They are shared between UDP over IPv4 and over IPv6. To prevent all
possible kernel build failures wrap them in #ifdef _SYS_PROTOSW_H_.
Prompted by feedback from jhb@ and jrtc27@ on c93db4abf4.
Add some extra customization points so that FreeBSD build
can be adapted to local requirements.
We use these to minimize changes to share/mk
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37617
Early versions of this code had a free, but this one doesn't need
it. Remove the forgotten free(vv); from earlier versions.
Fixes: ed56dcfc6b
Noticed by: Michael Butler
Sponsored by: Netflix
Do the standard command line parsing... With a small twist to deal with
the quirks of booting via linuxboot to the initrd from the command line
in shell.efi and other observed oddities.
Sponsored by: Netflix
Copy the arg that sets a variable to maximize the reuse of this
routine. There are places we call it from that are const char * and it
might not be safe to cast that away.
Sponsored by: Netflix
main() of the boot loader is expected to call devinit() early. We do
this at the same time we do it in the EFI loader (except we don't have a
buffer cache here, we don't need to initialize time and we don't have
special efi partition handles to enumerate). This is just after we probe
for the console.
Sponsored by: Netflix
Copy EFI's bootinfo.c and make minor adjustments for kboot's needs. Do
not connect this to the build just yet until other pieces are in place.
Sponsored by: Netflix
bootinfo.c is about to be shared with kboot since they create
substantially similar environments / metadata tagging / etc. Tag this
with #ifdef EFI for the moment until the proper abstracting out can
happen.
Sponsored by: Netflix
Use only one callout structure per tcpcb that is responsible for handling
all five TCP timeouts. Use locked version of callout, of course. The
callout function tcp_timer_enter() chooses soonest timer and executes it
with lock held. Unless the timer reports that the tcpcb has been freed,
the callout is rescheduled for next soonest timer, if there is any.
With single callout per tcpcb on connection teardown we should be able
to fully stop the callout and immediately free it, avoiding use of
callout_async_drain(). There is one gotcha here: callout_stop() can
actually touch our memory when a rare race condition happens. See
comment above tcp_timer_stop(). Synchronous stop of the callout makes
tcp_discardcb() the single entry point for tcpcb destructor, merging the
tcp_freecb() to the end of the function.
While here, also remove lots of lingering checks in the beginning of
TCP timer functions. With a locked callout they are unnecessary.
While here, clean unused parts of timer KPI for the pluggable TCP stacks.
While here, remove TCPDEBUG from tcp_timer.c, as this allows for more
simplification of TCP timers. The TCPDEBUG is scheduled for removal.
Move the DTrace probes in timers to the beginning of a function, where
a tcpcb is always existing.
Discussed with: rrs, tuexen, rscheff (the TCP part of the diff)
Reviewed by: hselasky, kib, mav (the callout part)
Differential revision: https://reviews.freebsd.org/D37321
For the TCP protocol inpcb storage specify allocation size that would
provide space to most of the data a TCP connection needs, embedding
into struct tcpcb several structures, that previously were allocated
separately.
The most import one is the inpcb itself. With embedding we can provide
strong guarantee that with a valid TCP inpcb the tcpcb is always valid
and vice versa. Also we reduce number of allocs/frees per connection.
The embedded inpcb is placed in the beginning of the struct tcpcb,
since in_pcballoc() requires that. However, later we may want to move
it around for cache line efficiency, and this can be done with a little
effort. The new intotcpcb() macro is ready for such move.
The congestion algorithm data, the TCP timers and osd(9) data are
also embedded into tcpcb, and temprorary struct tcpcb_mem goes away.
There was no extra allocation here, but we went through extra pointer
every time we accessed this data.
One interesting side effect is that now TCP data is allocated from
SMR-protected zone. Potentially this allows the TCP stacks or other
TCP related modules to utilize that for their own synchronization.
Large part of the change was done with sed script:
s/tp->ccv->/tp->t_ccv./g
s/tp->ccv/\&tp->t_ccv/g
s/tp->cc_algo/tp->t_cc/g
s/tp->t_timers->tt_/tp->tt_/g
s/CCV\(ccv, osd\)/\&CCV(ccv, t_osd)/g
Dependency side effect is that code that needs to know struct tcpcb
should also know struct inpcb, that added several <netinet/in_pcb.h>.
Differential revision: https://reviews.freebsd.org/D37127
This should be spelt IMGACT_BINMISC to match the filename. The option
name does not appear outside of sys/conf and this module is typically
used via the kernel module imgact_binmisc.ko.
MFC After: 2 weeks
Notable upstream pull request merges:
#13782 Fix setting the large_block feature after receiving a snapshot
#14157 FreeBSD: stop using buffer cache-only routines on sync
#14172 zed: post a udev change event from spa_vdev_attach()
#14181 zed: unclean disk attachment faults the vdev
#14190 Bump checksum error counter before reporting to ZED
#14196 Remove atomics from zh_refcount
#14197 Don't leak packed recieved proprties
#14198 Switch dnode stats to wmsums
#14199 Remove few pointer dereferences in dbuf_read()
#14200 Micro-optimize zrl_remove()
#14204 Lua: Fix bad bitshift in lua_strx2number()
#14212 Zstd fixes
#14218 Avoid a null pointer dereference in zfs_mount() on FreeBSD
#14235 nopwrites on dmu_sync-ed blocks can result in a panic
#14236 zio can deadlock during device removal
#14247 Micro-optimize fletcher4 calculations
#14261 FreeBSD: zfs_register_callbacks() must implement error check
correctly
Obtained from: OpenZFS
OpenZFS commit: 59493b63c1
The reference to the "DARPA Internet" seems not quite
up to date in 2022, so move that to the HISTORY section.
Mention RFC 2780 and RFC 5237.
Obtained from: NetBSD
MFC after: 3 days
These facilitate customizing the build with minimal churn.
Reviewed by: stevek
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37592
When PCI_IOV is not enabled, do not attempt to call
iflib_softirq_alloc_generic(...IFLIB_INTR_IOV), as it results
in boot-time warnings similar to:
taskqgroup_attach_cpu: qid not found for iov cpu=2
ixl2: taskqgroup_attach_cpu failed 22
Instead, make it conditional on PCI_IOV like the other
SR-IOV related code.
Reviewed by: erj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37609
dma_map_sgtable internally uses the dma_map_sg_attrs helper. The problem is
that dma_map_sg_attrs returns the number of entries mapped, whereas
dma_map_sgtable returns nonzero on failure. This leads to dma_map_sgtable
returning non-zero-but-positive values which tricks other areas of the stack
into thinking nents is a valid pointer.
This checks if nents is valid and returns zero if so, updating the nents field
in sgt. This fixes PRIME render offload with nvidia-drm.
Fixes: 9202c95f47 ("linuxkpi: Add dma_{un,}map_sgtable")
OVMF ships some static ACPI tables. This worked in the past but won't
work in the future when we support devices like tpms. They require a TPM
ACPI table. So, we have to dynamically create ACPI tables depending on
the bhyve configuration.
Bhyve has much more information about the system than OVMF. Therefore,
it's easier for bhyve to build up some ACPI tables. For that reason, it
would be much better to use the ACPI tables provided by bhyve instead of
building some tables by OVMF.
At the moment, OVMF always creates a SPCR table. Maybe someone depends
on it. So, we have to build it by bhyve too before we can patch OVMF to
install the tables provided by bhyve.
Reviewed by: markj
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37591
This reverts commit 68c3f03021. There are
some weird crashes when KVMs switch caused by this, so revert this
commit until they are sorted out.
Reported by: cy@
Sponsored by: Netflix
The zlib project has issue https://github.com/madler/zlib/issues/633 to
document its continued use of old K&R-style function definitions.
Suggested by: delphij@
Sponsored by: Netflix
These are declared as extern in a number of files (some with the wrong
return type). Centralize this in modinfo.h and remove a few extra stray
declarations as well that are no longer used. No functional change.
Note: I've not tried to cope with the bi_load() functions which are the
same logical thing. These will be handled separately.
Sponsored by: Netflix
When processing abds, we execute 1 `kfpu_begin()`/`kfpu_end()` pair on
every page in the abd. This is wasteful and slows down checksum
performance versus what the benchmark claimed. We correct this by moving
those calls to the init and fini functions.
Also, we always check the buffer length against 0 before calling the
non-scalar checksum functions. This means that we do not need to execute
the loop condition for the first loop iteration. That allows us to
micro-optimize the checksum calculations by switching to do-while loops.
Note that we do not apply that micro-optimization to the scalar
implementation because there is no check in
`fletcher_4_incremental_native()`/`fletcher_4_incremental_byteswap()`
against 0 sized buffers being passed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14247
I read the following article and noticed a couple of ZFS bugs mentioned:
https://pvs-studio.com/en/blog/posts/cpp/0377/
I decided to search for them in the modern OpenZFS codebase and then
found one that matched the description of the first one:
V593 Consider reviewing the expression of the 'A = B != C' kind. The
expression is calculated as following: 'A = (B != C)'. zfs_vfsops.c 498
The consequence of this is that the error value is replaced with `1`
when there is an error. When there is no error, 0 is correctly passed.
This is a very minor issue that is unlikely to cause any real problems.
The incorrect error code would either be returned to the mount command
on a failure or any of `zfs receive`, `zfs recv`, `zfs rollback` or `zfs
upgrade`.
The second one has already been fixed.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Damian Szuberski <szuberskidamian@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes#14261
When a boot environment has been booted via the bootonce feature,
userboot clears the bootonce value from an nvlist but fails to write the
updated nvlist back to disk.
The failure occurs because bhyveload opens the guest boot disk image
O_RDONLY, fix this by opening it O_RDWR.
Reviewed by: imp, markj, jhb
Differential Revision: https://reviews.freebsd.org/D37274
The NONE parameter has been deprecated for more than 20 years
but was never removed, its useful to simplify the sendmail
management.
This reverts commit 7cadc52638.
Extend peer deleted notifications (which are the only type right now) to
include the reason the peer was deleted. This can be either because
userspace requested it, or because the peer timed out.
Reviewed by: zlei
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37583
