Replacing rtsock with netlink also means providing similar tracing facilities,
rtsock provides `route -n monitor` interface, where each message can be traced
to the originating PID.
This diff closes the feature gap between rtsock and netlink in that regard.
Netlink works slightly differently from rtsock, as it is a generic message
"broker". It calls some kernel KPIs and returns the result to the caller.
Other Netlink consumers gets notified on the changed kernel state using the
relevant subsystem callbacks. Typically, it is close to impossible to pass
some data through these KPIs to enhance the notification.
This diff approaches the problem by using osd(9) to assign the relevant
socket pointer (`'nlp`) to the per-socket taskqueue execution thread.
This change allows to recover the pointer in the aforementioned notification
callbacks and extract some additional data.
Using `osd(9)` (and adding additional metadata) to the notification receiver
comes with some additional cost attached, so this interface needs to be
enabled explicitly by using a newly-created `NETLINK_MSG_INFO` `SOL_NETLINK`
socket option.
The actual medatadata (which includes the originator PID) is provided via
control messages. To enable extensibility, the control message data is
encoded in the standard netlink(TLV-based) fashion. The list of the
currently-provided properties can be found in `nlmsginfo_attrs`.
snl(3) is extended to enable decoding of netlink messages with metadata
(`snl_read_message_dbg()` stores the parsed structure in the provided buffer).
Differential Revision: https://reviews.freebsd.org/D39391
If one interface has a carp address configured on it ifconfig would show
this information on all interfaces.
That's because the kernel does (as one would expect) not return any carp
data for interface without carp configuration. However, this wound up
not overwriting the data passed in by the caller, and leaving the (now
stale) information in pace. As a result the caller thought carp was
configured on the interface.
Zero out the input structure before making the call to the kernel, so
that we correctly return 0 if there is no carp configuration on the
queried interface.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The two main uses of dev_t are in struct stat and as a parameter of the
mknod system calls.
As of version 2.6.0 of the Linux kernel, dev_t is a 32-bit quantity
with 12 bits set asaid for the major number and 20 for the minor number.
The in-kernel dev_t encoded as MMMmmmmm, where M is a hex digit of the
major number and m is a hex digit of the minor number.
The user-space dev_t encoded as mmmM MMmm, where M and m is the major
and minor numbers accordingly. This is downward compatible with legacy
systems where dev_t is 16 bits wide, encoded as MMmm.
In glibc dev_t is a 64-bit quantity, with 32-bit major and minor numbers,
encoded as MMMM Mmmm mmmM MMmm. This is downward compatible with the Linux
kernel and with legacy systems where dev_t is 16 bits wide.
In the FreeBSD dev_t is a 64-bit quantity. The major and minor numbers
are encoded as MMMmmmMm, therefore conversion of the device numbers between
Linux user-space and FreeBSD kernel required.
In between kern_fstat() and translate_fd_major_minor(), another process
having the same filedesc could modify or close fd.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D39763
Get rid of calling Linux stat translation hook and specific to Linux
handling of non-vnode dirfd from kern_statat(),
Reviewed by: kib, mjg
Differential revision: https://reviews.freebsd.org/D35474
As of version 2.6.0 of the Linux kernel, dev_t is a 32-bit unsigned integer
on all platforms. Prior the 2.6 kernel dev_t type was an unsigned short.
However, since the firs commit of the Linuxulator, mknod syscall get int dev
argument.
Also, there is some confusion here, while the kernel declares a dev_t type
as a 32-bit sized, the user-space dev_t type can be size of 64 bits, e.g.,
in the Glibc library.
To avoid confusion and to help porting of the Linuxulator to other platforms
use explicit l_dev_t for dev argument of mknod syscalls.
Just for future changes of the conditional Linuxulator build. We need
a small refactoring of the MI code to help porting Linuxulator to other
platforms.
This is required to enable capsicum for the snapshot code.
Reviewed by: corvink
Sponsored by: vStack
Differential Revision: https://reviews.freebsd.org/D38858
Fix vfs_emptydir(). It would consider directories containing directories
with name of the form 'X.' (X being any authorized byte) as empty. Also,
it would cause VOP_READDIR() to return an error on directories
containing enough whiteouts. While here, use a more decently sized
buffer as done elsewhere.
Remove ad-hoc iteration on the directory's content and instead use the
newly exported vn_dir_next_dirent() function (this is what fixes the
second problem mentioned above).
PR: 270988
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39775
Simplify the old interface (one less argument, simpler termination test)
and add documentation about it. Add more sanity checks (mostly under
INVARIANTS, but also in the general case to prevent infinite
loops). Drop the explicit test on minimum directory entry size (without
INVARIANTS).
Deal with the impacts in callers (dirent_exists() and vop_stdvptocnp()).
dirent_exists() has been simplified a bit, preserving the exact same
semantics but for the return code whose meaning has been reversed (0 now
means the entry exists, ENOENT that it doesn't and other values are
genuine errors). While here, suppress gratuitous casts of malloc return
values.
vn_dir_next_dirent() has been tested by a 'make -j4 buildkernel' with a
temporary modification to the VFS cache causing vn_vptocnp() to always
call VOP_VPTOCNP() and finally vop_stdvptocnp() (observed with temporary
debug counters).
Export new _GENERIC_MINDIRSIZ and _GENERIC_MAXDIRSIZ on __BSD_VISIBLE,
and GENERIC_MINDIRSIZ and GENERIC_MAXDIRSIZ on _KERNEL.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39764
Move internal-to-'vfs_default.c' get_next_dirent() to 'vfs_vnops.c' and
export it for use by other parts of the VFS. This is a preparatory
change for using it in vfs_emptydir().
No functional change.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39755
FreeBSD/powerpc64 is all ELFv2 since FreeBSD 13, even big endian. The
existing sha256 and sha512 asm code assumes that BE is all ELFv1, and LE
is ELFv2. Minor changes to add ELFv2 in the BE side gets this working
correctly on FreeBSD with latest OpenZFS import.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Closes#14779
TX_COMMIT has no on-disk representation and does not produce any more
dirty data. It should not wait for anything, and even just skipping
the checks if not waiting gives improvement noticeable in profiler.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14798
- assumption that single-zone countries do not have description
is no longer correct; do not try to optimize this case as it's
only going to make the code more confusing and we now have menus
with a single zone selection because of this
- remove the single-country continent short cut, it also only serves
to confuse users as we now have such a continent
- instead add a single-zone contry short cut (see above), now all
single-zone countries fall here
- use the #@ continent overrides that zone1970.tab introduces (this is
visible at least fixing Iceland being currently listed under Africa)
- add Arctic Ocean "continent" coming only from the overrides at the
moment
- update baseline with the changes
Reviewed by: bapt, philip
Differential Revision: https://reviews.freebsd.org/D39606
Otherwise KMSAN only detects uninitialized memory when the contents of
the buffer are copied out to userspace or transmitted to a network
interface. At that point the KMSAN violation will be far removed from
its origin, so let's try to make debugging such problems a bit easier.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38101
Implement the pam_sm_authenticate method, using the noop argument of
lzc_load_key to do a passphrase check without actually loading the key.
This allows using ZFS as the source of truth for user passwords,
without storing any password hashes in /etc or using other PAM modules.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Felix Dörre <felix@dogcraft.de>
Signed-off-by: Val Packett <val@packett.cool>
Closes#14789
When testing cap_connect() and name/addr lookup functions, skip tests if
we fail and the error is not ENOTCAPABLE. This makes the tests amenable
to running in CI without Internet connectivity.
Reviewed by: oshogbo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39242
Adapt hda_print_cmd_ctl_data() to not generate compiler warnings
when DEBUG_HDA is off.
Reviewed by: corvink
Approved by: corvink
Differential Revision: https://reviews.freebsd.org/D39826
The x18 register isn't useable within FreeBSD kernel space, so we
have to fix the BLAKE3 aarch64 assembly for not using it.
The source files are here: https://github.com/mcmilk/BLAKE3-tests
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14728
Keep in sync with the recent upstream changes:
Fix compilation on 32-bit architectures
Update IP length, UDP length/checksum when size changes
Man page fixes
Submitted by: jlduran@gmail.com
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D39760
The x18 register isn't useable within FreeBSD kernel space, so we
have to fix the BLAKE3 aarch64 assembly for not using it.
The source files are here: https://github.com/mcmilk/BLAKE3-tests
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14728