Commit Graph

306 Commits

Author SHA1 Message Date
KATO Takenori
61b80893b2 Moved prototypes of scsi_data, scsi_link and proc before scsi_adapter.
If PC98 is defined, the type of the first argument of open_target_lu
is scsi_link structure.
1997-04-03 10:09:29 +00:00
John-Mark Gurney
21a69f7c65 add a cd quirk flag CD_Q_BCD_TRACKS, that will convert bcd2bin the track
id's from broken scsi cdrom drives like my Chinon... plus update the quirk
entry for it :)

Closes my own PR#2423
1997-04-02 09:05:43 +00:00
Joerg Wunsch
e49784d15d Add an entry for the newer Philips CDD26xx family CD-R drives. They
come out with PHILIPS as the vendor string, as opposed to IMS for the
older ones.

Submitted by:	"Brian N. Handy" <handy@sag.space.lockheed.com>
1997-04-01 19:28:03 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Bruce Evans
a02b0b9694 Removed nested #includes of <scsi/scsi_debug.h> and <scsi/scsi_driver.h>
from <scsi/scsiconf.h> and fixed everything that depended on them.
(Missed this one.)
1997-03-24 04:26:46 +00:00
Justin T. Gibbs
65e5a3a9df free_xs must be called at splbio(). This is usually the case since the main
caller is scsi_done which the controller interrupt handlers call.  In the
case of a non-buffer based transaction, the xs structure is freed by the
process that initiated the transfer in scsi_scsi_cmd.  In this case, an
explicit splbio/splx pair around the call to free_xs is required.  Without
the splbio protection, the xs free list could be corrupted, and the type
driver's start routine might run without spl protection.

Submitted by:	Tor Egge <Tor.Egge@idt.ntnu.no>
Obtained from: PR kern/2891
1997-03-24 01:46:15 +00:00
Bruce Evans
6617929964 Removed nested #includes of <scsi/scsi_debug.h> and <scsi/scsi_driver.h>
from <scsi/scsiconf.h> and fixed everything that depended on them.
1997-03-23 06:33:55 +00:00
Bruce Evans
08febfa741 Removed nested #include of <sys/conf.h> from <scsi/scsi_driver.h>
and fixed everything that depended on getting it from the wrong
place.  Most of the broken things actually only depended on getting
the declaration of their interrupt handler from "ioconf.h".
1997-03-23 04:40:00 +00:00
Bruce Evans
3ac4d1ef0c Don't #include <sys/fcntl.h> in <sys/file.h> if KERNEL is defined.
Fixed everything that depended on getting fcntl.h stuff from the wrong
place.  Most things don't depend on file.h stuff at all.
1997-03-23 03:37:54 +00:00
Joerg Wunsch
930bb1a4da Add a quirk entry for the HP6020i, after John has just confirmed that
it works now.

Submitted by:	jhay@zibbi.mikom.csir.co.za (John Hay)
1997-03-10 20:51:17 +00:00
Joerg Wunsch
f357773315 Merge Jason Thorpe's updated changer stuff into the actual system.
Many things have been changing in the kernel since mid-1996, so there's
quite some amount of diffs here already.  It compiles, but i cannot
test it anywhere here.

2.2 candidate?

Closes PR # 1201.
1997-03-06 15:36:45 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
John Dyson
996c772f58 This is the kernel Lite/2 commit. There are some requisite userland
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.

The system boots and can mount UFS filesystems.

Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
		Mount_std mounts will not work until the getfsent
		library routine is changed.

Reviewed by:	various people
Submitted by:	Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Joerg Wunsch
17d9b79a9f Add an entry for the Nakamichi 4-disk changer.
Submitted by:	K.R.Marshall@ukc.ac.uk (K.R.Marshall)
1997-02-08 13:26:31 +00:00
Bill Paul
9baa6352dc Make some small tweaks to the messages to clean up some stuff
from last time. Some people have pointed out that there were some odd
side-effects in the changes I made. Two things are different:

- sc_print_addr() will print 'foodev0:' (i.e. sd0:, st0:, cd0:, etc...)
  if the device name is known. If it's not known, it'll use a longer
  notation. This shortens error messages back to a sane length.

- Added a small function called sc_print_init() to set the sc_printing
  flag so that sc_print_addr() will know that we want it to print a
  linefeed. Used this in scsi_device_attach() to restore proper carriage
  return printing behavior which I broke.

Remaining bogons: the NCR SCSI driver prints out information while the
device-specific attach routine is running with its own linefeeds. This
breaks up the individual messages emitted by the subdriver modules and
causes at least one message to appear on a line by itself without a
device spec prefix. I'm not sure of the correct way to fix this, and
I don't have any NCR SCSI hardware to test with anyway.

There's probably more, but I gather that a rewrite of the SCSI subsystem
is pending anyway, so I'll leave the rest to Those Who Know More About
This Than I (tm).
1997-02-08 03:42:22 +00:00
Joerg Wunsch
ab865e3435 After so many people have been bugging me :), finally implement
read-mode access to CD-ROM media in the worm(4) driver.  No whistles
and bells yet, like all the CDIO* commands, but at least a start.

In order to do this, i had to slightly rearrange the semantics of an
open(2) on the worm driver: now, opening it with O_NONBLOCK set means
no actual IO operations will be intended but only ioctls are to be
processed.  This mode is used by wormcontrol(8) to prepare a track
and/or session.

I have only been able to test this on a 2.2-GAMMA system by now, and
only the !DEVFS part is tested yet.  Also, i have only done a dummy
burn so far, but wouldn't expect many surprises else.  Report bugs to
me ASAP, if there's reasonable demand and i hear no objections, i
might consider merging it into the 2.2 branch as well.
1997-02-06 22:19:44 +00:00
KATO Takenori
ed39d36d27 Moved PC-98 routine in sd_get_parms() to pc98_machdep.c. 1997-02-04 22:27:09 +00:00
Joerg Wunsch
c1b822b746 Do not accidentally default a device that failed probing to T_DIRECT
(since T_DIRECT just incidentally happens to be equal 0).  This causes
more harm than it would do good.  Instead , get it at the uk driver.

Reviewed by:	obrien@NUXI.com (David O'Brien)
1997-02-02 20:57:12 +00:00
Joerg Wunsch
ecd20d9e4d Fix a benign type mismatch i've introduced in rev 1.40.
Pointed out by:	bde
1997-01-30 22:47:55 +00:00
Bruce Evans
0f49e57b57 Removed `Debugger("no slices")'. It's normal and harmless to have no
slices in sd_open() after a media change when the previous sd_open()
discards the previous slices and then fails.  sd_open() just handles
media changes poorly and fails too often.
1997-01-29 14:18:34 +00:00
Bill Paul
fc7c79b907 Make the SCSI probe messages more BSDish. This may raise a few eyebrows
("Hey! Who made _you_ the keeper of all things BSDish?!") but this has
bugged me for a long time, and now that I finally have the chance
to hack on it (and test the results), I'll take my chances. I can also
point to other BSD implementations for precedents if you put my back to
the wall.

The only thing that's changed is how the messages are formatted. Now,
instead of having this:

aha0 at 0x330-0x333 irq 11 drq 5 on isa
(aha0:3:0): "HP C1553A 9503" type 1 removable SCSI 2
st0(aha0:3:0): Sequential-Access density code 0x24, variable blocks, write-enabled
(aha0:3:1): "HP C1553A 9503" type 8 removable SCSI 2
ch0(aha0:3:1): Medium-Changer 6 slot(s) 1 drive(s) 0 arm(s) 0 i/e-slot(s)

We have this:

aha0 at 0x330-0x333 irq 11 drq 5 on isa
scbus0 at aha0 bus 0
st0 at scbus0 target 3 lun 0
st0: <HP C1553A 9503> type 1 removable SCSI 2
st0: Sequential-Access density code 0x24, variable blocks, write-enabled
ch0 at scbus0 target 3 lun 1
ch0: <HP C1553A 9503> type 8 removable SCSI 2
ch0: Medium-Changer 6 slot(s) 1 drive(s) 0 arm(s) 0 i/e-slot(s)

Which is (to me anyway) is a lot more pleasant to look at. (Call me
crazy -- g'head: you know you wanna -- but the previous messages remind
me of Linux. Ever see the output from the linux device probes? It's a mess
of copyright notices, version numbers/dates, author e-mail addresses and
other crap. Let's not go there, okay? Bleh.)

Notice that devices are now specified in terms of the scsi bus they
live on rather than the adapter. This better reflects the contents
of the kernel config file (if you use wired-down device specifications
anyway) and removes some ambiguity that may arise if you have a multi-
channel adapter with more than one bus.

Also, sc_print_addr() now generates messages like this:
st0 at scbus0 target 3 lun 0: NOT READY asc:3a,0 Medium not present

instead of this:
st0(aha0:3:0): NOT READY asc:3a,0 Medium not present

I also added a quirk entry for the HP Superstore 12000e 6 tape DAT
autoloader, which needs SC_MORE_LUS in order for the changer device
to be properly probed and attached. (I'm working on a chcontrol utility
to manipulate the changer on this drive which should hopefully be general
enough to work with other changers too. If you want the prototype I have
now, it's at ftp://skynet.ctr.columbia.edu/pub/freebsd/changer.c.)

Remaining bugs:

- The 'foodev0: yadda yadda yadda' bits should probably be printed entirely
  by the device-specific subdriver attach code instead of half by the
  scsi_device_attach() routine and half by the device specific attach
  routine like it is now.

- The wired-down device specifications in the kernel config file should
  be used to control bus/device probing to some extent rather than just
  for choosing names for devices we find. If the config says there's a
  device at scbus0 target 0 lun 0 called sd0, we should look there and
  check for a device that can be managed by the sd driver. If we don't
  find one, we should probably complain that there's no device there or
  that there is a device but of the wrong type. Once all the devices from
  the wired down list have been probed, the code can then autodetect and
  autoattach any devices that remain unassigned.

- Apparently some tape changers (hi Ulf!) return 'not ready/medium not
  present' when the magazine is loaded but a tape has not been put in the
  drive yet. This causes an open(/dev/ch0) to fail and prevents you from
  using the changer.c utility to load the first tape into the drive. My
  HP changer does not behave this way. The workaround is to manually load
  a tape into the drive before attempting to use the changer program, but
  you can get in trouble if you accidentally eject a tape without loading
  a new one and you're at a remote location: you won't be able to load
  any tapes anymore. I'm not sure what the correct software solution is
  for this but ideally there should be one.

- I should not be doing this: I'm the NIS guru, not the SCSI guru.
  (This is not my beautiful code. How did I get here? My god: what
  have I done?)
1997-01-25 20:27:13 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Joerg Wunsch
7b0951f009 Slightly re-order the sequence of commands issued, so try to send
the START UNIT command before testing whether the device is ready.
Maybe it should be done even earlier, i'm not 100 % sure.

Again, CD changers will most likely benefit from it.

While i was at it, also made the debugging case a little more verbose
about why the cdopen() yielded an ENXIO.  (Only in effect when
SCSIDEBUG is specified.)

Should eventually also go into 2.2.
1996-12-24 11:35:24 +00:00
Joerg Wunsch
802e82cdd2 Do something Peter Dufault long since intended to do: make a current
error code with ASC/ASCQ 4/1 (``Logical unit is in the process of
becoming ready'') non-fatal.  Retry the operation until it will
eventually either yield a real error condition, or finally succeed.

Devices like CD changers or tape drives with a freshly inserted
cartridge should benefit from this.

Should go into 2.2 after some testing in -current.  I'd like to see
this in the release if possible.
1996-12-24 11:32:41 +00:00
Joerg Wunsch
2f401e5f09 Reorder the wildcard entries to the end of the quirks list, so they
will be probed last.  It's otherwise impossible in some cases to get
SCSI type override working.

Supposed fix for PR # kern/2225.
1996-12-20 20:43:45 +00:00
Joerg Wunsch
fb2efb8992 Add an entry for Ricoh's MO drives.
Submitted by:	msmith@atrad.adelaide.edu.au (Michael Smith)
1996-12-14 09:57:04 +00:00
Jordan K. Hubbard
0b3870cb60 Close PR#2198:
I've added an installation from optical disk drive facility.
	This enables FreeBSD to be installed from an optical disk, which
	may be formatted in "super floppy" style or sliced into MSDOS-FS
	and UFS partitions.

	Note:  ncr.c should be reviewed by Stefan Esser <se@freebsd.org>
	and cd.c by Joerg Wunsch <joerg@freebsd.org> before bringing this
	into 2.2.

Submitted-By: Shunsuke Akiyama <akiyama@kme.mei.co.jp>
1996-12-13 07:55:14 +00:00
Joerg Wunsch
5a4a0aacba Slightly change the `od' driver quirk for the Matsushita LF-1000
series drives, and add the NAKAMICHI MO drive RMD-5200-S.

Closes PR # kern/2200: Change/Add new optical di...

Submitted by:	akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1996-12-13 00:00:51 +00:00
Joerg Wunsch
7a9717ae8e Default the CD-ROM devices to a single LUN only. Too many of them are
broken and respond to multiple LUNs.

Reviewed by:	rv@groa.uct.ac.za (Russell Vincent)
1996-12-07 22:45:15 +00:00
Bruce Evans
4eb73cdaff Removed all references to b_cylinder (aka b_cylin). It was evil and
hasn't been used for a year or two since disksort() started sorting
on b_pblkno.
1996-12-01 16:34:41 +00:00
Søren Schmidt
7cb29d3394 This update adds the support for != 512 byte sector SCSI devices to
the sd & od drivers. There is also slight changes to fdisk & newfs
in order to comply with different sectorsizes.
Currently sectors of size 512, 1024 & 2048 are supported, the only
restriction beeing in fdisk, which hunts for the sectorsize of
the device.
This is based on patches to od.c and the other system files by
John Gumb & Barry Scott, minor changes and the sd.c patches by
me.
There also exist some patches for the msdos filesys code, but I
havn't been able to test those (yet).

	John Gumb (john@talisker.demon.co.uk)
	Barry Scott (barry@scottb.demon.co.uk)
1996-12-01 11:25:38 +00:00
Joerg Wunsch
bf65a4116b Add the Quantum DLT drives. All of them grok SC_MORE_LUS, so the tape
library devices will properly come up with all LUNs detected.

Submitted by:	dawes@Physics.usyd.edu.au (David Dawes)
1996-11-30 07:39:37 +00:00
Poul-Henning Kamp
3faaf0b64a Rogue entry for DEC DLT2700
Reviewed by:	julian & phk
Submitted by:	Andre Albsmeier <Andre.Albsmeier@mchp.siemens.de>
1996-11-28 09:51:03 +00:00
Masafumi Max NAKANE
1473a85114 Back out my previous change.
It probably broke the support for the device.

Pointed-Out by:	joerg
1996-11-09 02:44:11 +00:00
Masafumi Max NAKANE
9358777784 Typo, MATSHITA -> MATSUSHITA.
2.2 & 2.1.6 candidate.
1996-11-07 18:13:57 +00:00
Joerg Wunsch
83e9a3b6fc Fix the sequence at odopen() time so the driver actually notices if a
medium with another size is being inserted.  Right now, this case was
broken and led to a situation where a medium could only be replaced
with another one of the same size.

Closes PR #kern/1830: Can't mount optical disk...

Submitted by:	akiyama@kme.mei.co.jp (Shunsuke Akiyama)
1996-11-06 17:31:14 +00:00
Joerg Wunsch
b99dd17277 Updates and bugfixes to the worm driver:
. also detect the Phlips CDD2000; it's software-compatible with the HP part

Submitted by:	cau@cc.gatech.edu (Carlos Ugarte)

. correct the blocksize handling for CD-DA tracks, and fix multitrack
  handling

Submitted by:	nsayer@quack.kfu.com (Nick Sayer)

2.2 candidates!
1996-11-06 13:33:53 +00:00
Justin T. Gibbs
1e03c19aab Try number two. Add missing paren in MSG_IDENTIFY macro. 1996-10-07 03:53:43 +00:00
Justin T. Gibbs
b109ceda2f Bring in bug fix from 'SCSI' branch. 1996-10-06 22:50:56 +00:00
Justin T. Gibbs
5a3df2165a Bring this over from the SCSI branch. I need it to bring in the fixes to
the aic7xxx driver.
1996-10-06 02:14:31 +00:00
Bruce Evans
a7f8f2ab55 Changed cncheckc() interface so that it is 8-bit clean - return -1
instead of 0 if there is no input.
1996-09-14 04:31:09 +00:00
Bruce Evans
28eda575a7 Restored a non-devconf comment that was removed with devconf. 1996-09-10 23:37:52 +00:00
Bruce Evans
b568ea4e01 Removed more devconf leftovers. 1996-09-10 23:31:13 +00:00
Poul-Henning Kamp
40f3771f7f Various cleanups for remanents of devconf. 1996-09-08 10:44:18 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Satoshi Asami
1225e2435d Second phase of merge, get rid of more machine-independent-dependencies.
Get rid of pc98/pc98/pc98_device.h.

Submitted by:	The FreeBSD(98) Development Team
1996-09-03 10:24:29 +00:00
Joerg Wunsch
e7e3f60d66 Do not test_unit_ready() before starting the unit... 1996-08-17 20:50:26 +00:00
Peter Wemm
2176b02c56 The sd and od drivers didn't check for negative block numbers (like wd.c
does) before calling dscheck().  dscheck() doesn't appreciate this and
calls Debugger() and returns without setting bp->b_error.

This can happen when there is a casting error and offsets > 2G are
converted to negative off_t's in the disk tools.  (dumpfs used to do this).
1996-08-02 06:10:49 +00:00
Poul-Henning Kamp
cba8a5ddd3 Make a "DWIM" function for adding [bc]devsw entries for bdev drivers.
Saves about 280 butes of source per driver, 56 bytes in object size
and another 56 bytes moves from data to bss.

No functional change intended nor expected.

GENERIC should be about one k smaller now :-)
1996-07-23 21:52:43 +00:00
Joerg Wunsch
6bc025e10d Turn SCSIDEBUG into a new-style option. 1996-07-14 10:46:56 +00:00