c1fb83f Deal with new linux compat package naming.
Submitted by:	Marcel Moolenaar <marcel@scc.nl>
1999-07-22 09:18:12 +00:00
Jordan K. Hubbard
5bc001833f Intentionally do the wrong thing in using the initial DHCP values for
ifconfig, essentially stealing the lease until the user goes and changes
it.  The alternative, sadly, is total dysfunction since bpf isn't in
GENERIC and network connectivity would otherwise fail completely on first
bootup when DHCP configuration was attempted again.

The ultimate answer here is to make either bpf a loadable kernel module
(which security conscious admins will be able to simply remove from /modules)
or come up with a lighter weight mechanism just for dhcp and other apps that
need to see broadcast packets but not otherwise sniff the wire in full
bpf glory.
1999-07-22 08:51:42 +00:00
Jordan K. Hubbard
eb31d123ad XFree86 3.3.4 seems to require "XWINHOME" to be set for the setup tool
to work (fnark).
1999-07-20 21:06:18 +00:00
Jordan K. Hubbard
9df36b4d0d The matcd driver is acting strange (returning a successful open even
when it fails).  Disable it in sysinstall for now.
1999-07-20 08:47:35 +00:00
Jordan K. Hubbard
2d0fba453e Fix a bad dhcp keyword; it's host-name not server-name. 1999-07-20 08:08:24 +00:00
Jordan K. Hubbard
6aa3426ca9 Add slovakian ftp mirror.
Submitted by:		"Tomas TPS Ulej" <tps@ti.sk>
1999-07-20 07:50:26 +00:00
Jordan K. Hubbard
305fbc7e78 More Alpha ifdefage. 1999-07-20 07:39:22 +00:00