It seems that libkern/mcount.c is the only consumer of vm/pmap.h that
does not include machine/atomic.h. Make it work by bringing
machine/atomic.h when pmap.h is used for kernel non-asm .c file.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pmap_kextract().
pmap_kextract() can race with promotion/demotion on the kernel page
table, in which case current non-atomic 64bit read would see torn
value, breaking pmap_kextract(). pmap_kextract() would correctly
handle either promoted or demoted PDE, but not a mix where one word
is from a different state.
It requires PAE and > 4G memory to reproduce. We observed this in
real loads, both for intensive use of malloc(9)/free(9) where
vtoslab() returned invalid pointer to the slab, and with the use of
busdma_bounce, where incorrect page was bounced.
In collaboration with: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18714
It is useful for inspecting tlb shootdown hangs. The smp_tlb_generation value
is available using regular ddb data inspection commands.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This KPI may in principle be used to create kernel mappings, in which
case we certainly should not be setting PG_U. In any case, PG_U must be
set on all layers in the page tables to grant user mode access, and we
were only setting it on leaf entries. Thus, this change should have no
functional impact.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Due to the typo, it shared the frame with the CMAP1 transient mapping.
In collaboration with: pho
MFC after: 3 days
Sponsored by: The FreeBSD Foundation (kib)
With the introduction of M_EXEC support for kmem_malloc(), some kernel
mappings start having NX bit set in the paging structures early, for
PAE kernels on machines with NX support, i.e. practically on all
machines. In particular, AP trampoline and initialization needs to
access pages which translations has NX bit set, before initializecpu()
is called.
Check for CPUID NX feature and enable EFER.NXE before we enable paging
in mp boot trampoline. This allows the CPU to use the kernel page
table instead of generating page fault due to reserved bit set.
PR: 233819
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On some architectures, the structures returned by PT_GET*REGS were not
fully populated and could contain uninitialized stack memory. The same
issue existed with the register files in procfs.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Security: kernel stack memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18421
We zero the whole structure; we don't need to zero the __spare__ field again.
Remove trailing whitespace.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Include evdev support and drivers in the amd64 and i386 GENERIC and MINIMAL
kernels. Evdev is used by X and wayland to handle input devices, and this
change, together with upcomming changes in ports will make us handle input
devices better in graphical UIs.
Reviewed by: wulf, bapt, imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D17912
Avoid using DELAY() since it can try to use spin locks on CPUs without
a P-state invariant TSC. For cpu_lock_delay(), always use the TSC if
it exists (even if it is not P-state invariant) to delay for a
microsecond. If the TSC does not exist, read from I/O port 0x84 to
delay instead.
PR: 228768
Reported by: Roger Hammerstein <cheeky.m@live.com>
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17851
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
Add a new 'debugger_on_trap' knob separate from 'debugger_on_panic'
and make the calls to kdb_trap() in MD fatal trap handlers prior to
calling panic() conditional on this new knob instead of
'debugger_on_panic'. Disable the new knob by default. Developers who
wish to recover from a fatal fault by adjusting saved register state
and retrying the faulting instruction can still do so by enabling the
new knob. However, for the more common case this makes the user
experience for panics due to a fatal fault match the user experience
for other panics, e.g. 'c' in DDB will generate a crash dump and
reboot the system rather than being stuck in an infinite loop of fatal
fault messages and DDB prompts.
Reviewed by: kib, avg
MFC after: 2 months
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17768
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
We're planning on removing adv, adw, aha, aic, bt, ncv, nsp, and stg
soon. They have been tagged for removal in 12. At least get them out
of GENERIC.
MFC after: 3 days
Relnotes: yes
When modifying an existing managed mapping, we should find a PV entry
for the old mapping. Verify this.
Before r335784 this would have been implicitly tested by the fact that
we always freed the PV entry for the old mapping.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17626
With lld 7.0.0, a rather nasty problem in our kernel linker script came
to light. We use quite a lot of so-called "orphan" sections, e.g.
sections which are not explicitly named in the linker script. Mainly,
these are the linker sets (such as set_sysinit_set).
Note that the placement of these orphan sections is not very well
defined. Usually, any read-only orphan sections get placed after the
last read-only section from the linker script, and similarly for the
read/write variants.
In our linker scripts, there are also symbol assignments like _etext,
_edata, and __bss_start, which are used in various places to refer to
the start or end addresses of sections.
However, some of these symbol assignments are interspersed with output
section descriptions. While the linker will guarantee that a symbol
assignment after some section will stay after that section, there is no
guarantee that an orphan section cannot be inserted just before it.
Take for example the following script:
SECTIONS
{
.data : { *(.data) }
__bss_start = .;
.bss : { *(.bss) }
}
If an orphan section (like set_sysinit_set) is now inserted just after
the __bss_start assignment, __bss_start will actually point to the start
of that orphan section, *not* to the start of the .bss section.
Unfortunately, something like this happened with our i386 kernel linker
script, and since sys/i386/i386/locore.s tries to zero .bss, it ended up
zeroing all the linker sets too, leading to a crash very soon after the
<--BOOT--> message.
To fix this, move the __bss_start symbol assignment *into* the .bss
section description, so there is no way a linker can then insert orphan
sections at that point. Also add a corresponding __bss_end symbol.
In addition, change sys/i386/i386/locore.s, so it clears from
__bss_start to __bss_end, instead of assuming that _edata is just
before .bss (which may not be true), and that _end is just after _bss
(which also may not be true).
This allows an i386 kernel linked with lld 7.0.0 to boot successfully.
configuring kernels for i386, amd64, and arm64.
The 'GEOM_PART_GPT' option was added to the DEFAULTS configuration
in r337967.
Approved by: re (kib@)
Reviewed by: ler@
Differential Revision: https://reviews.freebsd.org/D17458
Sponsored by: Netflix, Inc.
Belatedly add a comment to the amd64 pmap explaining why we initialize
the kernel pmap's resident page count.
Reviewed by: alc, kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17377
This reverts part of r333368. The attempt to clear DR6 was occuring
too soon as trapsignal() does not pause to let the debugger notice the
SIGTRAP and query DR6. The signal exchange does not occur until much
later during ast(). As a result, GDB was no longer recognizing
hardware breakpoints and watchpoints on x86.
In addition, any userland programs that want to inspect DR6 in a
SIGTRAP handler don't have a way to do this if we clear DR6 in the
exception handler.
Instead of relying on the kernel to clear DR6, debuggers will have to
explicitly clear it after a trace trap (which they needed to do on
older kernels anyway).
Reviewed by: kib
Approved by: re (delphij)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17319
This simplifies the runtime logic and reduces the number of
runtime-constant branches.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D16736
Since ifunc-capable linker is now required on i386, bring this code in
line with the amd64 counterpart.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D16736
Exposing max_offset and min_offset defines in public headers is
causing clashes with variable names, for example when building QEMU.
Based on the submission by: royger
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Approved by: re (marius)
Differential revision: https://reviews.freebsd.org/D16881
Curpmap must be already valid when cpu_throw() is called, even for early
AP startup.
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16893
Add pmap_activate_boot() for i386, move the invocation on APs from MD
init_secondary() to x86 init_secondary_tail().
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16893
Revert r338177, r338176, r338175, r338174, r338172
After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver. Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.
It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).
Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.
Requested by: re@ (gjb, rgrimes)
The boot-time ifunc resolver assumes that it only needs to apply
IRELATIVE relocations to PLT entries. With an upcoming optimization,
this assumption no longer holds, so add the support required to handle
PC-relative relocations targeting GNU_IFUNC symbols.
- Provide a custom symbol lookup routine that can be used in early boot.
The default lookup routine uses kobj, which is not functional at that
point.
- Apply all existing relocations during boot rather than filtering
IRELATIVE relocations.
- Ensure that we continue to apply ifunc relocations in a second pass
when loading a kernel module.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16749
As discussed on the MLs drm2 conflicts with the ports' version and there
is no upstream for most if not all of drm. Both have been merged in to
a single port.
Users on powerpc, 32-bit hardware, or with GPUs predating Radeon
and i915 will need to install the graphics/drm-legacy-kmod. All
other users should be able to use one of the LinuxKPI-based ports:
graphics/drm-stable-kmod, graphics/drm-next-kmod, graphics/drm-devel-kmod.
MFC: never
Approved by: core@
